Surface Tension Meter

Complete with built-in multi-parameter sensors, wrist strap, and CR2032 battery. Measures air velocity, air flow, temperature, humidity, wet bulb, dew point, heat index, wind chill, barometric pressure, altitude and UV light.

Comes complete with 9-Volt battery. It features fast/slow response time and an analog output (1mV per count) for capturing readings to a recorder. Foot Candle/LUX Meter measures light level to 5000FC (foot-candles) and 50,000 LUX with a 5% accuracy using...

Complete with built-in stand, light sensor and protective cover with 36 in. Features include: Store and Recall up to 50 measurements with relative or real time clock stamp, Luminous intensity (candela) calculation, a ripple function that excludes stray...

Data hold freezes reading on display MIN/MAX readings Zero function Cosine and color corrected measurements Low battery and over range indication Auto power off to save battery life Utilizes precision silicon photodiode sensor with 3 ft.

Coiled cable for easy storage. Auto power off to save battery life. Multiple wide measuring ranges: 20,000Fc in 4 ranges and 20,000Lux in 4. Meter utilizes precision silicon photo-diode sensor with 3 ft.

Sensor has 47 in. Pocket Light Meter has measuring ranges of 200Fc and 2000Fc (Foot Candles) with max. Resolution of 0.1Fc. Simple operation. Built-in stand. Comes complete with 9-Volt battery.

The EN100 has a field replaceable low friction vane wheel which improves air velocity accuracy. Measures air velocity, air flow, temperature, humidity, wet bulb, dew point, heat index, wind chill, barometric pressure, altitude and visible light.

Comes complete with 9-Volt Battery, Remote Light Sensor on a 46 in. Built-in RS-232 interface with optional Data Acquisition Software and Data logger. Heavy Duty Light Meter has 4 lighting type settings for enhanced accuracy (Tungsten/Daylight, Fluorescent,...

Coiled cable (expandable to 24 in.). This handheld instrument measures up to 40,000 Fc (or 400,000 Lux) utilizing a remote light sensor connected via 12 in. Insufficient lighting can create security risks or result in OSHA crackdowns.

Coil compresses to 7½" to provide 250 lb of pull. Compression type spring to be installed in each fence line next to ratchet or wire strainer.

Insulated wire strainer with pre-attached wire rope that fits up to 7.5" posts. No wire tying or special tools needed.

Data hold freezes reading on display Min/Max readings Zero function Cosine and color corrected measurements Auto power off to save battery life Utilizes precision silicon photo-diode sensor with 3 ft.

Comes complete with light sensor with 3 ft. It features: 5% accuracy, Peak mode (10us), Relative mode, Min/Max, Data Hold, backlit LCD display with 40-segment bar graph and a rugged double molded housing.

Comes complete with light sensor with 3 ft. In addition, the data logger function can automatically store up to 16,000 readings or manually store/recall up to 99 readings. Light Meter measures from 0 to 40,000Fc and 0 to 400kLux in with 0.01Fc/0.1Lux...

Product includes certificate traceable to NIST calibration. Complete with 6 x AA batteries, SD card, hard carrying case and light sensor with protective cover. Wide range to 10,000Fc or 100kLux.

Complete with 6 x AA batteries, SD card, hard carrying case and light sensor with protective cover. Utilizes precision silicon photo diode and spectral response filter. Large backlit LCD display.

About Shisei: Shisei bonsai tools are manufactured by the same elite tool manufacturers used by the well recognized brand Masakuni for some of their outsourced tools. Useful for removing needles as well as debris from your bonsai tree.

It is often used for cutting roots. Overall length of the root cutter is approximately 11.5 inches. Carbon steel tools are made of high quality carbon steel making them extremely durable and similar in finish to stainless steel tools.

The Curved Spade on the other end can also be used to adjust the roots of your tree or for repotting. Useful for removing needles as well as debris from your bonsai tree. One of our most popular tweezers.

Specifically for use with your precious bonsai tree. These Bonsai Saws have a sharp blade designed for cutting branches. Thin blade lets you slip through branches easily. Saw toothed blade makes cutting branches effortless.

About Shisei: Shisei bonsai tools are manufactured by the same elite tool manufacturers used by the well recognized brand Masakuni for some of their outsourced tools. The bonsai root rake is useful for loosening top soil to promote aeration and water...

About Shisei: Shisei bonsai tools are manufactured by the same elite tool manufacturers used by the well recognized brand Masakuni for some of their outsourced tools. The indentation will help decrease the healing time of the tree.

The knob cutter makes a slight indentation into the trunk when cutting off a branch in its entirety. The special shape of this tool makes it ideal for removing trunk knobs and branches with minimal damage to the tree.

Edges are sharp enough to cut through bark and cambium smoothly with control. Features a comfortable wooden handle that won't slip easily. This tool helps you easily and safely strip the bark and cambium off of your branches to expose the wood when working...

Fixed size of the branch bender is 4". Adjust the pressure by increasing or decreasing screw tension. Branch benders are used on bonsai trees to add additional pressure during shaping.

About Shisei: Shisei bonsai tools are manufactured by the same elite tool manufacturers used by the well recognized brand Masakuni for some of their outsourced tools. Useful for cutting thick branches and creating jins.

No batteries required. An easy tool to monitor your bonsai plant's soil pH level. Simply insert the attached reading stick a few inches to get an instant read. No messy tubes or strips to throw away after use.