Single Cow Milking Machine

Included in the assembly are 65 lb. Of Vacuum Tubing. Bucket, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft. Fully-approved high polish stainless steel Bucket has hand grip and reinforced bottom.

65 Lb. SS Bucket Assembly f/Two Cows

80lb SS Bucket Assembly f/ two cows

Included in the assembly are 80 lb. Of Vacuum Tubing. Bucket, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft. Fully-approved high polish stainless steel Bucket has hand grip and reinforced bottom.

It is set up ready to connect to any portable or bucket milker or to your vacuum and milk line. It is vented with valves and side to side pulsation. This bucket is complete with a cow claw.

NuPulse Bucket Milker ( 10150NP ) - All NuPulse Pail Milker Units come complete with a bucket, lid, hoses and NuPulse cow milker claw. The NuPulse units only use 1 line for milk and vacuum, therefore eliminating additional vacuum hoses.

Includes 4 inflations, 4 short air tubes, 32" x 5/8" clear milk hose, 37" x 9/32" twin rubber hose, 12' x 1/2" clear vacuum hose & Lid gasket. Ships free to Continental USA. Includes 2, 4, 12, 11, 20A, 23A.

Plated Handle Set w/Screws f/ Poly Bucket

5/8" ID, 13/64" Wall, 38 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

Surcingle Rod for Suspended Milkers weighs approximately 1 lb.

1/2" ID, 3/16" Wall, 30 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

9/16" ID, 7/32" Wall, 38 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

7/16" ID, 3/16" Wall, 28 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

3/8" ID, 1/8" Wall, 22 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

9/32" ID, 1/8" Wall, 14 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

9/16" ID, 7/32" Wall, 38 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

3/8" ID, 1/8" Wall, 22 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

1/2" ID, 3/16" Wall, 30 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

Surcingle is used to hold a Surge bucket milker in place under the cow. Long with 13 brass grommets. Our Surcingle is a heavy-duty strap with a corrosion resistant triangle.

7/16" ID, 3/16" Wall, 28 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

9/32" ID, 1/8" Wall, 14 lbs. Black milking machine tubing has good flexibility and resistance to kinking, tears and splits.

Coburn Milking Buckets are made out of fully approved, high polish stainless steel. Includes an additional handle at the bottom rim for ease of carrying and pouring. 80# (34 liters) with Long handle Wt. 14 lbs.

Lid has three 3/4" diameter nipples and will fit any Coburn poly or stainless steel bucket. Gasket included. Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic.

It features smooth seamless molded interior and a raised reinforcement ring at the bottom for strength and ease of gripping. Handle dimension from top of bucket to bottom of handle is 4-3/4" (120cm).

Lid features three 5/8" nipples and gasket is included. Clear Poly Lid is used for bucket milking for fresh cows and will fit any Coburn poly or stainless steel bucket or other buckets with top inside diameter from 6 3/4" to 8".

The two-nipple design features exceptional workmanship and fine polished stainless steel construction. Gasket is included. This milking lid has a locking handle for long-handle buckets.

Orbiter Cow Milking Assembly f/EcoMilker. For use with 3005033 and 3005035 EcoMilkers.