Trash Water Pumps For Sale

Can also be used to drive other hydraulic equipment, 4473 hours, strong running diesel. Well maintained 2004 Case 4391TA Hydraulic Power Unit ( 110 HP)designed to power a water pump head ( not included).

Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Hours 687 Pyro Alarm and Auto Shut Down Rockford PTO unit Cornell Pump Model 5HH-F18 Serial# 85650 8" suction 5" discharge 750 - 2500 GPM SOLD

Trash Pump 2" Minimum: $36.50 Daily: $49.00 Weekly: $196.00 Plus $5.00 per day per 50' hose PLUMBING

Out put 264 gpm. 6hp gas, pull start, 2.3 gallons, RPM 3600, cast iron Impellor, Aluminum pump housing, Low oil Protection. One year factor warranty. Factory warranty. PTP Pacific 300 264 gpm trash pump new, still in factory plastic wrap.

Will pump over 600 gal/min Barnes 4\"Self Priming Centrifigal Trash Pump (trailer mounted) 28 foot suction pipe and strainer included 70 foot layflat discharge hose included quick disconect on suction and discharge Engine: Ford D172 gasoline, 58.5...

Thompson Pump is respected worldwide for its sophisticated heavy-duty lines of high-quality portable pumps, ranging in size from 2”-18”, for use in varied applications in the areas of public works, municipalities, construction, agriculture, dewatering,...

12FT lift, 25FT Head; 3x3 inch Semi-Solid material handling; 5.5HP Honda/\"Titan\" gasoline engine; easy recoil start; heavy-duty polyethylene strainer. New - Titan Industrial Model PT-300 3x3 Industrial Trash Pump; 300GPM; 18,000 gal/hr.

Pump was used for temporary dewatering of large detention pond. Pumpbody was installed new in 2005. Engine is in serviceble condition but uses some oil. Skid has built-in fuel tank(not sure about capacity,50 gals ?).

Our patented Low Water Shut-Off Technology automatically senses when the water is low and turns itself off. If your fountain or water feature is near a windy, arid or sunny area or if you sometimes leave the fountain unattended for a few days, water levels...

Integrated filter pad protects pump from debris and helps to insure quiet operation. Compact design allows for the pump to be placed in small areas and will operate in as little as 1/2 in.

This pump may be used horizontally or vertically and includes rotational adapters to allow flexibility in any water feature. Alpine's Eco-Twist is an energy efficient pump, touting a 70% reduction in power consumption compared to the standard pump.

And a maximum flow of 1,800 GPH. This pump has a maximum capacity of 1,875 gal. This waterfall pump has a maximum lift of 195-39/64 in. This submersible pump comes with a filter for easy installation.

This heavy-duty corrosion resistant stainless steel submersible waterfall pump provides long life in rough environments. The water cooling and oil free motor design is safe to use around.

This pump may be used horizontally or vertically and includes rotational adapters to allow flexibility in any water feature. Alpine's Eco-Twist is an energy efficient pump, touting a 70% reduction in power consumption compared to the standard pump.

This submersible pond pump requires a 115-Volt power supply and 1/2 in. And a maximum flow of 800 GPH. Diameter tubing (tubing not included). This outdoor pond pump has a maximum lift of 154-51/64 in.

The Sea Flow Pumps are designed to operate for years with proper maintenance. Features state of the art engineering designed to circulate more water in less time using less energy creating less noise.

Designed to operate continuously with minimal energy consumption, magnetic-drive pumps or a corrosion resistant body specifically for submersible use. Easy to install and maintain, magnetic-drive pumps are ideal for a variety of applications.

Quiet 1 Pond and Water Garden Pumps Pro Series. For submersible or dry applications. Even better and quieter than before as much as 50% less.

This Pump combines new impeller and shaft design and materials to produce optimal performance and efficiency. This pump is very easy for the end user to service, containing modular parts and also includes flow controls in the model 200-6000 pumps.

Its rotating outlet pipe provides a convenient connection for 3/8 in. This Beckett 0.005 HP Submersible Fountain Pump is excellent for use with both indoor and outdoor fountains. It efficiently pumps 40 GPH at a height of 1 ft.

Tubing (not included) for your convenience. This energy efficient pump offers a 1,200 GPH maximum flow and features quiet technology to help limit sound disturbances, so you can enjoy your pond.

The pump is designed for continuous use, features wet rotor technology and can pump up to 130 GPH at 1 ft. The pump includes adjustable flow control and a 6 ft. Power cord for convenience.

Easily adjustable flow control allows you to set the flow to achieve the desired effect. It is both submersible and in-line capable and attaches to 1/2, 3/4 and 1 in. The Aquarius Universal 180 pump is ideal for medium sized water features such as: bubbling...

This Pump combines new impeller and shaft design and materials to produce optimal performance and efficiency. This pump is very easy for the end user to service, containing modular parts and also includes flow controls in the model 200-6000 pumps.

Engineered to be highly energy efficient touting a 75% reduction in power consumption compared to standard pumps, while maintaining maximum output. Pumps feature a convenient carrying handle and 360° rotating adapters for flexible placement.

Unique diffuser and impeller provide excellent pressure performance across wide range of desired gallon per minute flow rates. The pump housing bracket diffuser, hair and lint pot and impeller are made from high quality thermoplastic material.

Engineered to be highly energy efficient touting a 75% reduction in power consumption compared to standard pumps, while maintaining maximum output. Pumps feature a convenient carrying handle and 360° rotating adapters for flexible placement.