Used Equipment Hay And Forage Equipment For Sale In Marysville

Can be used on all hay varieties and all bale types. Within 20 seconds you can use the calibrator clip to calibrate both the electronics and probe sensor. The first and only handheld hay tester that includes a calibrator.

The Best Harvest Drill Probe Hay Sampler makes it easy to collect samples from hay bales for moisture and nutrient testing. The Drill Probe Hay Sampler allows one person to bag multiple hay samples quickly.

Hot Knife has 6" blade and is 110 volt electrically heated. The Hot Knife allows for easy removal of twine buildup on bale feeders.

The change in weight (grams) from the initial sample to the dry sample represents the moisture content. To determine moisture content, sample is weighed and then dried repeatedly until there is no change in the sample weight from one drying to the next.

Specifications: Hay and Haylage: 8% – 80% Straw: 8% – 25% Hay Silage: 30% – 84% Corn Silage: 40% – 76% Alfalfa: 8% – 75% Temperature range: 14°F – 176°F (-10°C - 80°C)

Use cleanout rod to push core sample into one-gallon storage bag, eliminating handling and contamination of sample. Push probe into hay to take samples 5/8" diameter and up to 18" or 24" deep.

Includes a sturdy carry case with shoulder strap. Higher-frequency, capacitive circuit improves accuracy. Repeatability in normal range of stored grain within 0.5% of air-oven standard.

Quickly measure the moisture content of hay or forage in a windrow, so that you can determine the best time to begin baling. Measures a range of 13% - 70% moisture, within 4% accuracy.

$8650 also have a Cub Cadet Z-Force 44 heavy duty Z turn mower. 70 hours! Located north of seattle. 4x4, 54 inch deck, power steering, dual hydraullics. 8 hours only! $2690 John Deere X595 diesel mower tractor with 54 inch deck.

Has an adjustable height and flow control. It fills from the top and has an attached lid. Holds up to 25 lbs. This non-corrosive, rustproof feeder is designed to protect the minerals from the elements and keep it clean.

Clevis kit mounting hardware is included. Feeding holes measure 4" diameter. A neat and convenient way to feed your sheep or goats in a nursery or at shows.

The included special clevis kit will secure to most panels and cannot be knocked off the fence. Constructed of 16 gauge steel. A great feeder to use in the lambing/kidding pen or wherever you have one or two animals.

Hay Play is the innovative new way to feed your horse its daily forage intake. This unique shape allows the feeder to be freely pushed around, but it won't run away down a slope. Just stuff hay into the screw opening of this 16” round sphere and it's...

Great for use at home or shows. Can't be knocked off or turned over. Heavy duty poly feeders with durable spring link clips that fasten easily to wire fence.

Innovative five-piece designed slow feeder box, assembles in minutes simply by installing eight bolts. Hole at the bottom for easy cleaning. 39 1/2”L x 28 1/2”W x 19 1/2”H. Made in the USA.

This sturdy steel hay feeder has 4 x 4 paneling at sides and ends of feeder to allow easy hay feeding with minimal waste. 51" long x 28" wide. Basket sides are 32 1/2" high. Height adjusts from 37" - 55".

Heavy-duty polypropylene feed scoop.

The Classic 2-in-1 Feeder is designed for goats, sheep, and calves. Unique hook-over design for convenient mounting, permanently or temporarily at shows. Galvanized steel. Combination 2-in-1 feeder holds grain and two flakes of hay.

Made of tough, impact-resistant polyethylene. 9-Quart Hook Over Trough mounts on any 2" wide board or on wire livestock panels. 37.75"L x 8.44"W x 4.72"H. When feeding multiple animals together, the narrow design and metal grid help minimize pushing and...

Molded rubber pan is the perfect size for smaller feedings, taking to shows, etc.

24" x 24" x 42". The sheet metal on the bottom helps to reduce hay waste. A great way to feed your small square bales.

Includes a clevis kit that will attach to most panels. Hay and grain self-feeders for a small group of lambs/kids.

The 24" Hook Over Feeder is made from tough polyethylene and has 16 quart capacity. Brackets adjust from 1/4" to 2 1/4". Heavy duty steel brackets allow the feeder to hang on wire, pipe and board fences.

Two eyelets provided for permanent mounting with screws (not included) if desired. Made of tough, DuraFlex plastic. Measures 9.75 inch long by 11 inch wide by 5.5 inch high, holds 6 quarts (1.5 gallons).

Ideal for goats, sheep, and miniature horses. For more permanent mountings, simply place two screws in the holes provided on the handle. The bracket fits easily over any 2” wide board to create a sturdy feed pail in the stall, on a fence or anywhere...

Powder coated steel feeder that conveniently holds both hay and grain. 21" tall x 21" wide x 14" deep. Sturdy clips on back allow for easy hanging on panels. This combination feeder is great for kidding season or the show circuit.