Agiseek home

Used Equipment Ecus Electronic Control Modules For Sale In Valley City

Become a Partner
ITP LP30 Programmable Pulsator w/2 Exits
Prices start at : 313.30 USD / each

The water-resistant case features lean attractive design and the quick-connect electrical connections are water-proof. 10 minutes *Use with a transformer, no controller necessary *Diaphragm-driven valves for quiet, smooth operation *Waterproof quick-connects...
  • Weight: 1 lbs
North Dakota
Valley City
Repl. Print Module f/ Surge 32-Unit Controller
Prices start at : 404.90 USD / each

This print modules offer years of trouble-free operation at a competitive price. 18 Month Limited Warranty. The Coburn Replacement Print Module for Surge 32-unit pulsation controller is even better than the original: Featuring a simple direct setting...
  • Weight: 3 lbs
North Dakota
Valley City
48V Transformer f/ BM 12-Unit Controller
Prices start at : 147.48 USD / each

48 Volt, 10 Amp Center Tap Transformer for Bou-Matic 12-unit controller with 120V or 240V primaries.
  • Weight: 2 lbs
North Dakota
Valley City
Board Complete f/ B/M B2000 Detacher
Prices start at : 284.76 USD / each

It features easy programming, LED indicators, and choice of automatic or manual modes. This well-designed unit is a complete drop-in replacement control and circuit board for BouMatic-style detachers.
  • Weight: 1 lbs
North Dakota
Valley City
Replacement Print Mod f/Surge 12-Unit Controller
Prices start at : 301.07 USD / each

This print modules offer years of trouble-free operation at a competitive price. 18 Month Limited Warranty. The Coburn Replacement Print Module for Surge 12-unit pulsation controller is even better than the original: Featuring a simple direct setting...
  • Weight: 1.2 lbs
North Dakota
Valley City
Coburn 16-Unit Controller
Prices start at : 806.70 USD / each

18-Month Warranty. Featuring green running indicators and red line fault indicators, this well-made controller is independently adjustable for front and rear pulsation with ratios from 50:50 to 75:25 and rates from 50 to 75 beats per minute.
  • Weight: 25 lbs
North Dakota
Valley City
Kleen Flo S-12 Pulsation Controller for Surge
Prices start at : 545.26 USD / each

12 Units Ratio from 50:50 to 70:30 16 Adjustable positions from 60 to 190 PPM Voltage input 120 The Kleen Flo S-12 pulsation controller for Surge has a 24 VDC output with a plastic enclosure.
  • Weight: 16 lbs
North Dakota
Valley City
Controller f/ 24 LE Pulsators
Prices start at : 1012.51 USD / each

This 24-unit pulsation controller from Interpuls is : Programmable, for rippling pulsation and a wide variety of speeds, ratios & milking conditions Features microprocessor & quartz timing Designed to minimize heat and stabilize output current to the...
  • Weight: 10 lbs
North Dakota
Valley City
Repl. Board f/ PCSB16 16-Unit Controller
Prices start at : 302.59 USD / each

Replacement Print Module for PCSB16 controller.
  • Weight: 2 lbs
North Dakota
Valley City
12V 6-Unit Controller
Prices start at : 454.41 USD / each

Featuring green running indicators and red line fault indicators, this well-made controller is independently adjustable for front and rear pulsation with ratios from 50:50 to 75:25 and rates from 50 to 75 beats per minute.
  • Weight: 2.5 lbs
North Dakota
Valley City
Print Module f/ 12V Pulsation Controller
Prices start at : 280.41 USD / each

Replacement print module for 10067.
  • Weight: 5 lbs
North Dakota
Valley City
CSA Approved 24-Unit 120V Strangko Controller
Prices start at : 2642.24 USD / each

Features include: Incremental Adjustment for 16 different ratio combinations from 70:30 to 50:50 Individually Adjustable for Front & Rear Multi-Adjustable for Speed. The Strangko Controller is simply the best-designed, best built, most accurate controller...
  • Weight: 21 lbs
North Dakota
Valley City
Repl. Print Module f/ Bou-Matic 12-Unit Controller
Prices start at : 275.87 USD / each

18 Month Limited Warranty. It is also fully short-circuit protected at 10 amps to run 12-stall barns with a healthy safety margin. The Coburn Replacement Print Module for Bou-Matic 12-unit pulsation controller is even better than the original: Featuring...
  • Weight: 2 lbs
North Dakota
Valley City
Controller w/Touchscreen f/24 LE Pulsators
Prices start at : 959.08 USD / each

In addition to the convenient touch-screen feature, this Pulsation Controller has an appealing compact design and, at 6 lbs., is much lighter weight than other 24-unit controllers.
  • Weight: 6 lbs
North Dakota
Valley City
Transformer f/ 24 LP Pulsators
Prices start at : 682.11 USD / each

Interpuls Transformer will fun up to 24 LP Electronic pulsators and features: Anodized aluminum frame Resin-sealed internal parts Short-circuit protected output channels Weight 13 lbs.
  • Weight: 13 lbs
North Dakota
Valley City
12-Unit Controller f/ Surge-Style Installations
Prices start at : 807.00 USD / each

18-Month Warranty. Featuring green running indicators and red line fault indicators, this well-made controller is independently adjustable for front and rear pulsation with ratios from 50:50 to 75:25 and rates from 50 to 75 beats per minute.
  • Weight: 25 lbs
North Dakota
Valley City
Power Supply for 26 ACRs or 36 Pulsators
Prices start at : 744.09 USD / each

It features: Anodized aluminum frame Resin-sealed internal parts Short-circuit protected output channels Weight 10 lbs. Transformer will run up to 36 LP Electronic Interpuls Pulsators or 26 ACR Parlor Detachers.
  • Weight: 10 lbs
North Dakota
Valley City
Cattlemaster 440 w/ Rear Tabs
Prices start at : 2499.00 USD / each

Pick up available This item is available for customer pick FOB Clarion, Iowa . If you do not wish to place your order now you can click "ask a question about this products". Please enter your zip code and we will respond with a quote.
  • Weight: 150 lbs
North Dakota
Valley City
Cattlemaster 1100M Chute
Prices start at : 8732.00 USD / each

If the rate is NOT approved by you then we will cancel your order. No moving parts attached to the floor. After you place your order we will arrange for you to pick up your order. If the rate is approved by you we will charge you the additional shipping.
  • Please choose stationary or portable: Stationary, Portable
  • Weight: 1325 lbs
North Dakota
Valley City
Cattlemaster 900 Squeeze Chute
Prices start at : 6076.00 USD / each

Standard Equipment Heavy-duty manual headgate Flex cutting gate or drop gate (Choose from options below) Humping bar Palpation cage Side exit Six branding windows Removable bottom side panels Adjustable squeeze 10-gauge diamond plate floor Optional Equipment...
  • Please choose Drop Gate or Bolt-On Flex Gate: Drop Gate, Bolt-On Flex Gate
  • Please choose stationary or portable: Stationary, Portable
North Dakota
Valley City
Cattlemaster 640 Sorting & Holding Chute
Prices start at : 4566.00 USD / each

If the rate is approved by you we will charge you the additional shipping. Cattlemaster sorting and holding chute. This Cattlemaster Chute can also be purchased as a portable chute.
  • Please choose stationary or portable: Stationary, Portable
  • Weight: 795 lbs
North Dakota
Valley City
Manual Speed Control
Prices start at : 260.64 USD / each

Rated at 115/230V, 12.5 amps, it is suitable for a string of six VS12 Barn Kooler fans or six VS20 or VS24 Barn Kooler fans, or similar fans. Manual Variable Speed Fan Control is moisture proof.
  • Weight: 2 lbs
North Dakota
Valley City
Temperature Adjusting Variable Output Control
Prices start at : 452.40 USD / each

Two year limited warranty. Temperature probe. 115/230V, 50/60 hz, 12 FLA amps, single stage. Control will handle one or two VBS24 fans. Rugged, sealed case measures 6” x 6” x 3.75” and includes 1 ft.
  • Weight: 2.5 lbs
North Dakota
Valley City
Single Stage Thermostat Control--120/240/277V, 50/60Hz
Prices start at : 73.24 USD / each

UL listed and CSA certified. Thermostat has large stainless steel coiled sensor for quick response to temperature changes and may be used with one or two VBS24 or VBS36A fans. 115/230/277V, 50/60 hz, 16/12/10 amps.
  • Weight: 0.7 lbs
North Dakota
Valley City
Mist Kit w/ 6 Nozzles f/ VS36 Fans
Prices start at : 135.13 USD / each

6-nozzle kit is suitable for Barn Kooler Fans with 36" blades or similar size fans. For more effective cooling in open air shade structures, install Mist Kits. A light spray of water combines with fan action for a gentle, cooling mist.
  • Weight: 2 lbs
North Dakota
Valley City
Wall Mount Bracket f/12\
Prices start at : 31.75 USD / each

Wall Mounting Bracket for 12", 20" or 24" Barn Kooler Fans model VS12, VS20 and VS24.
  • Weight: 5 lbs
North Dakota
Valley City
Wall Mount Bracket f/30\
Prices start at : 53.17 USD / each

Wall Mounting Bracket for 36" Barn Kooler Fans.
  • Weight: 5 lbs
North Dakota
Valley City