Used Equipment Backhoe And Excavator Attachments For Sale In San Antonio

Tree Capacity, Four Double-Edge Blades

8 lug, Fits all skid steers, 40 to 50 % Set of 4 used 10" X 16.5" solid cushion tires/wheels.

Used 28” John Deere hyd main pin thumb, 80mm main pins, 28" wide tines, 57" from end of tines to center of main pin, 19 5/8" clear between pin bosses, With hydraulic cylinder, Weights 1000lbs

Unused! Bobcat 6 -.

Used solid tires,

Model # MD4 500lb class, Weight with skid steer mount: 740lbs Tool Diameter: 2.34 With hoses and flat face couplers.

Very good condition 2017 DITCH WITCH SK5PF mini Skid Steer Forks Hydraulic fork positioning, Fits mini skid steers, Ditch witch, Vermeer, Toro, 3” X 1.5” think X 48” long tines.

Industry leading blade adjustment design, Weights 1,400lbs Dual cylinder with 48” brush guard, 14.5” between arms when closed, 20” between tip of blades when open, Cuts flush to the ground, 5½” hydraulic cylinders with 3” Black Nitro Rods 3¼”...

Digs 11’ deep.

From Stock # 1724 2015 Vermeer RC6000 Reel Carrier Fits to model: T555, T655, and more Very good condition, Does not have reel rod.

Very good condition, From stock #1820 2009 Vermeer RCS1250 Reel Carrier Fits to model: RTX1250, RTX950, RT1250, RT950, V120, V8550 and more.

2016 Bobcat 73" Vibratory smooth roller.

Swing boom model, 30” blade, High flow, Requires Bobcat 7 pin electrical harness, With chemical tank and pump, (this does require separate 12v power), Weights 1,100lbs

Cuts flush to the ground, Built-in 10 gallon chemical spray tank (pump is not included) 5” cylinders, 4? Chrome plated, spiral cut hinge pins, 1” blades, Industry leading blade adjustment design Weights 1875lbs

TILLER ASSEMBLY FOR

24” wide blade,

Length: 41 inches

New Unused Bobcat 8 Lug Wheels for 14 X 17.5 tires.

Used wheel loader fork attachment, With Volvo quick coupler mount, 8’ wide carriage, 54”Long X 2.5” thick fork tines, Fits, L50 thru L120 Volvo loaders

Used 30” Tag main pin thumb, 80mm main pin size, 30” wide tines, 63" from center of main pin to end of thumb, 21 3/8" open between pin bosses, With hydraulic cylinder, Weights 1,200lbs, Fits Kobelco 210 and other machines

Bobcat planer/mill

Used 30” Tag hyd main pin thumb, 80mm main pin, 30" wide tines, 64" center of pin to end of tines, 20 1/2" clear between pin bosses, With hydraulic cylinder, Weights 1250 lbs

2400lbs, 150 gallon poly tank, Mounts on front of Vermeer V8050, V8550, V120, RT950, RT1250, RTX1250

Used Tag hyd main pin thumb, 65mm main pin, 24" wide tines, 53 1/2" from end of tines to center of main pin, 17 7/8" clear between pin bosses, With hydraulic cylinder, Weights 675lbs