Used Equipment Radiator Supply House Construction Parts For Sale In Tulsa

ESCO 36" wide Bucket, with side cutters, 5 teeth, lifting eye, Has pins, fits Volvo EC140 Excavator.

There is 40' top, 40' mid, 20' mid and new 20' stab section for total length of 120'. Hammer maintenance and rebuild at factory in 2016, not used since. Hammer and leads currently in Tulsa Oklahoma

623F SCRAPER FLOOR, REBUILT, LIKE NEW.

D6D Welder Tractor w/(4) DC-400 welders, compressor and lead boom Quincy 390 compressor, A/C outlets Tack Rig

Hyd counterweight with Cat cwt interchangeability. Std 20' boom (longer optional). Hydraulic boom stop. Cat D8K with Challenger CP583K Hydraulic Pipelayer Attachment Cat D8K w/CHALLENGER SERVICES CP583K Pipelayer Attachment, 140,000 lbs.

561C Hydraulic Pipelayer S/N 62A00335, 40,000 lbs Capacity, Recent Conversion, Hydraulic counterweights, New Seat and Operator Compartment, Hydraulic Boom Kick-Out, 20" Pads

Cat D8K with Challenger CP583K Hydraulic Pipelayer, 20' boom, 28" pads Tail winch, Complete service, New radiator.

Reconfigured March 2010. CAT D7G Welder Tractor w/4 - Lincoln DC-400 welders Caterpillar D7G WELDER TRACTOR equipped with (4) Lincoln DC-400 Welders, Quincy 390 Compressor, Lead boom and outlets.

Hydraulic boom stop. D7G Equipped with NEW (2009) Challenger Services Pipelayer Attachment, Standard 24' Boom, 30" Pads, M30 2 speed planetary load line winch with free fall, M30 single speed planetary boom winch, Hi volume hyd pump, cwt interchange w/Cat.

Counterweights Caterpillar 561 Pipelayer, S/N 62A00096 Recent Hydraulic Conversion, 2-speed load winch 20 Foot Boom, 18" Pads, Hydraulic Counterweights. Cat 561C Pipelayer 62A00096, Hydraulic Conversion, 2 speed load winch, Hyd.

Challenger Tack Rig CAT D6D Welder Tractor w/ (4) LINCOLN DC-400 welders, Quincy 390 Compressor, Lead boom and A/C outlets.

Challenger CP561N Hydraulic Pipelayer Attachment on D5N LGP, 40,000 lbs.

Cwt Caterpillar 561D Pipelayer S/N 54X00513 Two speed load winch,20 foot boom, 18" pads Hydraulic counterweights 561D Hydraluic Pipelayer, Two speed load winch, 20' boom, 18" pads, hyd.

Pipelayer (2009) 24' Boom, 30" pads, MOUNTED on Cat D7G LGP S/N 72W00540 Challenger CP572G Hydraulic Pipelayer (NEW pipelayer-on D7G LGP), 90,000 lb.capacity, 30" pads Challenger CP572G Hydraulic Pipelayer equipped with CP572G LGP, 90,000 lbs lift capacity,...

D7G w/ NEW Challenger Services CP572G Pipelayer Attachment,90,000 lb.cap. Equipped with New (2009) Challenger Services CP572G 90,000 Lbs. Pipelayer Attachment, Standard 24' Boom 30" Pads, M30 2spd planetary load line winch w/free fall, M30 single speed...

D6N XL COMBO Hydraulic Pipelayer D6N XL Hydraulic Pipelayer S/N AKM00602 Tractor: 2004 Model / Attachment: 2007 Model, 25 Ton Capacity, 6 Way Blade, Hours: 3636, 24" Pads

1-Front bumper w/hydraulic lead boom for welding leads 2.5t@3.5 meters. 1-low frequency automatic shut-off protection 1-Quincy 350 air compressor (electric drive) with 36 cfm/235 psi max and 120 gal.

Pads, 20' boom, 20 ton capacity 1999 Model with 3645 hrs 110 hp Hydraulic winches Free fall on load winch 20" pads 20' boom Caterpillar 561M Challenger Pipelayer equipped with hydraulic counterweights, 20?

1-Low frequency automatic shut-off protection 1-Quincy 390 air compressor (electric drive) with 36 cfm/235 psi max and 120 gal air tank. Cat D6E Welder Tractor - Pipeline Welder Package w/100% UC, 5-Lincoln XMT-350 inverter welders for automatic or manual...

561N Hydraulic Pipelayer S/N TAD00135, 2008 Model, 20 Ton Capacity, Hours: 500, 30" Pads, Hydraulic Counterweights

CAT 561N Hydraulic Pipelayer S/N TAD00139, 2008 Model, 20 Ton Capacity, Hours: 345, 30" Pads Hydraulic counterweights

16-30 Pipe Bending Machine with a Hatz SILENCED diesel engine Challenger 16-30 Pipe Bender with Hatz "SILENCED" Diesel.

4'1" Articulating Jib, 30x72" Platform Side Entry, 180 Degree Hyd Platform Rotator 2007 JLG 450A Articulating Boom Lift: * Articulating Jib: 4' 1" * Platform: Side Entry, 30 x 72" * Inward Swinging Self-Closing Gate * 180 Degree Hydraulic Platform Rotator...

Continuous turntable rotation • Locking turntable covers • Zero tailswing • Positive traction drive • 2 speed wheel motors • 12V DC auxiliary power • Engine protection package • Anti-restart engine protection • Auto engine fault shutdown • Engine:...

74" 1/2" Flat Faced Couplers Included Gusseted 1/2" Frame Tines 3/4" Grapple Tines Greaseable Pivot Points 10" Wide Tine Spacing Steel Hydraulic Lines 21/2" x 8" x 11/4" Cylinders Opening: 395/8" Depth: 31" Hydraulic Cylinder Shield Kit is now standard