Contains detailed chapters about: Tree selection and risk assessment General rules for safe climbing Basic tree climbing gear Setting your climbing ropes Tree climbing knots Climbing techniques Tree climbing ethics Run Time: 1 hr 45 min.
Product Features
Tree selection and risk assessment: Product Features
And weighs 2.3 lbs. It acts as a false crotch using rigging lines and a friction device to lower cut material. It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates.
For added safety, a formed rope retention bar has been added. Lbf., 2,000 WLL.. Stronger, more durable construction. Used correctly this can prevent the limb from coming in contact with a house or power line.
Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when an added wrap or other proper hitch is used. HPE26 is eye-to-eye. Both models are 26-inch.
Specs
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
If every tree were the same, one weight would do the job. Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. Bright high visibility colors enable easy identification. Our weights have a tighter, more aerodynamic design than competition for...
Meets OSHA, ANSI and CSA requirements. Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the...
Specs
Six foot long: Specs
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
SLH12 is rope and snaps only; no prusik. Add your favorite carabiner to the eye to complete the safety lanyard! A 2-in-1 safety lanyard utilizing 12ft Hy Vee 16-strand line which consists of tightly-plied polyester surrounding polyolefin cores, reducing...
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Connects to the side or waist attachment points of a harness with carabiners (sold separately). A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing the Grillon lever will release the line...
Product Features
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied. Pressing the Grillon lever will release line even under load, for quick positioning: Product Features
Reinforced eyes on each end for carabiners (carabiners are not included): Product Features
Metal Grillon lever for releasing line: Specs
Connects to the side or waist attachment points of a harness with carabiners (sold separately): Product Features
The rope is lightweight, flexible, abrasion resistant nylon and includes a protective sleeve for reduced contact to abrasive surfaces: Product Features
The Notch Big Shot Trigger dramatically improves your launching accuracy and consistency with the Big Shot Launcher. Do so by tightening the tension bolt until both halves securely join.
Product Features
Product Benefits
Reduces arm fatigue: Product Benefits
Use with your Notch Big Shot Launcher: Product Features
This duffel bag is spacious AND durable! Whether you take it out into the field, or just use it for storing those "have to have on hand" products, this arborist tote bag gets an A+! Spacious, durable, and easy to carry, the ATB will be number one in your...
Easily shoots a throw bag and up to 200 feet of line through tree limbs! Simple to operate oversized sling-shot that quickly attaches to heavy duty fiberglass poles. Includes Big Shot head and 2- 4ft extension poles.
Product Features
Specs
Works with 3 oz to 20 oz throw weights: Product Features
Description: Includes head and two Leonard 4 ft poles
We recommend using two 4 foot poles together on the ground (included with the BIGKIT and BIGK kits) to eliminate recoil and maximize launch distance: Product Features
One (1) FP400 Leonard 4-foot Orange Fiberglass Sectional Pole: Specs
Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. If every tree were the same, one weight would do the job. Bright high visibility colors enable easy identification. Dual colors of black and orange adds visibility in motion!
Specs
Cordura with 7/8-inch nickel-plated rings.: Specs
High visibility blank and orange adds visibility in motion: Specs
Single "D" capacity. New ergonomic design makes it easy to open the snap with a gloved hand! In two styles: order with or without a nylon rope thimble to reduce wear. Drop forged steel, 5,000 lb tensile strength.
The minimum breaking strength is 3,800 lbs. Aluminum pulley for arborist use! Uses a 1/2 inch rope. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle.
Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely in place while taking up slack in your rigging line. Combine with the Buck Port-A-Wrap III for the ultimate lowering system.
Upper hole for clipping a carabiner around the rope. The wide opening allows the handle to be easily grasped, even with gloves. The toothed cam has a self-cleaning slot to optimize performance even with dirty or frozen ropes.
Product Features
Upper hole for clipping a carabiner around the rope: Product Features
Type: Right Handle
Safety catch is integrated into the body of the rope clamp to help prevent snagging: Product Features
Wide lower hole allows the carabiners of the "progress: lanyard and or footloop to be easily attached: Product Features
Ergonomic molded handle allows a comfortable yet powerful grip: Product Features
Toothed cam with self-cleaning slot optimizes performance even with dirty or frozen ropes: Product Features
Reduces stress symptoms. The go-to solution to minimize transplant stress for trees and shrubs! Protect that investment with BioPlex! A complete, comprehensive, cost effective approach to establishing new plantings.
Sizing note: Allow adjustment for seasonal clothing. This saddle offers the climber a sliding dee saddle with a seat/leg strap combination. Seat and leg straps are lined with soft brown oil tanned top grain steer hide leather.
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
Not to be used with chainsaws over 15 lbs. Of force is applied! Buckingham's tear away bungee chain saw lanyard holds a chain saw if dropped to one's feet, but will pull apart if the chain saw gets hung up in a falling limb.
Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
1 and 1/8 inch ring used to attach the lanyard to your saddle: Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
NOT TO BE USED WITH CHAIN SAWS EXCEEDING 15 LBS. IN WEIGHT: Specs
Double layered leather palm, breathable stretch nylon back. Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your...
Product Features
Carabiner hole to attach gloves to harness: Product Features
Goat skin leather and stretch nylon: Specs
Back made of breathable stretch nylon for excellent fit and ventilation: Product Features
Made of high quality leather for the perfect balance of durability and dexterity: Product Features
Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability. Nickel plated rivets. Top grain leather. 1/2"thick felt cushions the leg.