It features easy programming, LED indicators, and choice of automatic or manual modes. This well-designed unit is a complete drop-in replacement control and circuit board for BouMatic-style detachers.
This print modules offer years of trouble-free operation at a competitive price. The Coburn Replacement Print Module for Surge 12-unit pulsation controller is even better than the original: Featuring a simple direct setting of 11 speeds and 11 ratios,...
Featuring green running indicators and red line fault indicators, this well-made controller is independently adjustable for front and rear pulsation with ratios from 50:50 to 75:25 and rates from 50 to 75 beats per minute.
12 Units Ratio from 50:50 to 70:30 16 Adjustable positions from 60 to 190 PPM Voltage input 120 The Kleen Flo S-12 pulsation controller for Surge has a 24 VDC output with a plastic enclosure.
This 24-unit pulsation controller from Interpuls is : Programmable, for rippling pulsation and a wide variety of speeds, ratios & milking conditions Features microprocessor & quartz timing Designed to minimize heat and stabilize output current to the...
Featuring green running indicators and red line fault indicators, this well-made controller is independently adjustable for front and rear pulsation with ratios from 50:50 to 75:25 and rates from 50 to 75 beats per minute.
Features include: Incremental Adjustment for 16 different ratio combinations from 70:30 to 50:50 Individually Adjustable for Front & Rear Multi-Adjustable for Speed. The Strangko Controller is simply the best-designed, best built, most accurate controller...
It is also fully short-circuit protected at 10 amps to run 12-stall barns with a healthy safety margin. The Coburn Replacement Print Module for Bou-Matic 12-unit pulsation controller is even better than the original: Featuring a simple direct setting...
The unit comes pre-loaded with default settings or individual parameters such as rate, ratio, phase and timing may be set using the touch screen. Box is totally protected against humidity.
Interpuls Transformer will fun up to 24 LP Electronic pulsators and features: Anodized aluminum frame Resin-sealed internal parts Short-circuit protected output channels Weight 13 lbs.
Featuring green running indicators and red line fault indicators, this well-made controller is independently adjustable for front and rear pulsation with ratios from 50:50 to 75:25 and rates from 50 to 75 beats per minute.
It features: Anodized aluminum frame Resin-sealed internal parts Short-circuit protected output channels Weight 10 lbs. Transformer will run up to 36 LP Electronic Interpuls Pulsators or 26 ACR Parlor Detachers.
If the rate is approved by you we will charge you the additional shipping. After you place your order we will arrange for you to pick up your order. This item does NOT ship for free Shipping charges will apply to this item.
Standard Equipment Heavy duty manual headgate Flex cutting gate or dropgate Palpation cage with latches following squeeze Side exit, right side Side entrance, left side Six removable branding doors Double side squeeze 73" inside working height 124" inside...
Please choose stationary or portable: Stationary, Portable
Standard Equipment Heavy-duty manual headgate Flex cutting gate or drop gate (Choose from options below) Humping bar Palpation cage Side exit Six branding windows Removable bottom side panels Adjustable squeeze 10-gauge diamond plate floor Optional Equipment...
Please choose stationary or portable: Stationary, Portable
Please choose Drop Gate or Bolt-On Flex Gate: Drop Gate, Bolt-On Flex Gate
If the rate is approved by you we will charge you the additional shipping. Pick up available This item is available for customer pick FOB Clarion, Iowa . Cattlemaster 640 Chute w/ Ratchets on Both Sides.
Weight: 795 lbs
Please choose Drop Gate or Bolt-On Flex Gate: Drop Gate, Bolt-On Flex Gate
Rated at 115/230V, 12.5 amps, it is suitable for a string of six VS12 Barn Kooler fans or six VS20 or VS24 Barn Kooler fans, or similar fans. Manual Variable Speed Fan Control is moisture proof.
Two year limited warranty. Control will handle one or two VBS24 fans. Temperature probe. Automatic Temperature Adjustable Variable Speed Control may be set for variable speed and for temperature range from 32 to 113°F.
UL listed and CSA certified. Thermostat has large stainless steel coiled sensor for quick response to temperature changes and may be used with one or two VBS24 or VBS36A fans. Single Stage Moisture Proof Thermostat has large visible dial to set temperature...
A light spray of water combines with fan action for a gentle, cooling mist. 6-nozzle kit is suitable for Barn Kooler Fans with 36" blades or similar size fans. Each nozzle delivers 1/2 gallon at low end of the 50-300 psi pressure range, yielding cooling...
Two year limited warranty. Control will handle one or two VBS24 fans and has a 15 amp overload protection fuse. Manual Variable Speed Control has on-off switch and manual variable output knob.
