Used Equipment Hay And Forage Equipment For Sale In Tulsa

Original Owner. We bought a bigger one so we don't need this one. International 4400 Dt466, single axle, 29,000 gvw, air brakes, 24' box with step rail and 2500 lb lift gate. 24' box truck in excellent condition, very well maintained, used for general...

These are nice panels made with 1 5/8\\" legs and 1\\" rails all 14 gauge material. These panels are designed with 2 3/8\\" legs so you can pull the post cap and drive a t-post down them for extra stability! they have 1 3/8\\" rails - they are square...

This is a model 8042 Savage Pecan harvester (picker). It would be great it you had only a few trees to pick. It is approximately 5 years old and is barn kept. Used pull behind pecan picker with a gas motor.

IT was used for 2 years and has been garage kept since. It is in very good condition. It can be pulled with a small tractor, lawn mower, atv, etc. This is a pull behind picker. This is a pecan picker with a gas motor.

Recently overhauled. A canopy is also included. 3 point implements included are a brush hog, box blade, grader blade and a dirt bucket. Starts first time and runs very strong. Ford Jubilee Tractor with many implements included.

D6D Welder Tractor w/(4) DC-400 welders, compressor and lead boom Quincy 390 compressor, A/C outlets Tack Rig

Hydraulic boom stop. Fully serviced and ready for work. Tank under fuel tank for operator comfort. M30-2 speed planetary load line winch with free fall, M30 single speed planetary boom winch, High volume hyd pump for speed.

561C Hydraulic Pipelayer S/N 62A00335, 40,000 lbs Capacity, Recent Conversion, Hydraulic counterweights, New Seat and Operator Compartment, Hydraulic Boom Kick-Out, 20" Pads

Cat D8K with Challenger CP583K Hydraulic Pipelayer, 20' boom, 28" pads Tail winch, Complete service, New radiator.

CAT D7G Welder Tractor w/4 - Lincoln DC-400 welders Caterpillar D7G WELDER TRACTOR equipped with (4) Lincoln DC-400 Welders, Quincy 390 Compressor, Lead boom and outlets. Reconfigured March 2010.

D7G w/NEW Challenger Services CP572G Pipelayer Attachment 90,000# cap. D7G Equipped with NEW (2009) Challenger Services Pipelayer Attachment, Standard 24' Boom, 30" Pads, M30 2 speed planetary load line winch with free fall, M30 single speed planetary...

Cat 561C Pipelayer 62A00096, Hydraulic Conversion, 2 speed load winch, Hyd. Counterweights Caterpillar 561 Pipelayer, S/N 62A00096 Recent Hydraulic Conversion, 2-speed load winch 20 Foot Boom, 18" Pads, Hydraulic Counterweights.

CAT D6D Welder Tractor w/ (4) LINCOLN DC-400 welders, Quincy 390 Compressor, Lead boom and A/C outlets. Challenger Tack Rig

Challenger CP561N Hydraulic Pipelayer Attachment on D5N LGP, 40,000 lbs.

561D Hydraluic Pipelayer, Two speed load winch, 20' boom, 18" pads, hyd. Cwt Caterpillar 561D Pipelayer S/N 54X00513 Two speed load winch,20 foot boom, 18" pads Hydraulic counterweights

Challenger CP572G Hydraulic Pipelayer (NEW pipelayer-on D7G LGP), 90,000 lb.capacity, 30" pads Challenger CP572G Hydraulic Pipelayer equipped with CP572G LGP, 90,000 lbs lift capacity, Hyd.

Pipelayer Attachment, Standard 24' Boom 30" Pads, M30 2spd planetary load line winch w/free fall, M30 single speed planetary boom winch, Hi volume hyd pump, cwt interchange w/Cat, Hyd boom stop.

D6N XL COMBO Hydraulic Pipelayer D6N XL Hydraulic Pipelayer S/N AKM00602 Tractor: 2004 Model / Attachment: 2007 Model, 25 Ton Capacity, 6 Way Blade, Hours: 3636, 24" Pads

1-low frequency automatic shut-off protection 1-Quincy 350 air compressor (electric drive) with 36 cfm/235 psi max and 120 gal. 4-115 volt electrical outlets. Cat D6D Welder Tractor w/new welder package installed (Feb 2008) 4-Lincoln V-300 inverter welding...

Caterpillar 561M Challenger Pipelayer equipped with hydraulic counterweights, 20? Pads, 20' boom, 20 ton capacity 1999 Model with 3645 hrs 110 hp Hydraulic winches Free fall on load winch 20" pads 20' boom

Cat D6E Welder Tractor - Pipeline Welder Package w/100% UC, 5-Lincoln XMT-350 inverter welders for automatic or manual welding 4-Set shock mounts for each welder 1-Newage 100kWl05 degree rise,Alternator producing 125KVA @ 1800 rpm/60hz/230/460 volts.

561N Hydraulic Pipelayer S/N TAD00135, 2008 Model, 20 Ton Capacity, Hours: 500, 30" Pads, Hydraulic Counterweights

CAT 561N Hydraulic Pipelayer S/N TAD00139, 2008 Model, 20 Ton Capacity, Hours: 345, 30" Pads Hydraulic counterweights

Challenger stick extension, 2 piece for 15 ft reach and 3 piece for 20 ft reach, attaches to most excavators with bushings and spacers. An excellent attachment for loading and unloading pipe on the pipeline right of way.

Winch Located at Tusla OK. Came off D6T LGP s/n KJL00988

ESCO 36" wide Bucket, with side cutters, 5 teeth, lifting eye, Has pins, fits Volvo EC140 Excavator.