Sprayer Fittings

Green Leaf 90 Degree Elbow Adapter FPT X Barb is used in fluid pluming applications requiring a 90 degree connection to a MPT fitting and a hose.

Norwesco Applicator Tank Lid 5 In. is a high-density polyethylene tank lid in black with a ball check air vent. It is for tanks manufactured after Feb.

The fitting will reduce the amount of hose required to make a 90 degree turn. Green Leaf Elbow Adapter Barb x Barb is used in fluid plumbing applications requiring the 90 degree connection of two hoses.

Norwesco EPDM Gasket for Cam Action Coupler is a replacement gasket.

Gator Lock Plug for Female Coupler is a polypropylene plug wit EPDM gasket.

Gator Lock Cap for Male Adapter has Green Leaf's patented locking system that provides an enhanced safety feature that allows fast and easy connecting and disconnecting of nozzles & hoses while reducing the possibility of unintentional spillage and leaks.

Green Leaf 90 Degree Elbow Adapter MPT x Barb is used in fluid plumbing applications requiring a 90 degree connection to a FPT fitting and hose.

Norwesco EPDM O-Ring Replacement for Y-Line Strainer, these strainers help protect and prevent clogging of pipelines, pumps and spray tips.

Gator Lock 90 Degree Male Adapter with Male Thread is a polypropylene coupling with EPDM gaskets. The exclusive Cam Lever Locking Mechanism helps to reduce the possibility of unintentionally opening the cam levers, which could result in personal injury...

No power transmission between tractor and tank, allows for tight turns. Low Volume Vineyard/Orchard Sprayer. 25% less spray product. Save 25% and more spray product. Low Volume means 200lit.

If you are looking for Agricultural Power Sprayers, Garden Power Sprayers, Disinfectant Power Sprayers or Pressure Washers, please click the above links for more information. Our spray machines product line can be divided into Cast Iron series and Aluminum...

Need approx 30 Tees, 20 90 degree elbows and 30 couplers M ale and female Please contact phone Thank you Ames 100 mm aluminium irrigation pipe fittings - Tees, 90 deg elbows, 45 degree elbows, couplers, plugs, springs and rubbers etc Ames hydrostatic...

I am using a differet type of supply line. I also have a 3\" layflat hose assembly for sale. Layflat end of fitting is slithgly out of round. I purchased a used hard hose traveler, and am using a different type of pipe.

All ProMax products have a UV resistant coating to prevent the cap from discoloring and are paintable to match the exterior of your home. The Dundas Jafine ProMax dryer vent kit is part of the ProSeries product line-up.

Not your typical horse trainer! I am looking to help clients who have a troubled, injured, rehabbed or young horse who want to get the tools and make the connection to work through difficult training obstacles.

In addition to being cost effective, these systems simplify the installation compared to copper or rigid plastic pipe systems that use solder or glue for fitting joints. The SharkBite PEX/Barb System includes everything needed, from pressure regulators...

Double sided plugs can plug holes from .16 to .235" in diameter. These handy goof plugs allow you to move around drip irrigation fittings and emitters by plugging the holes in the main line.

Punch creates a 1/8" hole. This handy, cost effective key punch is great for creating small pilot holes in header/mainline tubing to attach emitters and fittings.

Compatible with any of our Drip Irrigation Kits. If you want to reconfigure your irrigation system, or even if you just punched a hole in the wrong place, these goof plugs completely seal any hole in the header pipe.

The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to your system. These Power-Loc elbows for 1 inch irrigation header pipes allow you more flexibility and the ability to add 90 degree angles in your irrigation design.

These Power-Loc Tees for 1 inch header pipes allow you more flexibility in your irrigation system design. Tees allow you to split off from your main irrigation system's water line to water more than one area at a time.

These Power-Loc Tees for 3/4 inch header pipes allow you more flexibility in your drip irrigation system design. Tees allow you to split off from your main water line to water more than one area at a time.

These adaptors allow you to easily connect to your irrigation main line tubing to hose ends, filters and other irrigation attachments. One end features a standard ¾ in. Female hose end and the other a Power-Loc connector that tightens down onto the mainline.

Quickly install drip line valves!

Fix any damaged or leaky drip tape. Simply cute the drip line in two, removing the damaged area, then attach each end to the coupling. Creates a tight seal and allows the drip tape to function as normal.

The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system. These Power-Loc couplings for 1 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged tubing.