Snow Removal Parts Accessories Snow Removal Equipment For Sale In Canada

• ✓ Protects snow blower from damage
• ✓ NEW narrow-tip design penetrates snow and ice and lets you get down to the pavement

• Fits Brands: Any that have a 2 in. or 4.75 in. mounting bolt pattern.
• Returnable: 90-Day
• Product Height (in.): 3.25
• Part/Accessory Type: Skid Shoe/Mat

• ✓ Includes 4 shear pins and 4 clips
• ✓ Easy to install
• ✓ For MTD 300/500/600-series 2-stage snow blowers made in 2005 and later

• Manufacturer Warranty: None
• Fits Models: Fits MTD 300/500/600 series two-stage snow blowers, 2005 and after
• Product Width (in.): 2.75

• ✓ Simple and easy to replace
• ✓ Help prevent non budgeted expenditures for costly repairs to a vital piece of equipment in the midst of snow season
• ✓ Protect your investment and safety by shearing under stress
• ✓ Easily connect the auger to the auger shaft of both Stanley and Beast snow blowers

• Product Height (in.): 2
• Product Width (in.): 0.5

• ✓ Color: black
• ✓ Lifts snow blower up over cracks and bumps
• ✓ Set of 2 matching skids
• ✓ New dual tip design: narrow-tip on one end and wide-tip on the other end
• ✓ Original wide-tip design gives maximum float over gravel and grass

• Product Depth (in.): 12

• ✓ Ribbed design
• ✓ Includes 1 replacement belt
• ✓ Snow Joe product

• Part/Accessory Type: Drive Belt
• Fits Models: 323E

• ✓ Helps protect blower against damage
• ✓ NEW narrow-tip design penetrates snow and ice and lets you get down to the pavement
• ✓ Made from 1/4 in. steel plate for added durability
• ✓ Designed for cracked, uneven sidewalks and gravel driveways

• Manufacturer Warranty: 5 year warranty against bending or breakage.
• Returnable: 90-Day

Universal

• ✓ Genuine factory part
• ✓ Replaces O.E. # 931-2643

• Fits Models: Universal
• Fits Brands: Universal
• Manufacturer Warranty: None
• Returnable: 90-Day

SNOWBEAR

• ✓ Scrape delicate surfaces like natural stone without damage/scars
• ✓ An ideal accessory for your SNOWBEAR Plow

• Fits Models: SNOWBEAR
• Fits Brands: SNOWBEAR
• Manufacturer Warranty: 1 Year Limited
• Returnable: 90-Day

• ✓ with this headlight assembly, removing snow is both safer and easier no matter what the lighting conditions
• ✓ Replace your headlight assembly in just minutes, whether during the off season or in the middle of critical snow removal operations

• Product Height (in.): 4
• Returnable: 30-Day
• Fits Brands: Stanley, Beast
• Product Width (in.): 6

• ✓ Designed for Ariens deluxe series sno-thro models
• ✓ Manufactured to rupture at the designed load limits
• ✓ Purposely designed to snap if the auger jams or clogs
• ✓ 0.325 in. Dia bolt shank with 0.310 in. Dia thread

• Product Height (in.): 2.75
• Product Width (in.): 6.5

• ✓ Mushroom shoe design rotates 360 to eliminate catching unwanted objects
• ✓ All mounting hardware included
• ✓ Fits the path pro model 29000 and model 29100 ATV plows
• ✓ 1 year limited warranty

• Manufacturer Warranty: 1 year limited
• Fits Brands: Path Pro by Meyer

• ✓ This cold weather cab fits the following Honda HSS Series 2 stage snow blowers: HSS724A, HSS928A and HSS1332A
• ✓ Custom fit cover with Honda Logo
• ✓ Honda Genuine Snow Blower Accessory
• ✓ Cold weather cab frame is constructed of 16-Gauge 3/4 in. steel tube construction

• Returnable: 90-Day
• Product Height (in.): 46.50

• ✓ Made from 1/4 in. steel plate for added durability
• ✓ Original wide-tip design gives maximum float over gravel, grass and dirt, narrow-tip design penetrates snow and ice and lets you get down to the pavement
• ✓ Color: black

• Product Width (in.): 1.12
• Returnable: 90-Day
• Fits Brands: Any machine that as a bolt pattern 2.5" or 5" center to center

• ✓ Easy to install
• ✓ Includes all necessary hardware for replacement
• ✓ Includes necessary hardware to repair your snowblower scraper

• Returnable: 90-Day
• Fits Models: Toro CCR single stage snowblowers
• Part/Accessory Type: Skid Shoe/Mat

• ✓ Shave plate scoops snow into the augers allowing the paddles to throw snow away from the paved path
• ✓ Includes: (4) 710-0134 bolts and (4) 712-04064
• ✓ Replaces original manufacturer equipment parts starting with 931-08171*(_) / 731-08171(_)

• Returnable: 90-Day
• Product Width (in.): 3.25
• Product Height (in.): 1.75

• ✓ Kit includes 2 replacement paddles (Part # 117-7700)
• ✓ All necessary hardware for replacement included

• Fits Brands: Toro
• Returnable: 30-Day
• Fits Models: Toro Power Clear and Powerlite snowblowers (models 2010 and newer)

• ✓ Shoes are adjustable to raise or lower the snow blower housing off the ground
• ✓ Installation hardware included

• Product Depth (in.): 8.25 in
• Fits Models: Fits all Ariens Snow Blowers
• Product Height (in.): 1.5 in
• Manufacturer Warranty: 30 days

• ✓ Easily installed on either side of the auger
• ✓ Rotate downward, out of the way, when not needed
• ✓ Cut into snow drifts and direct snow into the snow blower for more complete removal
• ✓ Knife through iced-over snow drifts
• ✓ Help push away snow too high to enter the auger housing

• Product Depth (in.): 2

• ✓ Installation hardware included
• ✓ Fits models 939003, 920001, 921005, 921006 and 926027

• Fits Brands: Ariens
• Product Height (in.): 1.5 in
• Manufacturer Warranty: 30 days
• Product Depth (in.): 8.25 in

• ✓ OEM Original equipment
• ✓ Works with the Home Plow by Meyer
• ✓ Mounting hardware included
• ✓ Easy installation

• Fits Models: BL 240 BL 400
• Product Height (in.): 5

• ✓ Will help prevent salt and road debris from damaging vehicle grill and /or hood
• ✓ Heavy-duty linear actuator with internal clutch and chain lift
• ✓ For use on 84 in. SNOWBEAR snowplows
• ✓ Includes: 84 in. rubber deflector, mounting bar and hardware

• Fits Brands: SNOWBEAR
• Manufacturer Warranty: 1 Year Limited

• ✓ Genuine Toro parts ensure compatibility and quality
• ✓ Helps protect your driveway and sidewalk surfaces
• ✓ Made of ultra-high molecular weight polyethylene
• ✓ Kit contains two skids and necessary hardware for installation

• Fits Brands: Toro
• Manufacturer Warranty: 1-year

• ✓ Satisfaction guaranteed
• ✓ Universal mount works with most electric snow blowers
• ✓ Made from durable hardened plastic

• Fits Brands: Snow Joe
• Part/Accessory Type: Clean-Out Tool

• ✓ New duel-tip design: skids now have a narrow tip on one end, or can be turned around to use the wide tip on the other end
• ✓ Protects front of snow blower from damage due to cracks and bumps
• ✓ Offers a ski-like glide over uneven terrain like gravel driveways

• Requires Hub?: No Hub Required
• Fits Brands: Any machine that as a bolt pattern 2.5" or 5" center to center
• Part/Accessory Type: Skid Shoe/Mat

• ✓ Compatible with Toro Powerlite and CCR Powerlite Snowblowers
• ✓ Helps keep your snowblower operating efficiently over time
• ✓ Includes 1 replacement scraper (part # 75-8780)

• Part/Accessory Type: Snow Plow Kit
• Manufacturer Warranty: 1-year for residential use
• Returnable: 90-Day

• ✓ Includes: 88 in. rubber deflector, mounting bar and hardware
• ✓ Premium black powder coat
• ✓ Keeps snow spray off windshield and increases visibility
• ✓ Easily bolts onto existing holes on top of blade

• Fits Brands: SNOWBEAR
• Part/Accessory Type: Snow Plow Kit

• ✓ Provides an additional 4 in. of drop in frame to maintain correct plowing angle
• ✓ 324-128 drop kit is a simple bolt-on kit designed to lower the attachment point of your SNOWBEAR plow for optimum performance when plowing snow
• ✓ Fastens easily to existing plow frame
• ✓ Heavy-duty steel construction

• Product Depth (in.): 3
• Product Width (in.): 30