Skate Conveyor

To remove earth from basement max 1.5 feet large and 20 feet long ontario or quebec To remove earth from basement max 1.5 feet large and 20 feet long ontario or quebec

I would perfer an eight inch wide belt that runs flat. I have tried using the conveyor that rolls up inside a six inch tube but have found that the belt cuts thru the tube after about a year and a half.

Dryer systems are based on the use of belt dryer, single pass dryer or three pass dryer with an internal flighting system connected to a heat source at one end and a material separation / exhaust system at the other end.

Manure Spreader MODEL K G D 3 K G D 7 K G D 10 K G D 12 K G D 15 Capacity 3 M3 7 M3 10 M3 12 M3 15 M3 Lenght 5000 mm 6000 mm 7000 mm 7800 mm 8000 mm Width 2100mm 2300 mm 2300 mm 2300mm 2300 mm Height 2200mm 2400 mm 2600 mm 3100 mm 3400 mm Weight 2100...

2018 Akron GTT4010

2009 Brandt 1545LP $16,402.00

Used Batco 1314 with 5 HP electic motor. All new bearings!

8,000 bph, 4 years old, 7.5hp 1ph motor included, winch included

Brandt Conveyor 2021LP, Like New

NEW, Batco 1590

2018 Akron EXG300

2018 Akron EXG300

Model 1545 Tube Conveyor (Shown) 1525, 1530, 1535, 1540, 1545 Tube Conveyor Capacity Up to 6,000 BPH* *Capacity depends on material, moisture, density, and angle Tubing 10” Diameter Tubes Belt 15” 2 Ply Chevron Belt Speed Standard 600 FPM Top Drive...

6000 BPH 10" Diameter, 14 Gauge Tubing Steel or Stainless steel avaialble

6000bu/hr pit conveyor

Electric power 5hp. Portable cleated belt conveyor. 30ft long Capacity varies depending on angle of use. For use up to 40 degrees.

#D140 Blackwell 15' Conveyor

• 35° x 5" dia. • Drive, nip, pinch-rail, tail pulley guards. • Travel dimensions: 9'5" wide x 63' long x ' high. • 25hp electric motor drive with Leroy Somer 215 shaft mounted speed reducer.

13 1/2" Lagged directional head pulley with 2 3/16" diameter head shaft, Browning bushings and Sealmaster bearings. 6' receiving hopper with 6" rubber flashing. F.O.B.: Phoenix, AZ PRICE: $13,200

30" x 80' Truss Frame w/Radial Stacking Carrier

13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft, Browning bushings and Sealmaster bearings. CEMA "C" troughing and return rollers. 6' receiving hopper with 6" rubber flashing.

13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft, Browning bushings and Sealmaster bearings. CEMA "C" troughing and return rollers. 6' receiving hopper with 6" rubber flashing.

• 35° x 5" dia. • Belt speed approximately 320 FPM. • F.O.B.: Phoenix, AZ • PRICE: $23,900 • 15 HP electric motor drive with Leroy Somer 207 shaft mounted speed reducer. 30" x 63' Portable Conveyor w/ straight carrier Specifications: • Portable...

13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft, Browning bushings and Sealmaster bearings. CEMA "C" troughing and return rollers. 6' receiving hopper with 6" rubber flashing.

16" Lagged directional head pulley with 2 7/16" diameter head shaft. 2-ply belting with 3/16"x1/16" covers. F.O.B: Phoenix, AZ Optional Consideration: Radial undercarriage add $3,500 No undercarriage $15,900