Used Equipment Loader And Skid Steer Attachments For Sale In Hickory

In applications such as land clearing, forest fire prevention, roadside maintenance or power, oil or gas line right-of-way preparation or maintenance, DENIS CIMAF forestry mulchers are recognized for their productivity and effectiveness.

Replacing worn knives is a very easy. Operating Pressure [bar (psi)]: 240 (3500) Rotating Speed [rpm]: 2500 Pressure Line I.D. [# (in)]: #12 (0.75) Return Line I.D. [# (in)]: #12 (0.75) Drain Line I.D. [# (in)]: #8 (0.5) OPTIONS: Standard Sharpenable...

DAH-065B is a high-power, forestry brushcutting-mulching industrial system to be installed on most excavators or other carriers with articulated masts. DAH-065B brushcutter-mulchers are designed for vegetation control work.

Replacing worn knives is a very easy. Operating Pressure [bar (psi)]: 240 (3500) Rotating Speed [rpm]: 2500 Pressure Line I.D. [# (in)]: #16 (1.00) Return Line I.D. [# (in)]: #16 (1.00) Drain Line I.D. [# (in)]: #10 (0.675) OPTIONS: Standard Sharpenable...

Replacing worn knives is a very easy. Operating Pressure [bar (psi)]: 240 (3500) Rotating Speed [rpm]: 2500 Pressure Line I.D. [# (in)]: #16 (1.00) Return Line I.D. [# (in)]: #16 (1.00) Drain Line I.D. [# (in)]: #12 (0.75) OPTIONS: Standard Sharpenable...

DAH-150E is a high-power, forestry brushcutting-mulching industrial system to be installed on most excavators or other carriers with articulated masts. DAH-150E brushcutter-mulchers are designed for vegetation control work.

Easy replacement Easy-to-replace knives: A single nut and bolt holds the knife in place. New tilt option offers higher productivity owing to increased aggressiveness. Replacing worn knives is a snap.

Easy replacement Easy-to-replace knives: A single nut and bolt holds the knife in place. New tilt option offers higher productivity owing to increased aggressiveness. Replacing worn knives is a snap.

DAH-100D is a high-power, forestry brushcutting-mulching industrial system to be installed on most excavators or other carriers with articulated masts. DAH-100D brushcutter-mulchers are designed for vegetation control work.

Replacing worn knives is a very easy. Operating Pressure [bar (psi)]: 240 (3500) Rotating Speed [rpm]: 2500 Pressure Line I.D. [# (in)]: #12 (0.75) Return Line I.D. [# (in)]: #12 (0.75) Drain Line I.D. [# (in)]: #8 (0.5) OPTIONS: Standard Sharpenable...

Easy replacement Easy-to-replace knives: A single nut and bolt holds the knife in place. New tilt option offers higher productivity owing to increased aggressiveness. Replacing worn knives is a snap.

• High Torque, 20,000 - 30,000 ft lbs for High Production • No Carbide Tools to Replace • Low Maintenance (Greasing & Sharpening every 1,000 Stumps) • Low RPM Auger Bit (7-16 RPM) Leads to Easy Clean-up and has no High Speed Flying Debris for Safer...

20ft cut, everything works