Not to be used with chainsaws over 15 lbs. 1 and 3/4 inch ring for saw suspension on saddle when not in use and 1 and 1/8 inch ring for saddle attachment. Constructed with a tear away safety pack that activates when 200 lbs.
NOT TO BE USED WITH CHAIN SAWS EXCEEDING 15 LBS. IN WEIGHT: Specs
Measures up to 50 inches fully extended to provide ample reach when cutting: Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
Blocks are commonly used for lowering heavy loads tied under area to be cut with eye sling. Acts as a false crotch using rigging lines and friction device to lower cut material. Stainless steel sideplates and axle.
Takes 3/4" rope.: Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when an added wrap or other proper hitch is used. HPE26 is eye-to-eye. Snap version (HP26) features Buckingham's Steel Safety Snaps.
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
If every tree were the same, one weight would do the job. So you need options! Lower-throwing weights provide the highest entry, especially with the Zing-It line and a Big Shot, but dense canopies or rough bark can create enough drag to keep the small...
Weight: 8 oz
Cordura with 7/8-inch nickel-plated rings.: Specs
High visibility blank and orange adds visibility in motion: Specs
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
By Jeff Jepson, Certified Arborist and climbing champion. The International Society of Arboriculture gives this book their "thumbs up"! Teaches methods of climbing and working safely in trees with a minimum of unnecessary effort and maximum productivity.
Positioning in the Tree: Specs
Tools of the Trade:Webbing Slings: Specs
Tools of the Trade:Figure-8 Device: Specs
Entering the Tree: Specs
Knots for Tree Climbers: Attachment Knots, Friction Hitches, Mid-Line Knots, Bends (End-to-End Tie-Offs): Specs
And weighs 2.3 lbs. 5/8 inch max rope dia. Blocks are commonly used for lowering heavy loads These are often attached under the area to be cut with an eye sling. 28,000 lb tensile, 2,800 lb working load.
Rated to 18,000 lb. For added safety, a formed rope retention bar has been added. Stronger, more durable construction. Lbf., 2,000 WLL.. A second eye allows the user to attach a block and tackle, using an ascender and your rigging line, and hoist up a...
If every tree were the same, one weight would do the job. Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through...
This duffel bag is spacious AND durable! Whether you take it out into the field, or just use it for storing those "have to have on hand" products, this arborist tote bag gets an A+! Spacious, durable, and easy to carry, the ATB will be number one in your...
A galvanized thimble is installed on one end with a safety locking snap with swivel on the other. Fliplines utilizing steel cores provide additional protection from accidental contact with chainsaws! Fliplines are made of 1/4 inch galvanized cable wrapped...
Hi-Viz orange: Specs
Overall thickness: 1/2 inch, including the 1/4 inch cable and braided cover: Specs
Unique rope grab with 90 twist eliminates need for swivel or twisted clevis. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot.
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Red core alerts you of excess wear: Product Features
Provides temporary anchorage to overhead support beam for fall protection systems! 1 3/4" webbing cross-arm strap features a D-ring which slips through a web loop. Rated to 310 lb, tensilestrength 5,000 lb.
Rated to 310 lb: Specs
1 and 3/4" webbing cross-arm strap features a D-ring which slips through a web loop: Product Features
A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum. Rope Dia: 1/2"Weight: 2.4 oz Sheave Dia: 1-1/4"Side Plate: Alum.
It contains highly selected endomycorrhizal fungi and extomycorrhizal fungi that will quickly colonize the roots of new transplants to provide the best possible conditions for the roots to become as effective as possible during the establishment period...
Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never go back to a traditional action sleeve. Gate Opening .99". Major Axis Break Strength 26KN (5845lb).
Allows trees to sway, producing quicker root strength, and improved trunk taper and form! Tree Mate O supports are easy to use and store. Supports are durable and have a cleaner appearance compared to traditional staking.
EPDM band allows tree to sway in wind, increasing caliper at base of tree: Specs
Adjustable length also available in Grower and Greenhouse section: Specs
Measures 10" from center of tree to face of post: Specs