Used Equipment Construction Equipment For Sale In Santa Ana

Hammer bracket welded on. Complete as pictured. 10-6" long, 80-90mm bucket pins. CAT 330B Stick with bucket cylinder and "D" Linkage.

Cat 'OR' rebuilt lift cylinder OR1843, not used in years, will probably need reseal of dry seals.

Will probably need reseal. Rebuilt in 8-97 but not used since.

Felco Bedding Conveyor, 24" belt, 26' conveyor, 6 yd hopper, set up to fit CAT 245 but will fit other excavators with some modifications.

Excellent reach boom assy from 2006 and later CAT 330D L, complete as pictures with stick cylinder.

2 available, one rebuilt, one take-off only.

Been sitting idle. May need re-seal due to dried out rubber. Running take-off, stick cylinder.

Running, Take-off stick cylinder but has been sitting so will need re-seal of old rubber.

Good low hour take-out Deutz 4-cyl diesel engine, F4L912, running condition

Left side Saf-T-Cab slope board w/ 2' extension, ball mount cylinder type. No hydraulic cylinder and no dozer mount brackets included.

Mechanical grapple/crusher with stiff arm. Originally on CAT 235 or 245 but has been bushed to "C" family linkage.

CAT 330D Stick with DB Linkage and bucket cylinder

Good running and well taken care of.

Take-off Saf-T-cab slopeboard with 2' extension. Xlint condition.

Rebuilt bucket cylinder

Rebuilt 988F bucket tilt cylinder, Jan 04 rebuild so may need reseal of dried out seals.

Running take-off hoist cylinder.

Saf-T-Cab slope board to fit left side D9 dozer arm. Comes with 2' extension but no ball mounted hydraulic cylinder nor and dozer weld-on brackets included.

CAT 963B Pin-on GP bucket with CGS

Three available. Make offer on one or all. May need to be re-seal as they have been sitting. Used, running, take-off sliding floor cylinders.

Running take-off hoist (bed) cylinder. Probably will need re-seal due to dried out rubber.

Long stick, 15' with pins

.2014 ZB20044 Standard features: • Pilot- operated joystick boom and frame level controls • 4 wheel power steering • Gauge instrumentation • Hydraulic frame leveling • Automatic self-leveling forks • Engine block heater • Quick disconnect carriage...

RENT READY 5.5YD WHEEL LOADER, ROPSTYPE: ENCLOSED

5 TO 6 YARD WHEEL LOADERS, READY TO GO. CAB, AC, ROPSTYPE: ENCLOSED

WORK READY DOZER W/ TILT AND W/ RIPPER, CAB, AC, ENGINE SIDE DOORS, 3900HRS ON REBUILT ENG, 75% + TRACKS, NEW PAINT AND RUNS AS GOOD AS IT LOOKS! GREAT CONDITION FULLY SERVICED FORMER RENTAL UNIT, AIRCONDITIONING: YES, RIPPER: YES, WINCH: NO, RIPPERTYPE:...

WORK READY 5.5YD WHEEL LOADER, COME AND GET IT!, ROPSTYPE: ENCLOSED