Attack heavy snow drifts with the Ariens Sno-Thro Deluxe Drift Cutters for Snow blowers. The cutter bars are designed to direct snow into your snow blower's auger housing (not included) for quick discharge.
✓ Compatible with sno-thro models 921005, 921006 and 926027
✓ Bars rotate down and out of the way for safe regular use
✓ Use to direct snow into your snow blower's auger housing not included for quick discharge
So you might as well keep a supply of shear pins on hand throughout the winter because sooner or later you will need to replace one. A shear pin (sometimes called a shear bolt) in a snow blower connects the auger to the shaft.
Use this shear bolt with Compact Series Sno-Thro and Sno-Tek models. This Ariens Sno-Tek 1/4 in. Compact Snow blower Shear Bolt will rupture at designed load limits and snap if the auger jams or clogs for safety.
✓ Compatible for use with Ariens compact series sno-thro and sno-tek models
Long, durable and flexible. This Toro specialty 120-Volt Electric Start Extension Cord is OEM recommended for use with all Toro electric start snowblowers. The cord is 10 ft. Suitable for use with other outdoor equipment and appliances as well.
✓ Suitable for use with outdoor appliances and equipment
Washers required (not included). By design, the leading edge of our skid is moved forward, to protect and gently lift snow blowers up over bumps. Note that the center slot is extra wide to handle off-set mounting bolts.
✓ Protects front of snow blower from damage due to cracks and bumps
✓ Made from 1/2 in. T plate steel (bottom runner)
✓ Lifts snow blower up over cracks and bumps
✓ Designed to lift snow blowers up over sidewalk cracks or bumps
✓ Original wide-tip design gives maximum float over gravel and grass
These skids are reversible for double the life. The kit contains two skids and the hardware necessary to complete the installation task. Constructed of ultra-high molecular weight polyethylene, the Toro Poly Skid Shoe Kit will help protect your driveway...
Pre-drilled, ready for installation. Includes all mounting hardware. Home Plow Urethane Cutting Edge Provides the rigidity of steel edges, and the noise reduction of rubber edges, while protecting sensitive surfaces.
So you can easily hoist it onto your snow-filled deck to clear out fast. Equipped with a heavy-duty, 2-blade rubber auger, the iON moves up to 495 lbs. Ideal for clearing snow from sidewalks, driveways and decks, the Snow Joe iON is the newest addition...
The discharge vanes offer 3 various positions that give you the option to choose which direction the snow will go. 12 Amp Electric Snow Shovel offers an efficient and eco-friendly solution to the snow buildup on your walkways, driveway and other paved...
These shear bolts fit MTD 2-stage snow blower models manufactured in 2004 and prior (except 33 in. The MTD Genuine Factory Parts Snow Blower Shear Bolts are designed to protect your snow blower from damage when the impeller comes into contact with a solid...
✓ Includes 4 bolts and 4 hex nuts
✓ Replaces shear bolts for model 710-0890
Fits Models: Two-stage snow thrower models, 2004 and prior (except 33" model E993I)
A breakthrough in snow blowing technology, the Power Max Anti-Clogging System (ACS) reroutes excess snow to prevent clogging and maximizes impeller speed and velocity. Power Max snow blowers are built tough with special hardened gearbox gears, designed...
Anti-clogging system (ACS) - prevents clogging and maximizes impeller speed and velocity: Yes
Snow Equipment Product Type: Two Stage Gas Snow Blower
Recommended for 6 in. The innovative Quick Stick control allows you to quickly and easily change chute direction and chute deflector with a single, smooth motion. If auger hits hard material, engine will stall to prevent damage.
✓ 32 in. clearing width and 21.5 in. intake height with drift breakers to plow through the deepest snow
✓ Electric start standard, starts easily with the push of a button
Of throwing distance. Clear snow like an absolute pro. The versatile control panel, remote chute control and 180 chute rotation makes your job simple. The heavy-duty steel frame and auger system will provide years of dependable service.
✓ Assembly required: estimated time 25 minutes
✓ 196cc snow engine with 24" clearing width
✓ Power-assist turning allows for easy maneuvering in snow
Our one-inch thick edge is formulated for long life. Today's pros are faced with many requirements and stipulations from their customers. Path Pro Polyurethane cutting edges provide the rigidity of steel edges, and the noise reduction of rubber edges,...
Includes a contoured handle that offers a firm, secure grip even with gloves on. If there is built-up snow and ice on the discharge chute and impeller of your Ariens Sno-Thro, the Clean-Out Spaded Tool is the perfect accessory to help remove it.
✓ Safety tool to remove ice and snow from discharge chute and impeller
✓ 5 in. W x 25 in. D x 5 in. H
✓ Helps remove built-up snow and ice
✓ Contoured handle prevents hands from losing their grip even in gloves or mittens