Used Equipment Loader And Skid Steer Attachments For Sale In Lowell

32" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 3 FLARED TEETH & 2 STRAIGHT TEETH [1073550], 3 BOLT CAT-STYLE SIDE CUTTERS, CLEVIS EYE ON BACK AND DEAD PINS. MEASURES 13 7/8" BETWEEN THE EARS, 19" CTR - CTR, AND 80MM FRONT & REAR PINS.

GOOD WORKING TAKE OFF. OPENED AND INSPECTED.

DOES NOT INCLUDE DEAD PINS. MEASUREMENTS ARE 10 3/4" BETWEEN THE EARS, 17" CTR - CTR, AND 70MM FRONT & REAR PINS. 38" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 5 FLARE TEETH [1U3302], SIDE CUTTERS, AND A HOOK ON BACK.

We have pulled flat bed off truck. 2,600 gallon water tank(seperate)Makita gasoline motor, with pump 3" 265 gallons per minute, 700 gallons of fuel. Water and fuel tanks and pumps on a flat bed only no truck.

HOME MADE HYDRAULIC THUMB. 45" GP BUCKET WITH 9'9" STICK. CALL FOR MORE INFORMATION AND PRICING.

REMAN HYDRAULIC PUMP $18,450.00 NEW

WE WILL DO FINAL INSPECTION BEFORE DELIVERY REBUILT BY MCCALLISTER MACHINERY WASHINGTON, IN. ENGINE ARRANGEMENT# 4N7671 ENGINE IS OUT OF A CAT 637D S/N: 23W0638 MOTOR SCRAPER. GOOD RUNNING TAKE OUT.

24" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 4 STRAIGHT TEETH [X290], 5 BOLT SIDE CUTTERS, OVAL CLEVIS EYE ON BACK, AND DEAD PINS. 12" BETWEEN THE EARS, 17" CTR - CTR, 80MM FRONT & REAR PINS.

Flatbed with 2) 500 gallon steel tanks.

48" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 6 TEETH [8J3352].

HOME MADE HYDRAULIC THUMB. 9'9" STICK WITH 45" GP BUCKET. CALL FOR MORE INFORMATION AND PRICING.

ROOD RUNNING TAKE OUT OF A CAT 637D S/N: 23W0638 CALL FOR MORE INFORMATION AND PRICING.(219) 696-8911

Like New !! Used 1 time !! 72" Wide Blade

.76 CUBIC YARD CAPACITY. 40" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 5 TEETH [E161-], DEAD PINS, AND 4 HOLES FOR SIDE CUTTERS. 10" BETWEEN THE EARS, 15 1/4" CTR - CTR, 65MM FRONT PIN, 65MM REAR PIN.

Double Frame,full double "C". Fabco TC200 Hi Lo Transfer case. Fabco steer drive axle. Dual p/s sectors. Miles and hours(8,284 total engine hours) ecm read. We can pull bed($1,400 charge) in our shop or you can keep it.

NEW CAT TAKEOFF RUBBER TRACKS (SET OF 2)

Butler Hay Bed, fits single wheel or dual wheel chassis. Credit for removal of new pick up truck bed. Pricing starts at $7,700