Used Equipment Livestock Equipment For Sale In Tulsa

It can be pulled behind a small tractor, lawn mower, atv, 4-wheeler, etc. It is approximately 5 years old and is barn kept. Used pull behind pecan picker with a gas motor. It would be great it you had only a few trees to pick.

IT was used for 2 years and has been garage kept since. This is a pecan picker with a gas motor. It can be pulled with a small tractor, lawn mower, atv, etc. This is a pull behind picker.

Recently overhauled. Ford Jubilee Tractor with many implements included. 3 point implements included are a brush hog, box blade, grader blade and a dirt bucket. Starts first time and runs very strong.

D6D Welder Tractor w/(4) DC-400 welders, compressor and lead boom Quincy 390 compressor, A/C outlets Tack Rig

M30-2 speed planetary load line winch with free fall, M30 single speed planetary boom winch, High volume hyd pump for speed. 3-section directional control valve w/open center spring return, Hyd.

561C Hydraulic Pipelayer S/N 62A00335, 40,000 lbs Capacity, Recent Conversion, Hydraulic counterweights, New Seat and Operator Compartment, Hydraulic Boom Kick-Out, 20" Pads

Cat D8K with Challenger CP583K Hydraulic Pipelayer, 20' boom, 28" pads Tail winch, Complete service, New radiator.

CAT D7G Welder Tractor w/4 - Lincoln DC-400 welders Caterpillar D7G WELDER TRACTOR equipped with (4) Lincoln DC-400 Welders, Quincy 390 Compressor, Lead boom and outlets. Reconfigured March 2010.

D7G Equipped with NEW (2009) Challenger Services Pipelayer Attachment, Standard 24' Boom, 30" Pads, M30 2 speed planetary load line winch with free fall, M30 single speed planetary boom winch, Hi volume hyd pump, cwt interchange w/Cat.

Cat 561C Pipelayer 62A00096, Hydraulic Conversion, 2 speed load winch, Hyd. Counterweights Caterpillar 561 Pipelayer, S/N 62A00096 Recent Hydraulic Conversion, 2-speed load winch 20 Foot Boom, 18" Pads, Hydraulic Counterweights.

CAT D6D Welder Tractor w/ (4) LINCOLN DC-400 welders, Quincy 390 Compressor, Lead boom and A/C outlets. Challenger Tack Rig

Challenger CP561N Hydraulic Pipelayer Attachment on D5N LGP, 40,000 lbs.

561D Hydraluic Pipelayer, Two speed load winch, 20' boom, 18" pads, hyd. Cwt Caterpillar 561D Pipelayer S/N 54X00513 Two speed load winch,20 foot boom, 18" pads Hydraulic counterweights

Challenger CP572G Hydraulic Pipelayer (NEW pipelayer-on D7G LGP), 90,000 lb.capacity, 30" pads Challenger CP572G Hydraulic Pipelayer equipped with CP572G LGP, 90,000 lbs lift capacity, Hyd.

Equipped with New (2009) Challenger Services CP572G 90,000 Lbs. D7G w/ NEW Challenger Services CP572G Pipelayer Attachment,90,000 lb.cap. Pipelayer Attachment, Standard 24' Boom 30" Pads, M30 2spd planetary load line winch w/free fall, M30 single speed...

D6N XL COMBO Hydraulic Pipelayer D6N XL Hydraulic Pipelayer S/N AKM00602 Tractor: 2004 Model / Attachment: 2007 Model, 25 Ton Capacity, 6 Way Blade, Hours: 3636, 24" Pads

1-low frequency automatic shut-off protection 1-Quincy 350 air compressor (electric drive) with 36 cfm/235 psi max and 120 gal. 1-Front bumper w/hydraulic lead boom for welding leads 2.5t@3.5 meters.

Caterpillar 561M Challenger Pipelayer equipped with hydraulic counterweights, 20? Pads, 20' boom, 20 ton capacity 1999 Model with 3645 hrs 110 hp Hydraulic winches Free fall on load winch 20" pads 20' boom

Cat D6E Welder Tractor - Pipeline Welder Package w/100% UC, 5-Lincoln XMT-350 inverter welders for automatic or manual welding 4-Set shock mounts for each welder 1-Newage 100kWl05 degree rise,Alternator producing 125KVA @ 1800 rpm/60hz/230/460 volts.

561N Hydraulic Pipelayer S/N TAD00135, 2008 Model, 20 Ton Capacity, Hours: 500, 30" Pads, Hydraulic Counterweights

CAT 561N Hydraulic Pipelayer S/N TAD00139, 2008 Model, 20 Ton Capacity, Hours: 345, 30" Pads Hydraulic counterweights

An excellent attachment for loading and unloading pipe on the pipeline right of way. Challenger stick extension, 2 piece for 15 ft reach and 3 piece for 20 ft reach, attaches to most excavators with bushings and spacers.

Winch Located at Tusla OK. Came off D6T LGP s/n KJL00988

ESCO 36" wide Bucket, with side cutters, 5 teeth, lifting eye, Has pins, fits Volvo EC140 Excavator.

Hammer and leads currently in Tulsa Oklahoma There is 40' top, 40' mid, 20' mid and new 20' stab section for total length of 120'. Hammer and leads are like new. Hammer maintenance and rebuild at factory in 2016, not used since.

623F SCRAPER FLOOR, REBUILT, LIKE NEW.