Used Equipment Construction Parts For Sale In Buffalo

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Interior Panels, Covers, Vents: There are a few panels with this cab shell. Cab Overall Condition Rating (1-10, 1= Worst, 10=Best): 7 Weight for Shipping: 2,000 lbs. Other (Tag Info, etc.): The certification tag is attached in the upper RH, rear corner...

Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Description: All of the pin holes on this boom appear to be in decent shape. No cracks or repairs have been found.. Weight: 6,200 lbs.

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long Weight:5,000 lbs. The machine this boom was on had burned and the base of the boom has taken a little heat from the fire.

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long Weight:5,000 lbs. On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos).

Dimensions for shipping: 1 1/2 feet High, 3 1/2 feet Wide, 14 feet Long Dimensions are of the stick laying on its side. Weight: 2100 lbs. The bushing for the pin hole where the bucket pins to the stick looks like it may have some wear.

Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long Weight: 1,100 lbs. All of the pin holes appear to be in good shape and no cracks or repairs have been found. Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters.

Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long Description: All of the pin holes and all of the pin boss surfaces look good on this boom. No cracks have been found.

Stick Information

CONTROL LINKAGE HAS SOME WEAR. VINYL SEAT HAS A FEW TEARS IN IT. HAS A/C WHICH IS NOT WORKING. ALL WIPER ARMS MISSING. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION.

Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long Weight: 1,500 lbs. All of the pin holes appear to be in good shape and no cracks or repairs have been found. Description: The working length of this stick is 9 feet, 7 1/2 inches long...

Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long Weight: 2500 lbs. All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear.

All of the other pin holes appear to be in good shape. The condition of the tilt cylinder is not known. The 2 cutting edges (p/n: 4T2315) need to be turned or replaced. Long Angling Frame Dimensions: 4 ft.

Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Weight: 1,800 lbs. Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found.

GEARAMATIC WITH DRIVE SHAFTS.

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Weight: 1,500 lbs. Description: All of the pin holes on this boom are in good shape and no cracks have been found.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long Description: All of the pin holes on this boom appear to be in good shape. No cracks or repairs have been found.

This stick has a mount welded to the bottom of it. All of the pin holes appear to be in good shape. (Outer bushing part number: 61EN-13320). Weight: 2,200 lbs. The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters.

Mid-section to jib section cylinder-The working condition of this cylinder is also unknown, although the rod is rusted as can be seen in the photos. Boom to mid-section cylinder-The working condition of this cylinder is unknown.

NOT INSTALLED ... RECEIVED CAB GLASS NEW...

Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long Weight: 1,600 lbs. All of the pinholes appear to be in decent condition. There two cracks on this stick (see photos) near where the stick cylinder pins to it.

6.6 METER Weight: 9,000 lbs. Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long

Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long Weight: 3,000 lbs. All of the pin holes look good and no cracks have been found. Description: The working length of this stick is 11 feet, 4 inches.

Dimensions for shipping: 5 feet High, 3 feet Wide, 21 feet Long Weight: 4,500 lbs. Description: All of the pin holes appear to be in good shape and no cracks have been found.