Used Equipment Construction Equipment For Sale In Lowell

MEASURES 13 7/8" BETWEEN THE EARS, 19" CTR - CTR, AND 80MM FRONT & REAR PINS. 32" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 3 FLARED TEETH & 2 STRAIGHT TEETH [1073550], 3 BOLT CAT-STYLE SIDE CUTTERS, CLEVIS EYE ON BACK AND DEAD PINS.

OPENED AND INSPECTED. GOOD WORKING TAKE OFF.

DOES NOT INCLUDE DEAD PINS. 38" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 5 FLARE TEETH [1U3302], SIDE CUTTERS, AND A HOOK ON BACK. MEASUREMENTS ARE 10 3/4" BETWEEN THE EARS, 17" CTR - CTR, AND 70MM FRONT & REAR PINS.

2,600 gallon water tank(seperate)Makita gasoline motor, with pump 3" 265 gallons per minute, 700 gallons of fuel. Dozens of other beds for sale that will make you money.Made by Central Machine Works ,Austin ,Texas

HOME MADE HYDRAULIC THUMB. 45" GP BUCKET WITH 9'9" STICK. CALL FOR MORE INFORMATION AND PRICING.

REMAN HYDRAULIC PUMP $18,450.00 NEW

WE WILL DO FINAL INSPECTION BEFORE DELIVERY REBUILT BY MCCALLISTER MACHINERY WASHINGTON, IN. GOOD RUNNING TAKE OUT. ENGINE ARRANGEMENT# 4N7671 ENGINE IS OUT OF A CAT 637D S/N: 23W0638 MOTOR SCRAPER.

12" BETWEEN THE EARS, 17" CTR - CTR, 80MM FRONT & REAR PINS. 24" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 4 STRAIGHT TEETH [X290], 5 BOLT SIDE CUTTERS, OVAL CLEVIS EYE ON BACK, AND DEAD PINS.

Flatbed with 2) 500 gallon steel tanks.

48" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 6 TEETH [8J3352].

HOME MADE HYDRAULIC THUMB. 9'9" STICK WITH 45" GP BUCKET. CALL FOR MORE INFORMATION AND PRICING.

ROOD RUNNING TAKE OUT OF A CAT 637D S/N: 23W0638 CALL FOR MORE INFORMATION AND PRICING.(219) 696-8911

Like New !! Used 1 time !! 72" Wide Blade

This is an absolute animal for cutting grass, but much more versatile than a zero - turn. 2005 New Holland TC35DA tractor with front end loader and 84" belly mower - 35 HP 3 cylinder DIESEL motor - 510 hours - 4WD - fully Hydrostatic transmission, very...

CAB, HEAT, AC, MECHANICAL CONTROLS, HYD.

.76 CUBIC YARD CAPACITY. 40" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 5 TEETH [E161-], DEAD PINS, AND 4 HOLES FOR SIDE CUTTERS. 10" BETWEEN THE EARS, 15 1/4" CTR - CTR, 65MM FRONT PIN, 65MM REAR PIN.

NEW CAT TAKEOFF RUBBER TRACKS (SET OF 2)

WB, alum outers Detroit Series 60, eng brake, Eaton Fuller 10 spd, A/R cab, 3 line Wet kit, A/R susp, 12000 lb frt, 4 lb rears, 233 in.

$10 to $100 per tire. $400 minimum order. Lots of wonderful used tires, not good for high speed highway driving. Farming and logging off road. Also 9x 22.5. 1200s . So many tire sizes.

29 foot rear deck over tandem. 36" king pin setting. One owner since 2008. 65 foot totally stretched. 11 foot pull out deck . Peter Kiewit and sons owned.

GVW 48,200LBS , 40,000lbs TDT capacity . SPRING SUSPENSION, PINTLE HITC , 24 FT TILT DECK.

Model: 200 BARRELL

14 cubic yards water level. 20' PULL TYPE - ONLY ONE ON THE LOT!!! USED, In near perfect condition. Very low hours. Self Contained Hydraulics, Tandem Motors On Gear Box, 1000 RPM PTO, Bar Type Chain Conveyor - 33 1/2" Wide Pintle Chain, Conveyor Drive...

Two way tailgate. AIR RIDE SUSPENSION, TAILGATE ..Nice liner.