Used Equipment Equipment Parts For Sale In Olney

Good condition. Oliver Superior 13hole steel wheel drill. Serious inquiries only... Contact for more info.

Kongskilde 3500 Res-Till, 32' Width, Single Point Depth Control, Walking Tandems, Straight Blades, S-Tine Cultivator Shanks, Buster Bar, Double Basket. Good Condition... Olney, IL Call or Text Anytime 618.839.2928 Harrow, Walking Tandems

Massey Ferguson 820 Disk, 21' Hydraulic Fold, 7.5" Spacing, Good Bearings and Scrapers, 19" Blades. Good Paint, No Welds, Good Condition...

Com The RD line of Road Runner drags is PATENTED and Manufactured by Gayer Equipment, Inc. The RD1170 has a working width of 11'. New 2018 Road Runner RD1170 pull-type Road Drags in stock.

Working width of 8'. Category 2 and 3 and quick hitch compatible. New 2018 Road Runner Series RD830 3pt Hitch Road/Drive Drags IN STOCK. 5/8"x8" blades, or optional 3/4"x8". Curved or serrated blades optional.

2003 Wilson Pacesetter 41'x96"x66", Air-Ride, Ag Hoppers, Strap Doors, F/R Catwalks, Lo-Pro 24.5 Rubber 30%, Aluminum Wheels, 70% Brakes, Dump Valve. Straight Trailer

2011 Mcfarlane RD4030 30' Reel Disk, Vertical Tillage Tool, Straight Blades, Chopping Reel, 3Bar Spike Tooth Harrow, Single Rolling Basket, Single-Point Depth Control. Good Condition

2010 Mcfarlane RD4035 35' Reel Disk, Vertical Tillage Tool, Straight Blades, Chopping Reel, 3Bar Spike Tooth Harrow, Single Rolling Basket, Single-Point Depth Control. Good Condition

Com The RD line of Road Runner drags is PATENTED and Manufactured by Gayer Equipment, Inc. The RD970 has a working width of 9'. New 2018 Road Runner RD970 pull-type Road Drags in stock.

Working width of 7'. Category 2 and 3 and quick hitch compatible. New 2018 Road Runner Series RD730 3pt Hitch Road/Drive Drags IN STOCK. 5/8"x8" blades, or optional 3/4"x8". Curved or serrated blades optional.

2009 Stoughton 42'x96"x72", Air-Ride, Ag Hoppers, Commodity Doors, F/R Catwalks, Aluminum Subframe, 22.5 Rubber 30%, Aluminum Wheels, 80% Brakes, Like New Tarp, Two Rows of 5 LED Lights, Nice Straight Trailer.

Very good aluminum body! Good floor! Not a dump. 1969 Summit 30' Aluminum Trailer, 96" Wide, 64" Sides, Steel Frame, Spring Suspension, Tarp, Floor Valves, 11R22.5 Rubber 20%-80%, Good Brakes.

Working width of 5'. Category 1 and 2 and quick hitch compatible. New 2018 Road Runner Series RD630 3pt Hitch Road/Drive Drags IN STOCK. 5/8"x8" blades, or optional 3/4"x8". Curved or serrated blades optional.

Working widths of 5', 6', 7', and 8'. Fully adjustable tail-board (height, tilt, and angle). RD530, RD630, RD730 and RD830. 5/8"x8" blades, or optional 3/4"x8". Curved or serrated blades optional.

New 2018 Road Runner RD970 pull-type Road Drags now IN STOCK!!! 9' working width, 7 blades, fully adjustable tailboard, hydraulic depth control, adjustable axle, tongue cylinder, LED lights, 6 bolt hubs, high speed bearing, 3/4" blades, and MORE!!!

New 2018 Road Runner RD770 pull-type Road Drags now IN STOCK!!! 7' working width, 7 blades, fully adjustable tailboard, hydraulic depth control, adjustable axle, tongue cylinder, LED lights, 6 bolt hubs, high speed bearing, 3/4" blades, and MORE!!!

Working width of 5'. Category 1 and 2 and quick hitch compatible. New 2018 Road Runner Series RD530 3pt Hitch Road/Drive Drags IN STOCK. 5/8"x8" blades, or optional 3/4"x8". Curved or serrated blades optional.

2008 Lexion 570R Combine, 1157 Engine /862 Sep Hours, 4wd, CEBIS, Variable speed rotor drive, Quantimeter, Monitor, Auto-Pilot, Straw Chopper, auto contour, Front: 900X60R32, Rear: 28LXR26.

2009 John Deere 9770STS 4wd

Was running a few weeks ago. Has been stored inside. Bring battery and gas if you want to hear it run. We're not going to mess with it Tires are fair and all hold air. 1962 Chevrolet 60, 6cyl gas, 4+2 trans, 14' bed with hoist.

2012 John Deere 9460R 4wd, Scraper Special, 4050 hours, 18spd Powershift, Goodyear 710/70R42 (50%), Bareback, 4hyd Remotes, 75gpm Hyd Pump, Premium Cab, Electric Mirrors, 2-1450# Front Inner Weights, 2-1065# Dual Weights, Scraper and Ag Drawbar, Double...

483k Miles, Mack E7 380hp Engine, 10spd Transmission, Air-Ride Suspension, Twin Screw, 3rd Axle is Spring Up/Air Down, Grain Door, Cargo Doors, Shurloc Tarp, Aluminum Wheels, Excellent 22.5 Rubber, Good Brakes/Drums, Dual 140g Fuel Tanks, Rear Pintle...

NEW Fan Pulley. Good Mid-Rollers. 2003 John Deere 8320T, 5831 Hours, 30" Camoplast 3500 Tracks (80%), 4hyd Remotes w/ Return, 1000pto, 3pt w/ Quick Hitch, Auto-Trac Ready, 22 Front Weights (front belly weights optional), Field Office, Trimble GPS, ISO...

-This is an 8400 with "10" Series Decals. 1995 John Deere 8400, with John Deere H480 Loader, Self-Leveling, Quick Attach, 108" Bucket, Grapple Ready, 10,900hrs, Powershift, 4hyd Remotes, Quick Hitch, 480/80R46 Rears (95%), 16.9R30 Fronts (95%), Newer...

2009 Volvo VNM Day-Cab, 771k Miles, Volvo D13 435hp Engine, 10spd Transmission, 168"wb, Air-Ride Cab/Suspension, 12k Front Axle 40k Rear Axle, 3.58 Ratio, Engine Brake, 22.5" Rubber 40%, Aluminum Wheels.

New Clutch, New Brakes/Drums, New air-air Cooler, New DPF filter burn-out. 2008 Kenworth T660, Day-Cab, 518k Miles, 430hp Cat C-13 Engine, 10spd Trans, 180" Wheelbase, Air-Ride Cab/Suspension, Diamond-Tuck Interior, Carpet, Power Windows, Power Mirrors,...

2009 Case-IH Magnum 335, 1800 hours, MFWD, 480/80R50 Firestone Rears, 380/80R38 Firestone Fronts, 18spd Powershift, 4hyd Remotes, Big Hyd Pump, 3 PTO's, 10 Front Weights, Pair 450 Rear Weights, Front Fenders, HID Lights, 360* Lighting, Auto-Trac Ready.