Used Equipment Backhoe And Excavator Attachments For Sale In Buffalo

6.3 yard bucket 77" wide fits 385c cat

80 mm pins appears to fit 200 John Deere

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Cab Information: Cab Manufacturer: Volvo Type of Cab: EROPS Cab If EROPS Cab, is Certification Tag present?: Yes Is Cab Equipped with/for AC?: Yes Condition of: Cab Shell: The cab shell is in very good condition overall.

Description: All of the pin holes on this boom appear to be in decent shape. No cracks or repairs have been found.. Weight: 6,200 lbs. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long All of the pin holes on this boom are in good condition and no cracks have been found. No warping appears to be present.

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long Description: All of the pin holes on this stick are in good condtition. The rest of the boom looks good.

Dimensions for shipping: 1 1/2 feet High, 3 1/2 feet Wide, 14 feet Long Dimensions are of the stick laying on its side. Description: The working length of this stick is 10 feet, 3 inches or 3.1 Meters.

Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters. This stick has a thumb mount welded to the bottom of it.

Description: All of the pin holes and all of the pin boss surfaces look good on this boom. No cracks have been found. Weight: 3,800 lbs. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long

Stick Information

CONTROL LINKAGE HAS SOME WEAR. HAS A/C WHICH IS NOT WORKING. ALL WIPER ARMS MISSING. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. VINYL SEAT HAS A FEW TEARS IN IT.

Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters. This stick has a thumb mount welded to it.

Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long Description: The pin holes for the bellcrank pin, have a little wear and the boss surfaces around the holes having some "scoring" in them.

Cracks/Damage: There is a crack in the blade face, just off to the left from the center of it. Some of the vertical bars on the debris guard are bent and some are missing. Condition of Cutting Edges/Corner Bits: Both corner bits (p/n's: 8E9378 & 8E9379)...

Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Weight: 1,800 lbs. Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found.

GEARAMATIC WITH DRIVE SHAFTS.

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Weight: 1,500 lbs. Description: All of the pin holes on this boom are in good shape and no cracks have been found.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Description: All of the pin holes on this boom appear to be in good shape. No cracks or repairs have been found. Weight: 2,000 lbs. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long

Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long. All of the pin holes appear to be in good shape. (Outer bushing part number: 61EN-13320). Weight: 2,200 lbs. This stick has a mount welded to the bottom of it.

All of the pin holes appear to be in good shape and no cracks can be seen. All of the pin holes also appear to be in good shape and no cracks can be seen. Boom to mid-section cylinder-The working condition of this cylinder is unknown.

NOT INSTALLED ... RECEIVED CAB GLASS NEW...

Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long Description: The working length of this stick is 9 feet, 7 1/2 inches. All of the pinholes appear to be in decent condition.

Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long 6.6 METER Weight: 9,000 lbs.

Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long Description: The working length of this stick is 11 feet, 4 inches. This stick has had a thumb mount cutt off it and because of this ,it has a few light torch marks burned into it.