Used Equipment Lifting Equipment For Sale In Lynwood

8' broom, in good condition Balderson coupler mount

Late Model, used very little, to fit 80,000 - 100,000 # excavator needs new rotator motor. If we do the work price is $35,000 New it cost $80,000

This is a Caterpillar 56" wide 3/2 demolition coupler grapple from 345C machine

3406B engine s/n 70V7602, arrangement 4N2252, all rebuilt, for 621B scraper and other applications see pictures for rebuild details and pictures, rebuild cost $15,000

From our rental fleet. Very good condition, see pictures.

We also have low hour used, call for information.

Very good condition GSD C Series Severe-Duty Grapple •The C Series is specifically designed to provide optimal performance with a quick coupler •Replaceable tine tips are abrasion-resistant Hardox steel •Boxed-tine construction creates a very high...

This bucket has extra sides for more capacity and straight edge with no teeth.

Call Dan 708-702-0080 or dscve2@ or fax 219-662-1236 7 yd HD bucket, 29.5 -29 tires are 50% except LR @ 30%. Working machine, 3039 hours on rebuilt Cummins KT19 engine, great back-up or spare machine.

One Owner, 12,000 gallon, very good condition, Yokohama 18:00-25's at 80% factory remanufactured truck Detroit 12V92TA DDEC engine, 6 months since rebuild brakes just rebuilt front, side, rear spray remote cannon / monitor see service logs attached see...

The picture in this add is of a like engine and shown for reference only Call Dan 708-702-0080 This CPL is good up to 1200 HP @ 2100 RPM, has SAE O flywheel and flywheel housing to fit various other applications.

Near new from our rental fleet

Complete engine hole in the block, right side, lost a rod call Jim Edgar or Troy Tate for pricing

Pemberton, 6 yard Trash / Light Material bucket

Engine model 6063MK33 approx 6000 hours very good running take out stored inside

With 223 hydraulic vibratory, Cat 3306, 270 HP engine, with all hyd hoses, very good condition engine s/n 7JB02195.

From our rental fleet, very good condition

NEW 25 ' boom butt section list price $44,880.

Also have CP jaw, new, stk #159 at extra cost. Low hour rom rental fleet.

Hitachi EX270 - 12' 6" length - Casting Part# SA007418 -, cylinder has been sold

Good used Scrap grapple 2 tine width 32", 3 tine width 54", weight approx. 5400 lb, capacity 3.5/5.5 cu yd, opening approx. 116", Unit is structurally in good shape with hard surface tips and no major flaws.

Good condition, see pictures

330D, 336D, 336E, 336F Near new, see pictures, has stiff arm, no stick mounting shoe Cat DB Linkage ; Pin sizes are 100mm & 90mm ; Fixed Jaw width of 48". Caterpillar linkage compatiblity.

Excavator Weight Stick Mount (lbs.) 55,000 Near new , from our rental fleet. Excavator Weight Boom Mount (lbs.) 40,000 Min. And smaller low chrome rail •Four-blade design reduces jaw wear and maintenance •Heavy-duty pivot group with flush caps for increased...

Good condition take off from 2005 TA40 unit

Bobcat 60 " forestry cutter, standard skid loader mount, requires hi-flow w/ 35GPM, very good condition

We are a LaBounty dealer. See $25,000 invoice attachment. Ready to go to work. We completely rebuilt this shear.