They can be mounted on various carriers i.e. Ag Tractor, Excavator, Vibratory Roller, Motor Grader etc. The Stehr SBV range of Plate Compactors is a versatile tool able to cope with difficult ground conditions yet provide consistent results.
If standard axles are used the the MM is able to crush brittle materials such as coal, bricks etc. ROBI offers a full range for excavators from 10-45 tonne and wheel loaders from 6-19 tonne.
HKL frames are developed for mounting onto loaders and excavators. HKL Mini is delivered with an electronic valve as standard. The frames for loaders with a telescopic arm work to the left for better view over the work area.
FSI Stump Cutter ST 20 HS is driven by a high performance piston motor with V-belt operation between the engine and cutting. Simple operation of the FSI Stump grinder on the loader joystick.
The SGF 1300 has a cutting depth of 1.300mm and a max width of 350mm. Rigorous testing has proven these machines in difficult terrain The SGF 800 has a cutting depth of 800mm and a cutting width of 250mm.
The FSI Stump Cutter ST 65 H is hydraulically driven by robust piston engines and power-Belt V-belts and is specially designed for mounting on excavators.The specially balanced Hardox milling disc (720 mm O) is provided with 28 triplex cutting teeth,...
A belt drive transmission between the hydraulic piston motor shaft and the cutter wheel shaft will ensure the combination of both flexibility and stability . It is designed mostly for small front loaders but also for mini excavators.The horizontal sweeping...
The DG is made of high quality wear resistant materials with easy changed wear parts to reduce downtime. Available for excavators from 3-40 tonne. It has the capacity to handle light demolition tasks when dealing with structures made of wood or brick.
A belt drive transmission between the hydraulic piston motor shaft and the cutter wheel shaft will ensure the combination of both flexibility and stability . It is designed mostly for small front loaders but also for mini excavators.The horizontal sweeping...
The FSI ST 27 T stump cutter is a 3 points linkage machine designed for micro or compact tractors and PTO driven.The horizontal sweeping is performed by 2 hydraulic rams which move at equal speed in each of the right or left directions.
As a matter of course, we haven't let the grease nipple protection and powder coating go missing either! various sizes from 1200 mm 1900 mm 4-finger grippers for hackers made from Hardox 400 jagged models specifically for jerking compatible...
The FSI ST 27 Hstump cutter unit can rotate and be positionned in any of the 6 different notches in order to provide the best possible working conditions for the operator, without having to dismount it from the base machine .
HKL frames are developed for mounting onto loaders and excavators. HKL Mini is delivered with an electronic valve as standard. The frames for loaders with a telescopic arm work to the left for better view over the work area.
The FSI ST 65 T stump cutter has a hydraulic flow regulator which allows the speed control of the movements to cope with the specific conditions of the jobs. The FSI ST 65 T stump cutter has our largest cutter wheel with a diameter of 720 mm,this gives...
HKL frames are developed for mounting onto loaders and excavators. HKL Mini is delivered with an electronic valve as standard. The frames for loaders with a telescopic arm work to the left for better view over the work area.
In order to help the operator in different job situations and awkward cases were access is difficult ,the FSI ST 20 H stump cutter unit can rotate and be positionned in any of the 4 different notches without having to dismount it from the excavators...
There are approximately 30 various models with 1-12 drive motors according to the hydraulic power on the carrier machine. 30 different models to fit every machine and circumstance the strongest available cone splitter has 12 engines and is in application...
The FSI Stump Cutter ST 65 H is hydraulically driven by robust piston engines and power-Belt V-belts and is specially designed for mounting on excavators.The specially balanced Hardox milling disc (720 mm O) is provided with 28 triplex cutting teeth,...
The large Hardox cutting wheel (570 mm diameter) with 20 triplex cutting teeth ensures a milling performance that meet professional standards. FSI ST 50 HS stump cutter is supplied with mounting hardware for a quick install.
Cutting disc w/teeth: o 470 mm No. of teeth (o size): 18 (20.5 mm) Machine size: Height. 600 mm, Length*width: 800*650 mm Weight: 125kg Excavator size: 3 7 ton Power required: 20-35 HP 15-25 KW Oil flow (max 250 bar): 40-60 L/min Hoses*quick couplers:...
HKL frames are developed for mounting onto loaders and excavators. HKL Mini is delivered with an electronic valve as standard. The frames for loaders with a telescopic arm work to the left for better view over the work area.
V-belt drive between the hydraulic piston motor and the cutter wheel. Easy adaptation for your machine - the stump cutter is delivered together with brackets to fit on a standard supporting plate.
The FSI Stump Cutter ST 65 H is hydraulically driven by robust piston engines and power-Belt V-belts and is specially designed for mounting on excavators.The specially balanced Hardox milling disc (720 mm O) is provided with 28 triplex cutting teeth,...
Lasco Hydraulic Log Splitter Approx. Since 2007 with gears and heavily optimized cone shape. There are approximately 30 various models with 1-12 drive motors according to the hydraulic power on the carrier machine.
