Used Equipment Drills And Caddies For Sale In Fairless Hills

Working width: 22' 5"-24' 5".

Highline RCH Ditch Bank Mower 15'

Kuhn GA 7302DL Twin Gyrorake Side Delivery, 2pt Semi Mount, Cat II or III, Self Steering Rear Wheels, Working Width 23'-24'

Working width: 22' 5"-24' 5".

Opticut silage baler 14 knives, 4 x 6 bales, VT50 monitor, 14,000 bales.

20' stock chopper.

10" x 1/4" wall DOM flail tube. Rubber shielding. 2-3/16" Drive Shaft Bearing. Dual, Gauge wheels. Lower clean out hinged door. Center drive shredder, right hand windrow discharge, pull type, 1.25" PTO.

$7,500 Discount Available - bale wrapper round or square

Ditch bank mower. 3pt CAT II hitch, 7; working width, 540, min PTO HP 65, max PTO HP 90, 24 knives, HYD Side shift.

Output and pressure required: Standard 11-16 gpm at 6,000 psi. Required tractor hydraulic connections: 1 SA with 3/4" free return. 2 swivel headstock, twin roller arms, Hydraulically shift wrapper for proper alignment with bale, Ability to wrap round...

.$3,500 Discount Available

Twin Gyro Rake, 2 pt Semi Mounted, 2 Rotors, 11 Arms per Rotor, 4 Tines per Arm, Working Width 22.5" to 24.5", Clean Swept Width 21'10" to 23'9",PTO-S.WWE2280 13/8-6 F5/1R 910, Rear Steering, Wheel Set 10/75-15.3, Lights and Signaling, Hyd Adj of Working...

2 pickups & conveyors. Min flow: 1000 RPM. Spring header flotation. 2/3/3N or drawbar hitch type. Minimum Hydraulic Parts Required: 10 GPM at 1650 PSI. 14" header suspension travel.

Belco Econo Wrap EW-450S Bale Wrapper, 3 Pt Hitch, Stationary Wrapper

Up to 4 bales a minute. In line bale wrapper. Steer from tractor. Hand held remote with 200' range. Does round bales up to 6'6" and square bales up to 5'6". Has Honda GX 630 electric start, 20 hp motor.

8 wheel, 3 pt rake.

GA 3200 GT GYRORAKE, 9 Arms, 3 Tires Per Arm, Working Width 10'6", Clean Swept 7'3", 540 PTO, 20 hpmin

12 Wheel Rake, Working Width 18'9" to 23'4", Includes Optional 55" Kicker

VB 3195 Opticut Round Baler, Pivoting Pickup Wheels, Bale Kicker,

4 rotors, 7 tine arms per rotor, working width 17' 1", PTO required 20 hp minimum, 1 DA hydraulic connection .

14 Wheel Rake, Tandem Axles, Working Width up to 28'

$6,000 Discount Available - Opticut 23, high silage, 3D wrapping unit w/ pivoting pre stretchers.

Working width is 8'6", 2 rotors, 7 tine arms per rotor, drawbar, 540 PTO speed, transport width is 9'10", transport height is 9'2", 1,170 lbs, Tractor hydraulic equipment: 1 DA, requires 20 hp tractor power.