Used Equipment Tillage For Sale In Hills

29' Vertical Tillage Tool.

NEW Salford I-2100 Series Vertical Tillage Bar. A true vertical tillage bar! 24' working width, front blades: 22" x 5mm 13 wave, rear blades: 22" x 5mm 8 wave, 7.5" spacing, 1-5/8" coil shanks, mainframe tires 8 bolt 305/70 x R22.5 recapped truck tires,...

49' 9" vertical tillage, w/ scrapers attached to the c-cushion bearings, 10 degree gang angle. 7" blade spacing and 22" disc blades.

25', 9900 Pull-Type Wheel Kit, 12.5X16 Tires w/8 Bolt Hubs, Light Package, SMV Sign, Ballast Blocks, Rented 400 Acres, Average Tine Length 7 3/4"

32' 6", gauge wheels, 4 guage blades, front blades: 20" 11/16, rear blades: 21" 5/16, 3 bar harrow coil tine 16", rock flex, standard leveling.

2007 John Deere, 9 Shank Disc Ripper, C Cushion, Hydraulic Wing Float & Hydraulic Depth adjust, New bearings and blades w/ 500 acres on them, 24' blades

7 shank, c-cusion, FB=23.75, RB=23.5, Approx.

Finisher/harrow 39'9"

42' XXL PULIVERIZER W/ SCRAPPERS

CaseIH TigerMate ii 46.5'm 6" shank spacing, 9" sweeps on front, 7" sweeps on last row of shanks, shanks are tight, 3 bar coil tine harrow.

32' pulverizer, w/ 20" notch ductile iron wheels, and scrappers. Telescoping drawbar (from 16'4" to 22'10") Horse power requirements as independent tool: 3 to 55 HP per Foot. Horse power requirement as companion tool: 1 to 3 HP per Foot.

52' WFP PULVERIZER W/ SCRAPPERS

Brillion 46' WFP Pulverizer, w/ scrappers.

11 shank disc ripper.

Gladiator 1205-1630 Rock Point 1.5 dry drop fertilizer tubes-16 Row, 9T Twin Bin Gen II, 2 Sec, Montag Blockage Monitor, No Rear Hitch

Gladiator 1205-1630 Single 1.5" dry drop tubes Rock Points, 16 Row Units 9-Ton Montag TwinBin, 4 Sec, Blockage Monitor, No Rear Hitch

4-7 mph recommended speed of operation, recommended working depth 8"-16", recommended tractor power range 330-525 PTO hp. Spring reset subsoil parabolic Shanks: 3,000 lb point Load, 1-1/4" x 4" shank size with wear bar, 22" Trip height, 39" underframe...

Interceptor 8050-20, 22" 5MM Excalibur Blades 2/32 Flutes, No Daily Grease, Constant Flow Hyd Wing Down Pressure, Transport Width 13'5", Working Width 20', Working Width RTK 19", Weight 18,407#, Max Depth 5", Uses 13 to 15 HP per foot, Speed 8-10 mph,...

Landsman 6205-27, Guardian Hitch 27'-45', 9" edge on Spring Shank, 1/4" x 10" Sweep, 3 Row Tine & Round Reel 27', No Rear Hitch or Wheel Selection, Hyd Gang Adj 27'