If every tree were the same, one weight would do the job. Bright high visibility colors enable easy identification. Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through limbs...
Specs
Weight: 8 oz
High visibility blank and orange adds visibility in motion: Specs
Bottom loop weights allow quick attachment of carabiners/throw line: Specs
A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope. Adjustable from 3 to 6 feet. 5,000 tensile strength.
Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when an added wrap or other proper hitch is used. Both models are 26-inch.
Type: 26-inch Blue Streak Prusik, Steel Snap
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
SLH12 is rope and snaps only; no prusik. Cover yarns treated to enhance abrasion resistance. The 12CV is combined with Tenex eye-to-eye tail for prusik or other friction hitch use.
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. Different color thimbles to easily distinguish each end of the lanyard.
Specs
10ft long: Specs
Blue Streak 16-strand rope looped around a 3-strand twist nylon rope: Specs
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
Ring can clip to saddle to keep saw close to your side when not using. Ring or 12-inch long strap with a 4 in. Or choose the 48-inch long 2-in-1 snap. All straps are double box-stitched for added strength.
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Aluminum pulley for arborist use! Uses a 1/2 inch rope. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle. The minimum breaking strength is 3,800 lbs.
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
This ascender makes a great companion to the Pantin foot ascenders or can be used with the old-fashioned "footlock". Use with rope diameters 8 to 13 mm. The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved...
Specs
For ropes between 5/16" to 1/2": Specs
Lower holes for connecting a lanyard: Product Features
Easily shoots a throw bag and up to 200 feet of line through tree limbs! Simple to operate oversized sling-shot that quickly attaches to heavy duty fiberglass poles. Pick up a Big Shot Trigger and improve accuracy and reduce arm fatigue!
Product Features
Specs
Ship wt: 9 lb
Works with 3 oz to 20 oz throw weights: Product Features
Launches throw-weights nearly 200 feet: Product Features
Two (2) Jameson 4-foot Fiberglass Poles: Specs
One (1) FP400B Leonard 4-foot Orange Fiberglass Base Pole: Specs
An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline rope lanyard comes with a BuckGrab adjuster for simple and quick length adjustment.
Includes the Buckadjuster one-way cam: Product Features
Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely in place while taking up slack in your rigging line. Safe working load of 2,250 lb.
Angled style design. Velcro climbing pads have a double back cinch loop that provides a snug fit to the leg! Steel insert keeps the climber stationary and is compatible with Buckingham titanium/steel and Bashlin aluminum climbers.
Specs
Sold per set: Specs
Compatible with Buckingham titanium/steel and Bashlin aluminum climbers (we don't sell the Bashlin brand but if you own a pair it will work: Specs
Thick Cotton Saddle with Four D-rings for more stability. 1" neoprene leg straps keep the seat strap in place during use. The cotton webbing is reinforced with nylon providing comfort and strength.
Specs
Weight 5.2 pounds: Specs
Four D-rings, cotton webbing reinforced with nylon: Specs
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard.
Product Features
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Six foot long: Specs
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability. 1/2"thick felt cushions the leg. Nickel plated rivets.
Ten holes for perfect adjustment and nickel plated hardware! Upper straps are necessary to secure spur sets to the climber's leg. Latigo steer hide leather. Overall length of 26". 1" wide with roller buckles secured on top grain latigo steer hide wear...
Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc. For best results, a cow hitch is typically used to secure in place.
