Supplies Ph, Ec Amp Tds For Sale In Canada

Range: 0 – 80 degrees Celsius • Resolution: 1 ppm, 1 degree Celsius • Accuracy: +/- 2% • Conversion Factor: NaCl (avg. It is directly related to the purity of water and the quality of water purification systems and affects everything that consumes,...

The DiST5 (Dissolved Solids Tester) ships complete with a probe, removal tool, batteries and complete instructions. Features: • Dual level display • Replaceable graphite electrode — high accuracy! • Rugged waterproof casing is designed to float!...

Easy to use, simply place the probes into your solution and the selected reading is displayed on screen. Conductivity and temperature do NOT need to be calibrated as this is locked in during manufacture.

PH Down: This acid formulation uses food grade phosphoric acid to lower the pH to the proper level. To maximize plant growth, the pH of your nutrients should be slightly acidic. However, some important exceptions do exist.

DIRECTIONS FOR USE: Maintain the optimum pH level of 5.5 to 5.8 for hydroponically grown and 6.2 to 6.5 for sphagnum moss and soil plants. If using hard water, pH may climb to 7.5 or higher.

Pop in a HANNA Replacement Electrode, and you'll be back in business! Compatible with: • HI 98129 and HI 98130 Combo multi-parameter testers • HI 98127 and HI 98128 pHep testers • HI 98121 ORP tester (measures dissolved oxygen) Grower's Tip: Hanna...

Super concentrated, just a few drops per test. Grower's Tip: To optimize plant growth indoors, the pH level of your nutrient solution should be between 5.5 and 6.5. Adjust with pH buffer solutions, as needed.

One year warranty. A simple, inexpensive solution to accurate testing! The Champ is a HANNA pH Tester that fits comfortably in your hand and includes a larger LCD which makes it easier to read at any angle.

Features: • Dual level display showing pH and temperature • Automatic temperature compensation • Replaceable pH electrode featuring an extendable junction • Rugged waterproof casing is designed to float! • Automatic calibration Size: 6.4″...

Wait for reading to stabilize. Grower's Tip: To ensure accurate readings the double junction probe needs to be rinsed in water after each use and cleaned prior to calibration. Features: • Successful calibration indicator • Measures pH and temperature...

Moreover, the unique design of the electrode provides longer life in aggressive solutions. Warranty: 2-years (six months on electrode). Easy to use, just install over your nutrient reservoir for continuous measurement.

The probe, built for horticulture and hydroponics applications, compensates for temperature variations automatically, is very stable and requires little maintenance. Warranty: 2-years (six months on electrode).

Press and hold the button for a few seconds and the device automatically enters calibration mode. One year warranty. Instruction Manual (PDF) Easy to operate, just press the button on top of the meter once and it's powered and ready for use.

In just one glance the Bluelab Guardian Monitor measures all three critical parameters for healthy plant growth; pH, conductivity and temperature. Instruction Manual (PDF) Do's and Don'ts (PDF) Grower's Tip: With this quality instrument you have the ability...

Features: • EC (0.2 – 3.6), CF (2 – 36) and ppm scales (TDS and 700 scale) • Fully waterproof • Auto sense on and off • Battery life minimum 1 year (or shelf life of battery) • 5-Year Manufacturer's Warranty Size: 16″ (40.7cm) long Instruction...

The HANNA pH EC TDS Meter continuously monitors the three most crucial nutrient parameters in hydroponic, greenhouse and horticultural applications. The HI 991404 ships complete with a non-clog double junction pH electrode and a rugged conductivity/ TDS...

Sensor probes do NOT last forever and will eventually fail. Features: • Fully waterproof, submersible to 10 meters • Quality BNC connection • Tough polypropylene barrel • Heavy duty thick wall glass stem • Warranty: 6-months Instruction Manual...

Within 1 hour check the pH and adjust accordingly. Product Label (PDF) Ingredients: Phosphoric acid. DIRECTIONS FOR USE: Maintain the optimum pH level of 5.5 to 5.8 for hydroponically grown and 6.2 to 6.5 for sphagnum moss and soil plants.

Available in 2 lb and 10 lb sizes. Mix solution thoroughly and adjust pH prior to application. Optimal pH range for fertilizer/ nutrient solution for most plant and turf is 5.5 – 6.5. Will vastly improve all fertilizer solutions performance.

Wait 15-30 minutes, and test your water again. However, some important exceptions do exist. PH Up: This base solution is formulated using potassium hydroxide and potassium carbonate.

Warranty: 1-year (six months on electrode). Do NOT use distilled or deionized water. The HI 98129 features a replaceable electrode as well as an EC/TDS graphite electrode, which resists contamination by salts and other substances.

Instruction Manual (PDF) Grower's Tip: The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Housed in a water-resistant case, this pH Monitor by HANNA Instruments was originally designed for the greenhouse and hydroponics...

Warranty: 1-year (six months on electrode). The HANNA Checker Digital pH Meter is fitted with a long and sturdy electrode that supplies fast and accurate readings from 0 to 14. Two-point calibration is simple to perform.

Lower pH with these all natural pH adjusting crystals. Optimal pH range for fertilizer/ nutrient solution for most plants is 5.5-6.5. Will vastly improve all fertilizer solutions performance.

A must have in every grower's toolbox! Bluelab Calibration Solution is used to ensure that your testing equipment is working properly and giving accurate readings. Bluelab pH meters are calibrated to pH 7.0 first then to pH 4.0. The company's conductivity/...

Step 2: ALL HANNA meters will need to be calibrated to pH 7 buffer first. While the meter is waiting for the reading to stabilize a clock symbol or hour glass symbol will flash. Available in 20 ml packets that are always fresh and easy-to-use.

Place the electrode into the liquid so that the bottom inch of the electrode is submersed. Available separately in 500 ml bottles. Step 2: ALL HANNA meters will need to be calibrated to pH 7 (HI 7007) first.