Rated to 310 lb, tensilestrength 5,000 lb. Provides temporary anchorage to overhead support beam for fall protection systems! 1 3/4" webbing cross-arm strap features a D-ring which slips through a web loop.
Specs
Provides temporary anchorage to overhead support beam for fall protection systems: Product Features
Choose 12-inch long strap with a 2 1/2 in. Bright orange color. Or choose the 48-inch long 2-in-1 snap. Half twist helps keep equipment hanging straight! 1-inch wide nylon webbing, ends heat-sealed to prevent fraying.
Type: 16-inch overall length lanyard with snap
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is more evenly distributed for improved performance.
If every tree were the same, one weight would do the job. Bright high visibility colors enable easy identification. So you need options! Lower-throwing weights provide the highest entry, especially with the Zing-It line and a Big Shot, but dense canopies...
For best results, a cow hitch is typically used to secure in place. Note: Knots and bending used to secure the sling will reduce workload limit. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure...
The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved dual-density material provides a wide bottom support surface and an excellent rubberized grip.
Specs
For ropes between 5/16" to 1/2": Specs
Lower holes for connecting a lanyard: Product Features
The upper bushing will accommodate slings up th 3/4" in diameter. Convenient knurled knobs allow for easy rigging of the upper bushing. Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength...
6' length, single leg. Meets OSHA, ANSI and CSA requirements. Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest...
Product Features
Meets OSHA, ANSI and CSA requirements: Specs
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Two safety snaps on either end for easy lock-in or out! A tough, flexible safety strap made of Nybuck - A filament nylon woven into neoprene-impregnated cloth. 5'8" length, 5,000 lb test.
90 degree twist in the adjuster aligns a carabiner perfectly to your saddle. No need for a twisted clevis or swivel. An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline...
Overall length 8': Specs
Includes the Buckadjuster one-way cam: Product Features
Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never go back to a traditional action sleeve. The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment.
Specs
Overall width 2.8": Specs
Overall length 4.2": Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
The rope is lightweight, flexible, abrasion-resistant nylon and includes a protective sleeve for reduced contact to abrasive surfaces. Connects to the side or waist attachment points of a harness with carabiners (sold separately).
Product Features
The rope is lightweight, flexible, abrasion resistant nylon and includes a protective sleeve for reduced contact to abrasive surfaces: Product Features
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied. Pressing the Grillon lever will release line even under load, for quick positioning: Product Features
Here Treeman shares his experience as a tree-climbing teacher and his knowledge of trees to show how you, too, can get high in the treetops using doubled-rope technique. Contains detailed chapters about: Tree selection and risk assessment General rules...
Product Features
Tree climbing ethics: Product Features
Tree climbing knots: Product Features
General rules for safe climbing: Product Features
Tree selection and risk assessment: Product Features
Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. Dual colors of black and orange adds visibility in motion! Bottom loop weights allow quick attachment of carabiners/throw line.
Specs
Shot-filled weight: Specs
Available in 3 different weights: Specs
Bottom loop weights allow quick attachment of carabiners/throw line: Specs
Not to be used with chainsaws over 15 lbs. Constructed with a tear away safety pack that activates when 200 lbs. Measures up to 50 inches fully extended, when relaxed measures 32 inches.
Specs
NOT TO BE USED WITH CHAIN SAWS EXCEEDING 15 LBS. IN WEIGHT: Specs
Measures 32 inches when relaxed: Specs
Measures up to 50 inches fully extended to provide ample reach when cutting: Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
The Notch Big Shot Trigger dramatically improves your launching accuracy and consistency with the Big Shot Launcher. The quick, mid-pole attachment allows you to customize the mounting location.
Product Features
Integrated safety latch: Product Features
Customizable mounting location: Product Benefits
Diameter (inches): 1-1/4: Specs
Quick, mid-pole attachment: Product Features
Use with your Notch Big Shot Launcher: Product Features
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
Slick shot - designed for accurate throwing! Complete with 14oz cordura nylon throw bag, 150' of 1/8" braided polyethylene snag resistant line, and a durable nylon storage bag.
Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle. The minimum breaking strength is 3,800 lbs. Aluminum pulley for arborist use! Uses a 1/2 inch rope.
Upper hole for clipping a carabiner around the rope. The ergonomic molded handle allows for a comfortable yet powerful grip. There is a safety catch integrated into the body of the rope clamp to help prevent snagging.
Product Features
Aluminum and chrome-plated steel contruction: Specs
Ergonomic molded handle allows a comfortable yet powerful grip: Product Features
Safety catch is integrated into the body of the rope clamp to help prevent snagging: Product Features
Type: Right Handle
Wide opening allows the handle to be easily grasped, even with gloves: Product Features
Upper hole for clipping a carabiner around the rope: Product Features
The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. Different color thimbles to easily distinguish each end of the lanyard.
Specs
10ft long: Specs
Blue Streak 16-strand rope looped around a 3-strand twist nylon rope: Specs
Aluminum wheel, 3" tread depth, 3/4" max rope diameter. Aluminum sheave and bushing. 40,000 lb tensile, 4,000 lb working load. Acts as a false crotch using rigging lines and friction device to lower cut material.
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
This will allow you to practice those knots you need to know! Six cards are attached together in corner with a brass grommet. 20 essential knots cover most any rope tying situation: Bowline, Square Knot, Water Knot, Rolling Hitch, Sheet Bend (Doubled...
