Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
The wide lower hole allows the carabiners lanyard and/or footloop to be easily attached. The ergonomic molded handle allows for a comfortable yet powerful grip. There is a safety catch integrated into the body of the rope clamp to help prevent snagging.
Product Features
Color: Yellow
Ergonomic molded handle allows a comfortable yet powerful grip: Product Features
Toothed cam with self-cleaning slot optimizes performance even with dirty or frozen ropes: Product Features
Safety catch is integrated into the body of the rope clamp to help prevent snagging: Product Features
Type: Right Handle
Better grip on wet ropes is safer: Product Benefits
Major Axis Break Strength 26KN (5845lb). The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment. Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never...
Specs
Gate opening 1": Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
Fully adjustable from 2"to 10'. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Red core alerts you of excess wear.
Product Features
Red core alerts you of excess wear: Product Features
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Provides temporary anchorage to overhead support beam for fall protection systems! 1 3/4" webbing cross-arm strap features a D-ring which slips through a web loop. Rated to 310 lb, tensilestrength 5,000 lb.
Product Features
Specs
Provides temporary anchorage to overhead support beam for fall protection systems: Product Features
6' length: Specs
1 and 3/4" webbing cross-arm strap features a D-ring which slips through a web loop: Product Features
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
1 and 3/4 inch ring for saw suspension on saddle when not in use and 1 and 1/8 inch ring for saddle attachment. Constructed with a tear away safety pack that activates when 200 lbs.
Specs
Measures 32 inches when relaxed: Specs
1 and 1/8 inch ring used to attach the lanyard to your saddle: Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
A complete guide to successful tree felling and wood cutting methods! Loaded with practical information that is essential to the safety and success of any tree-felling and wood cutting operation.
SLH12 is rope and snaps only; no prusik. Add your favorite carabiner to the eye to complete the safety lanyard! A 2-in-1 safety lanyard utilizing 12ft Hy Vee 16-strand line which consists of tightly-plied polyester surrounding polyolefin cores, reducing...
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through limbs and branches. If every tree were the same, one weight would do the job.
Specs
High visibility blank and orange adds visibility in motion: Specs
Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc. Note: Knots and bending used to secure the sling will reduce workload limit.
Made of 16 strand 1/2" rope whipped eye splice to provide maximum safety! Whipped end and eye insure for a secure split tail. 5' length available in contrasting colors to differentiate from climbing line.
Blue color that won't fade or run, with high visibility in trees. All polyester climbing rope with high strength, low stretch, excellent abrasion resistance and a long service life! The single braid construction eliminates the need for milking and stays...
Specs
Product Features
100% polyester: Product Features
Non-rotational: Specs
Fiber: 100% polyester: Specs
Rot and mildew resistant: Specs
Stays firm and round in use.: Product Features
Can also be used for light/medium duty rigging operations: Product Features
By Jeff Jepson, Certified Arborist and climbing champion. The International Society of Arboriculture gives this book their "thumbs up"! Teaches methods of climbing and working safely in trees with a minimum of unnecessary effort and maximum productivity.
Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates the ankle bone and the offset stirrup sits in the center of the foot. High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary.
Specs
3 & 1/2" fixed gaff (spike): Specs
Consists of our CSR312 climbers, leather pads, and nylon leg & foot straps: Specs
Use with rope diameters 8 to 13 mm. The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved dual-density material provides a wide bottom support surface and an excellent rubberized grip.
Specs
For ropes between 5/16" to 1/2": Specs
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling): Product Features
Overall length is 26". Yellow top grain Latigo steer hide leather! Lower straps are necessary to secure spur sets to the climber's leg. Riveted for extra strength. Ten holes for perfect adjustment and nickel plated hardware.
This construction keeps a firm, round shape that provides an extra measure of safety. Smoothest cover runs well through cammed devices; tightest cover in the industry. XTC Fire was specifically designed for the demanding needs of the professional arborist.
Asking price for spade is 6500.00 with crawler asking 9500.00 this spade works excellent and ready to go. Im selling a Vermeer strech 32 tree spade used. The spade attachment is in very good condition and is attached to an articulating 4wd gas powered...
A new premium double braid lightweight climbing line available in two colors! Velocity Cool and the new visibility Velocity Hot. Velocity Cool is green, blue and white and Velocity Hot is orange, red and white.
Specs
Meets all ANSI standards: Specs
7/16" diameter: Specs
24-strand braided polyester construction with stabilized nylon core: Specs
Length: 120ft
6000 lb breaking strength, 10 to 1 working load: Specs
