Superior Irrigation Valve

1

• Installation: Above Ground
• Product Height (in.): 5
• Inlet Size (in.): 1
• Package Quantity: 1
• Product Weight (lb.): 5 lb
• Maximum Pressure (psi): 180

• ✓ 1 in. Male national pipe thread
• ✓ Easy to install

• Inlet Size (in.): 1
• Irrigation System Component: Valve
• Maximum Pressure (psi): 120
• Returnable: 90-Day

• ✓ Heavy-duty cast-brass construction
• ✓ Full flow control and anti-siphon valve
• ✓ Use with irrigation system to help prevent backflow of contaminated water from entering household water supply

• Outlet Size (in.): 2 or less
• Manufacturer Warranty: None
• Material: Brass

• Maximum Pressure (psi): 120
• For cold water use only: Yes
• Outlet Size (in.): 2 or less
• Compatible Pipe Material: PVC
• Number of Outlets: 2
• Connection: Solvent x Solvent

• ✓ 4-1/2 in. valve footprint
• ✓ Flow control helps you fine-tune the amount of water pressure going to each individual zone, reducing misting and fogging at the sprinkler and saving water

• Connection: Female Pipe Thread
• Valve Type: Anti-Siphone
• Number of Outlets: 2
• Material: PVC

• ✓ Built-in atmospheric backflow preventer helps protect against contamination
• ✓ Manually activates zone sprinklers with the turn of a handle
• ✓ 4 5/16" Footprint Size (Center to center of inlet/outlet)

• Connection: Female Pipe Thread
• Package Quantity: 1
• Pressure Rating: 75

• ✓ 1 valve can replace up to 4 1 1/2 in. solenoids
• ✓ Above- or below-ground installation for flexible placement options

• Returnable: 90-Day
• Outlet Size (in.): 2 or less
• Manufacturer Warranty: 1 year replacement
• Thread Type: none

• ✓ For cold water use only
• ✓ Automatically drains sprinkler lines when the water is turned off to prevent pipes from freezing

• Inlet Size (in.): .75
• Product Height (in.): 1.25 in
• Connection: Female Hose Thread
• Outlet Size (in.): 2 1/8 - 2 1/4

1

• ✓ Low lead bronze body construction
• ✓ ASSE listed 1024, CSA certified, NSF listed - standard 61, annex G

• Package Quantity: 1
• Material: Brass
• Valve Type: Double Check
• Inlet Size (in.): 1

• Product Weight (lb.): 1.25 lb
• Connection: Male x Barb
• Compatible Pipe Material: PVC
• Product Width (in.): 7 in
• Manufacturer Warranty: 1 YR
• Install using Toro 53687 grease caps (not included): Yes

1

• Number of Outlets: 2
• Product Length (in.): 3.875
• Inlet Size (in.): 1
• Works with standard residential 24-Volt sprinkler systems: Yes
• Thread Type: Female
• Package Quantity: 1

• Returnable: 90-Day
• Thread Type: none
• Inlet Size (in.): 1.25
• Operation: Automatic,Manual
• Outlet Size (in.): 2 or less
• Product Length (in.): 6 in

• ✓ UV resistant
• ✓ Compatible with most industry standard 24-Volt sprinkler systems

• Material: Acrylonitrile Butadiene Styrene (ABS)
• Returnable: 90-Day
• Product Weight (lb.): 1.3 lb
• Connection: Female Pipe Thread

• Product Weight (lb.): 22 lb
• Backflow preventer comes complete with 2 full port resilient seated ball valves for shut-off along with 4 resilient seated ball valve test cocks: Yes
• Product Width (in.): 20.31
• Product Length (in.): 5.68
• Maximum Working Temperature (F): 140
• Returnable: 90-Day

• ✓ Manual external bleed screw – provides for manual operation in system start up
• ✓ Heavy duty, corrosion and UV resistant PVC construction – increases the life of the valve

• Inlet Size (in.): 1
• Manufacturer Warranty: Five Year Limited Warranty
• Pressure Rating: 10 - 150 PSI
• Irrigation System Component: Valve

• ✓ IAPMO approved
• ✓ Convenient jar top for easy service
• ✓ Electric H-body atmospheric vacuum breaker

• Product Length (in.): 3.25 in
• Manufacturer Warranty: 6
• Returnable: 90-Day

• ✓ Convert a manual irrigation or sprinkler valve to an automatic valve
• ✓ For irrigation applications only
• ✓ Flow-control adjustment

120

• Operation: Automatic
• Maximum Working Temperature (F): 120
• Maximum Pressure (psi): 120

• Product Length (in.): 6 in
• Product Weight (lb.): 2lb
• Number of Outlets: 6
• Connection: Slip-Joint
• Inlet Size (in.): 1.25
• Only use standard clear PVC cement (not included) when installing the valve and allow the valve 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and never the valve housing: Yes

• ✓ Use in residential, commercial and irrigation applications
• ✓ Made for installation on potable water lines

• Thread Type: FIP
• Pressure Rating: 175
• Product Height (in.): 4.25
• Returnable: 90-Day

• Product Height (in.): 0.7
• Compatible Pipe Material: PVC
• Operation: Automatic
• Package Quantity: 1
• Returnable: 90-Day
• Manufacturer Warranty: 1 year

• ✓ Manual internal bleed through solenoid permits manual operation without discharging water outside the valve
• ✓ Captured plunger allows you to remove the solenoid without losing the internal plunger
• ✓ Self cleaning metering screen - screen is in turbulent flow of water for self-cleansing action during operation

• Product Width (in.): 3 in
• Irrigation System Component: Valve
• Product Length (in.): 5 in

• Outlet Size (in.): 2 or less
• Maximum Working Temperature (F): 125
• Designed for in-line (below ground) installation: Yes
• Product Length (in.): 4.75 in
• Returnable: 90-Day
• Pressure Rating: 15 - 150 psi

• ✓ 1 inch female threaded inlet and outlet (use 1 inch MPT threaded pipe adapters with Teflon tape)
• ✓ Designed for below-ground installation, out of sight and away from playful hands
• ✓ Designed for in-line (below ground) installation

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Product Width (in.): 3.37 in
• Maximum Pressure (psi): 150

• Product Length (in.): 5.125 in
• Product Height (in.): 5.25 in
• Returnable: 90-Day
• Universal use with residential and light commercial sprinkler systems: Yes
• Outlet Size (in.): 2 or less
• Inlet Size (in.): 1

• ✓ This valve can run 7 or 8 zones depending on the cam configuration
• ✓ Standard flow stem and disc assembly (included) requires a minimum of 10 GPM, the low-flow stem and disc assembly requires a minimum of only 6 GPM (not included)

• Maximum Working Temperature (F): 130
• Thread Type: none
• Product Weight (lb.): 3lb
• Outlet Size (in.): 2 or less

• Connection: FIP x FIP
• Backflow preventer comes complete with 2 full port resilient seated ball valves for shut-off along with 4 resilient seated ball valve test cocks: Yes
• Material: Brass
• Operation: Automatic
• Valve Type: Reduce Pressure Zone
• Product Weight (lb.): 45 lb