3 lb head and 16" handle. All around hammer for driving in stakes, breaking up paving rocks, and many more uses! Head constructed of high strength carbon steel with sledge and cross peen faces.
No need to bore, no voids to fill, no chance of collapse or sinking. Choose 1" or 2" models depending on your PVC pipe diameter. Consists of a shaft with a pointed tip and strike plate to drive the pipe easily into place.
Product Features
Product Benefits
No need to bore a first hole: Product Features
With no boring, there are no voids around the installed pipe, eliminating the chance of collapse or sinking of the soil above the pipe: Product Benefits
Installation in 1 to 3 minutes depending on soil: Product Features
No need for other equipment like power tools: Product Features
No need to drag around a lot of other equipment: Product Benefits
Genuine 16" hickory handle with comfort grip, patented head design. The one-of-a-kind, one-hand tool for all gardening work! Lightweight with contractor-tough quality, exceptional balance: for cultivating beds, chopping roots, or working in rows.
Vaughan designed the iron head of this hammer for uniform clamping pressure to both the hardwood handle and its 2 in. You can rotate and replace the rawhide faces of this hammer! The Vaughan 4-lb rawhide hammer allows for controlled, non-marring strikes.
An ultra-sharp edge and virtually unbreakable design maximizes the performance of this blade. The combination of features allows this blade to bite deeper when chopping. This designed makes the hatchet ideal for chopping kindling and small- to medium-sized...
Product Features
Perfected balance and power-to-weight ratio increases swing speed to multiply power, much like an aluminum baseball bat: Product Features
Low-friction blade coating powers through wood and prevents head from getting stuck: Product Features
Shock-absorbing FiberComp handle is lightweight yet stronger than steel to prevent overstrike damage: Product Features
Hardened forged steel blade stays sharp longer than traditional axes: Product Features
Designed in Billns, Finland, building on more than three-and-a-half centuries of the worlds best forged tools: Product Benefits
Included sheath helps protect blade and the user: Product Features
Height is quickly adjusted with a 3 position removal pin and adjustment screw for fine adjustment. Cutting depth is 3-3/8in. Offers a fast and economical cutting of bricks and pavers! The cutting blade is 10in wide to allow for cutting angles.
Both handles are made of sturdy hickory wood. For Halder Simplex 80mm Mallets Choose from either a 16-inch standard style or a 28-inch sledge-style replacement handle for simplex 80mm mallets.
Hickory handle. It also works great on machinery. This simplex sledgehammer is equipped with a 31 in. It also comes with 2 durable rubber striking faces. This sledge features Halders patented split-housing design.
Product Features
Weight: 7 Pounds: Product Features
31-inch hickory handle: Product Features
Replaceable 80mm rubber striking faces: Product Features
Seymour equipped each of these axes with a sturdy 36-inch genuine hickory handle! Need an extra handle? Find them HERE . An industry staple! Seymour designed their Michigan Single Bit Axe with quality in mind! Choose from either a 3-1/2 or 5-pound bit...
Specs
Bit Size: 3-1/2 Pounds
Bit type: Single bit: Specs
Handle material: American hickory: Specs
Bit size: Choose from 3-1/2 pounds (AX-3) or 5 pounds (AX-5): Specs
Also ideal for tapping tile into thinset. Non-marking white face; 32 oz; Rubber face won't damage pavers and has been designed to minimize bounce when striking.
Pick length is 3 and 3/4". Mattock measures 3" W x 4" L. Pick end side digs and breaks up soil for removal. Weight is almost 2 lb. 16" fiberglass handle. This little tool is great for getting in tight spots for planting and more! Unique, fully forged...
Specs
16" fiberglass handle: Specs
Mattock measures 3" W x 4" L. Pick length is 3 and 3/4". Ovarall head length is 9 and 1/2: Specs
This gives this wood cutter an unprecedented level of comfort and control. And inside that handle is a hollow cavity with a magnet in it that holds a knife! The axe head itself is engineered from forged steel which holds its edge.
Specs
Weighs 23 & 1/2 oz: Specs
Overall length 7in: Specs
Blade length 2 & 7/8in: Specs
The ax specs:: Specs
Knife hides in the handle untill you are ready for it: Product Features
Great for many one-handed tasks ranging from demolition to driving stakes. This club hammer features Fiskars' patented Isocore shock control system to reduce shock and vibration by 2 times.
Perfect 45 and 90 degree angles. Includes carrying case. Folds for easy storage, lightweight, and rugged! Use for paver layout, tile, framing, and landscape work.
Product Features
Perfect 45 and 90 degree angles: Product Features
Includes carrying case: Product Features
One side is 67 & 3/4 in long, the other two are 48 in long: Specs
The mallet features two different faces, both of which are replaceable. Use the white face for clean, non-marring work and the black face for dirtier jobs. A dual-purpose mallet designed for durability! The Vaughan 24-oz rubber mallet features a one-piece,...
See set contents below in SPECS. These sets feature 72-tooth ratchet drives for a 5˚ swing that's perfect in tight spaces, convenient quick release button operation, and 3/8"drive 12-point sockets to increase fastener contact area for maximum torque.
Specs
(1) 3/8" (Female) to 1/4" (Male) Adapter: Specs
(1) 3" Extension: Specs
3/8" DRIVE:: Specs
(12) 1" Driver Bits: Phillips, slotted, Torx, and hex: Specs
Save nearly $15.98 over buying each individually! We've combined our popular 1286 Pruning Shear and SCC8 Pruner Sheath, tackling pruning diameters up to 1in effectively.
