Used Equipment Scrap Processing Demolition Equipment For Sale In Brookshire

Balderson Blade with Quick Connect for Wheel Loader 988 In good condition was used with a 988F wheel loader.

Fits Caterpillar 140H, 143H, 160H, 163H, 104G

It has fresh tires. 2007 Troxell 130 BBL Kill Trailer / Vacuum Trailer, 2 compartment 40/90 split,Carboline Plasite 4300 brand new liner coat, hydrocholric acid resistant liner, 11R24.5, Fixed Axles,Painted aluminum wheels, fresh paint all around the...

Works good, good rails. Solid frame, no rust or dents, etc. 1999 Galbreath Model: A5-OR-402 Roll Off Trailer, Tri-axle with big tires, 30,000lbs G.VW.R, 21,200lbs G.A.W.R., cable hoist roll off, 5th wheel.

6 x 14.00 x 24 Tires Only @ 50% Remaining.

Both Blade and bucket for 988B

Original Cat Multi Shank Ripper Came Of A 140H Has 3 Cat Ripper And 8 Cat Scarifier Shanks, In Excellent Conditoin . Complete With Mounting Rods.

Very, very powerful Wittig HYDRAULIC vacuum pump. 2 Available: One has 18,000 miles and the other has 23,000 miles. Like new tires in the front, AC blows cold, no tears on seats or broken switches or panel, clean dash and interior.

Ready to work, no check lights, no air leaks or oil leaks. 2011 Peterbilt 367 Tri-Axle Vacuum Truck with 238,000 miles. Sells DOT inspected. PTO is activated outside of cab on drivers side, with clutch lever and pto lever so you dont have to hop in the...

Mack 427HP engine, eaton fuller 13 speed, NVE vacuum pump with transfer gear pump too, tandem axle, air ride, 3,500 gallon vacuum tank, 3.90 ratio, 230"in wheelbase, 12,000lbs fronts and 40,000lbs rears.

2001 Mack RD688S Bobtail Kill Truck/ pressure truck/ pump truck with 60BBL Vacuum tank, with 260,000 miles, Gardner Denver Tee Triplex pump at 10,000psi, bowie centrifugal pump, tandem axle, 20,000 fronts and 46,000 rears.

Absolutely gone through by us, all agauges working in control panel and inside cab, no check lights, no hydraulic leaks or etc. 2008 International 7600 Vactor HXX Hydroexcavator with a big blower, Hibon 8702, 29"HG, 5600 cfm, Caterpillar C13, Eaton Fuller...

Good trailer, ready to work. Air brakes, good tires, the trailer has 18 pair of D rings for tie down along the both sides, mechanical removable neck. 4 Beam style frame, with tail roller in the back.

Maxitorque 9 speed transmission, Mack AC380 engine, 380HP, chrome cumper, chrome exhaust, mack orginal chrome mirrors, 90% tires all around, aluminum wheels fronts. 18k fronts and 44k rears on camelback suspension.

Beautiful monster 2006 Mack Granite CV713 Gin Pole Winch Truck with 123,000 miles!!! Mack AMI 12.0L engine, 338" Wheelbase, 29" poles, 34" bed, 3 winches: Rufnek 130,000lbs, Rufnek 80,000lbs and Rufnek 20,000lbs.

Differential Lock, State DOT, Turbo Heavy specs, double frame, 20,000lbs fronts and 46,000lbs rears. This is what we do. Cab and chassis. Truck sells ready to work, it has gone through the shop by us.

One has 60k miles and the other has 102k miles, Cummins ISX 475HP, Eaton Fuller 18 speed, Gardener Denver TEEAC 5,000psi pump, MCM 3X4 pump, NVE Challenger 367 vacuum pump, NuFlow Meter Analyzer.

Tandem axle, full tank tilt and full open hydraulic rear gate. The truck will has new filter bags. Caterpillar C-13, 25,000 miles, eaton fuller 10 speed, Engine hours are 5,102 hours.

Eaton Fuller 10 speed, double frame, heavy spec, 20,000lbs fronts and 46,000lbs rears. Has a 12 cubic yard debris body, 4,000psi quintuplex pump all in a heated enclosure. Air lift 3rd axle.

Hydraulic tank tilts and full open hydraulic rear gate. 4" inlet and 6" outlet. Powered by a very powerful Wittig vacuum pump. 2005 Sterling Vacuum Truck DOT CODE/HAZMAT/ 407/412. This truck has been fully refurbished and is ready to work.

MADE IN USA NEW / UNUSED SCARIFIER NEW UN TO FIT 140M, 12M, 160M . COMES EQUIPPED WITH 5 SHANKS IN STOCK READY FOR DELIVERY.

Good Tires All Around, Has A Blower

Beautiful 2013 Kenworth T800 Winch Truck ready to get the job done. Cummins ISX 450HP, wet kit, engine, flat top sleeper cab, Eaton Fuller 13 speed, 247,000 miles. Real clean truck, no check lights, air leaks or oil leaks.

Fresh oil changed, greased and lubed, no air leaks or check lights, Works good, sells ready to get the job done. 2007 Mack CH613 Winch Truck with a vacuum pump, ready to work. 353,000 miles, Maxitorque 13 speed transmission, Tulsa 45,000lbs hydraulic...