Used Equipment Tillage Equipment For Sale In Appleton

Unknown Model, 8' pull type cultipacker, 2 rows of packer wheels, front row 14" diameter, back row 11" diameter

Lift, tandem axle with 11L-15 implement tires at 50% International 415 cultimulcher, 16' wide, 2 rows of 17" diameter packer wheels with most mud scrapers on unit, 2 rows of spring tooth tines between rollers with good points, hyd.

Unknown Model - 24' Spike Tooth drag cart, 4 - 72" drag sections, manual lift and fold

Brillion 12' cultimulcher, 2 rows of packer wheels that are approximately 14 1/2" in diameter, 1 row of 10 spring C tines, has hydraulic ram for raising and lowering

Anderson Rock Picker, unsure model number, believe it is a 6BP, 5' wide, 4 bat reel, 540 PTO, hydraulic lift and dump, jack, 14Lx15 implement tires at 50%, no welds noticed

Glencoe chisel disk, 11' wide, 20" disks that are cushion mounted with 7.5" spacing, 4 deep till spring loaded shanks, 5 rear spring loaded shanks, 5 bar spike tooth harrow, walking tandems, tires at 70%, hydraulic lift with rams and hoses, jack

Landoll 2205; two rows of spring loaded disks in front; 5 spring loaded shanks in rear; 18 inch disks with 15 inch spacing; 11 foot total width; hydraulic lift with rams and hoses; Tires 80%.

ALL NEW BOTTOM POINTS, SHARES, AND COVER BOARDS! White 508 5 bottom 18" mold board plow, spring auto-reset, semi mount, hydraulic ram, 5 spring loaded coulters

Lift with cylidner, 11' wide Glencoe SS9 Chisel Disk, 9 spring loaded shanks, replaceable point about 60%, spring loaded disk gangs, disk blades average 17.5" dimeter at 7.5" spacing, has clod buster on back, 9.5L-15SL implement tires at 60%, has hyd.

Krause 2869 9 shank disk chisel, front cushion gang disk, blades average 16.5" diamter at 8" spacing, 9 shear bolt protected shanks, 5 twisted shovels are almost new, 4 are half used, has ram for lift

NEW - Woods RT72.40 Forward rotation tiller, 2018, limited category 1 and category 1 three point hitch, 20-50 HP tractors, 540 PTO with slip clutch, oil bath gear drive, maximum tilling depth 7", 3 year gear box warranty, woods orange in color

Kewanee 273 12' Cultimulcher, 14" packer wheels, 2 rows of C tines, 15" tires

Bush Hog 1560; 11 foot wide - manual and adjust for depth; hydraulic lift with hoses and rams; 7 shanks with heavy duty springs, 19 inch disk with 7.5 inch spacing; gang is spring loaded; dual wheels.

Case IH 370 12' disk, rear disk blades average 17" diameter with 7.5" spacing, new 18" front blades at 7.5" spacing, has all scrapers, no welds noticed

ALL NEW BOTTOM POINTS, SHARES, AND COVER BOARDS! White 508 5 bottom 18" mold board plow, spring auto-reset, semi mount, hydraulic ram, 5 spring loaded coulters

Landoll 1605S-30 5 shank subsoiler, 3 point mount, auto reset spring loaded shanks at 30" spacing, 2 adjustable gauge wheels with used P21575R15 tires at 30%, 14' 2" total width

Case IH 6500 Conservtill Chisel Disk, 10' 6" wide, 9 spring loaded shanks, 8 have 18" sweeps at 70%, one has 4" chisel point at 50%, spring loaded front disk gang with 18" disk blades average at 8" spacing, front disk gang is independantly hydraulic operated,...

Lift with ram, no welds noticed Case 1800 Chisel plow, 10 spring loaded shanks, twisted shovels at 35%, hyd.

DMI Ecolo-tiger 530B 5 shank ripper, 1998?, overall width 14', auto reset spring loaded shanks spaced at 30", 2 front disk gangs that can be raised independently of shank, front blades average 19" at 15.5" spacing, rear blades average 19.5" at 15.5" spacing,...

DMI Coulter Champ II HD Ripper, CC2HD, 12' wide, 9 auto reset spring loaded shanks at 15" spacing, rock flex disk gang that can be raised and lowered indepently of shanks, disk blades average 18.5" diameter at 7.5" spacing, has depth control stops, 12.5SL-15...

DMI Coulter Champ II HD Ripper, 15' wide, 11 auto reset spring loaded shanks at 15" spacing, rock flex disk gang that can be raised and lowered independently of shanks, disk blades average 17" diameter at 7.5" spacing, has depth control stops, 12.5SL-15...

NEW - Woods LRS84P Landscape Rake, 2018, for category 1 tractors 20-45 HP, 5 position pivot angles at 15 degree spacing both forward and reverse, manual angle adjust, tines 1" wide at 1" spacing, 5/16" thick, weight 288 lbs

Call for best price!!!