The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment. Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never go back to a traditional action sleeve.
Specs
Overall width 2.8": Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
The snap allows the user to keep the saw attached during use, even at arm's length. Half twist helps keep equipment hanging straight! 1-inch wide nylon webbing, ends heat-sealed to prevent fraying.
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Adjustable from 3 to 6 feet. A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope. 5,000 tensile strength.
Two top-quality 22SL safety snaps and thimble for freedom of movement. Easy and safe lock-in or out! Adjustable 6 foot lanyard of 1/2 inch loose-lay filament nylon rope. 5,000 lbs test.
This makes the flipline completely adjustable. Fliplines utilizing steel cores provide additional protection from accidental contact with chainsaws! Fliplines are made of 1/4 inch galvanized cable wrapped with a 12 strand polyester braided cover.
Do so by tightening the tension bolt until both halves securely join. Improves the accuracy of your Big Shot Launcher! SherrillTree designed the Notch Big Shot Trigger for use with their Big Shot Launchers .
Product Features
Specs
Product Benefits
Use with your Notch Big Shot Launcher: Product Features
Reduces arm fatigue: Product Benefits
Integrated safety latch: Product Features
Diameter (inches): 1-1/4: Specs
Color: Black/Metallic: Specs
Improves launch accuracy and consistency: Product Benefits
Two safety snaps on either end for easy lock-in or out! A tough, flexible safety strap made of Nybuck - A filament nylon woven into neoprene-impregnated cloth. 5'8" length, 5,000 lb test.
Climbing line diameter must be equal or greater than the Blue Streak (12mm). Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when an added wrap or other proper hitch is used.
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
The rope is lightweight, flexible, abrasion-resistant nylon and includes a protective sleeve for reduced contact to abrasive surfaces. A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing...
Product Features
Length: Grillon with 9-foot rope lanyard
Available in a 9ft. or 15ft. lanyard: Specs
The rope is lightweight, flexible, abrasion resistant nylon and includes a protective sleeve for reduced contact to abrasive surfaces: Product Features
Ship wt: 2 lbs.
Connects to the side or waist attachment points of a harness with carabiners (sold separately): Product Features
A height adjustable elastic keeps the foot in the loop, regardless of shoe type.. The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back...
Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
A complete guide to successful tree felling and wood cutting methods! Loaded with practical information that is essential to the safety and success of any tree-felling and wood cutting operation.
Sheave Dia: 1-1/4"Side Plate: Alum. A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
5/8 inch max rope dia. It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates. It acts as a false crotch using rigging lines and a friction device to lower cut material.
Overall length is 26". Ten holes for perfect adjustment and nickel plated hardware. Lower straps feature split rings which makes securing the stirrup to your foot fast and easy. Riveted for extra strength.
Fully adjustable from 2"to 10'. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Red core alerts you of excess wear.
The red "wear indicator" tells you when it is time to replace it (not repair, replace): Product Benefits
Red core alerts you of excess wear: Product Features
Low stretch, with excellent knot-heat resistance. Average tensile strength: Unspliced : 8100 lb. Full 1/2" size diameter for easier grip. Spliced : 6500 lb. Work load 650 lb. Wt 7.7 lb per 100 ft.
Water soluble, concentrated nutrients to stimulate tree growth! Use Medicap MD for confined root area, mechanical root injury, poor soil conditions, disease or insect stress, frost, surgery or pruning shock.
Tree Tech microinjection units have set a new standard for economical and environmentally safe tree care. Product is administered directly into the tree's vascular system, using a single dose applicator which is manually pressurized.
Measure 12" in diameter x 14" high and holds 150' of 1/2" or 9/16" rope. The convenient drawstring top closure provides quick and easy access. Webbing straps with quick-release buckles that can be used to adjust height of bag or collapse bag when not...
So you need options! Lower-throwing weights provide the highest entry, especially with the Zing-It line and a Big Shot, but dense canopies or rough bark can create enough drag to keep the small weight from reaching back to you.
Specs
Cordura with 7/8-inch nickel-plated rings.: Specs
High visibility blank and orange adds visibility in motion: Specs
Made in the USA of 100% recycled products. Cuffed bottom for added support. Includes pre-installed ties and netting to go over the top to protect young saplings from pesky birds. Note: Tree stakes not included.