A one-piece aluminum alloy handle and head make this hammer extremely durable. You can easily replace the faces of this hammer with a simple twist of the wrist thanks to their threading.
Product Features
Overall length: 14-1/2 in.: Product Features
Neoprene compound grip: Product Features
Handle length: 11-1/2 in.: Product Features
Replaceable 64mm threaded nylon faces: Product Features
You can rotate the faces for even wear and increased durability. Vaughan has compressed and thoroughly seasoned these faces for uniformity and durability. This face measures 2 inches in diameter.
Consists of a shaft with a pointed tip and strike plate to drive the pipe easily into place. No need to bore, no voids to fill, no chance of collapse or sinking. Choose 1" or 2" models depending on your PVC pipe diameter.
Product Benefits
Installation in 1 to 3 minutes depending on soil: Product Features
Quick installation means more time for other projects: Product Benefits
With no boring, there are no voids around the installed pipe, eliminating the chance of collapse or sinking of the soil above the pipe: Product Benefits
Choose 1" or 2" inner diameter: Specs
No need to drag around a lot of other equipment: Product Benefits
Snap them onto any shovel, rake, or other long-shafted tool in seconds! Choose your desired size below. This simple tool saves your back! These ergonomic handles help you avoid serious bodily injury from over-exertion.
Fits Shaft Diameters: 1-1/5 inches to 1-1/3 inches
Mallet head is filled with steel shot providing reduced rebound by allowing impact energy to be absorbed. All-steel construction! Supercraft 4-lb dead-blow mallet with 60mm replaceable hard nylon faces.
11in maximum opening. Serrated tempered steel blades. Use to remove a single paver that has been in place for a long time! Adjustable jaws can be reset quickly to accommodate most stone shapes & sizes.
Specs
Handles are 23 & 1/2 in high: Specs
Adjustable jaws with steel blades: Product Features
Appreciable lightness coupled with strong heat treated carbon steel; hardened and sharpened for a long lasting edge. Dual blade widths can be alternated depending on the task at hand.
Nupla designed these tips to be soft enough to protect your job surface, yet tough enough to last multiple jobs! Choose from either a brown, red, green faces depending on the job. Threaded faces allow for fast and easy replacement! Nupla makes these Quick-Change...
Threaded tips for easy replacement: Product Features
It also comes equipped with built in rubber grips and a hand guard to keep you safe and comfortable when working with natural stone. Wide cutting width. Of hex-shaped steel and features a 1 in.
Product Features
Built-in rubber grip and hand guard: Product Features
Handle length 13-3/4". One side is the Extreme Power Drive non-marring cast urethane face that protects the hammer from damage when striking unfinished or sharp metal surfaces and the opposite side is a steel face.
Specs
Product Features
Hammer face is 2" wide: Specs
Handle is 13 & 3/4" long: Specs
Rigid black grip: Product Features
Steel face on one side, urethane face on the other: Product Features
This club hammer features Fiskars' patented Isocore shock control system to reduce shock and vibration by 2 times. Reduced shock and vibration. Great for many one-handed tasks ranging from demolition to driving stakes.
It is perfect for hikers, campers, and outdoor enthusiasts! Fiskars combined perfected weight distribution and advanced blade geometry to create this tool. An ultra-sharp edge and virtually unbreakable design maximizes the performance of this blade.
Product Features
Product Benefits
Ideal for chopping kindling and small- to medium-sized logs: Product Benefits
Hardened forged steel blade stays sharp longer than traditional axes: Product Features
Shock-absorbing FiberComp handle is lightweight yet stronger than steel to prevent overstrike damage: Product Features
Included sheath helps protect blade and the user: Product Features
Inseparable insert-molded head prevents overstrike breakage and will not loosen: Product Features
Chops deeper with each swing to do more in less time: Product Benefits
Long vinyl grips are easy on the hands and long enough for two hands when needed. The 18" handles are of hickory which is the best choice for striking tool use due to its high strength.
Non-marking white face; 32 oz; Rubber face won't damage pavers and has been designed to minimize bounce when striking. Also ideal for tapping tile into thinset.
These faces are 2 in. Choose from either a black face for dirtier jobs or a white face for clean, non-marring work. Replacement face for the Vaughan VRRM Replace the face of your Vaughan 24-Oz Rubber Mallet.
Find them HERE . An industry staple! Seymour designed their Michigan Single Bit Axe with quality in mind! Choose from either a 3-1/2 or 5-pound bit below. Seymour equipped each of these axes with a sturdy 36-inch genuine hickory handle! Need an extra...
For Halder Simplex 80mm Mallets Choose from either a 16-inch standard style or a 28-inch sledge-style replacement handle for simplex 80mm mallets. Both handles are made of sturdy hickory wood.
Head with large smooth striking face, traction bars for reduced slippage and improved control when prying, as well as magnetic nail holder. Designed for driving, prying, splitting and pulling! Featuring a 24 oz.
It is also equipped with built in rubber grips and a hand guard to keep you safe and comfortable when working with stone. Of hex-shaped steel and features a cutting edge 2-1/2 in. Choose this chisel when working with brick and block! When you are working...
Product Features
Cutting edge is 2-1/2 inches (63 mm) wide: Product Features
Built-in rubber grip and hand guard: Product Features