Portable Bucket Milking Machines Farm Supplies For Sale In Arizona

It features smooth seamless molded interior and a raised reinforcement ring at the bottom for strength and ease of gripping. Eco-Bucket has a stainless steel locking handle (long-style), snap-on handle attachment (fits either side of bucket) and molded-in...

Coburn Milking Buckets are made out of fully approved, high polish stainless steel. Includes an additional handle at the bottom rim for ease of carrying and pouring. Rim diameter is 7-1/16” ID by 7-3/4” OD.

Replacement Long Handle for 2609021 Deluxe Stainless Steel Milking Bucket.

Plated Handle Set w/Screws f/ Poly Bucket

Libero Clear Milking Lid was designed to enable the locking and unlocking of the lid without removing the hoses. Lid fits Delaval-style buckets including Coburn buckets 140411D, 140408D, MP120X, MP140X and and 2609022.

Stainless trap lid with 90's, 58" with checkball for short handle on bucket.

Plastic Knurled Nut for 4008043 and 4008097 Lids.

Clear Poly Lid is used for bucket milking for fresh cows and will fit any Coburn poly or stainless steel bucket or other buckets with top inside diameter from 6 3/4" to 8". Lid features three 5/8" nipples and gasket is included.

The design features exceptional workmanship and fine polished stainless steel construction. Lid fits buckets which measure 5.7" (145mm) between top of bucket and bottom of handle. ID of the lid is 7-/8".

The two-nipple design features exceptional workmanship and fine polished stainless steel construction. Lid fits buckets which measure 5.7" (145mm) between top of bucket and bottom of handle.

Order Milking Cluster separately. Included in the assembly are 40 lb. Poly Bucket, Storage Lid, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft. Of Vacuum Tubing.

Lid Gasket (6-3/4 " x 7-7/8 " x 5/16 ") for Universal Inside Flange 122 Milker.

Complete claw assembly that is included with the NuPulse Mini Milker. Includes set of inflations , shells, short air tubes, claw, hose and squeeze clamp. If you would just like the Original Standard Claw only, click here.

The two-nipple design features exceptional workmanship and fine polished stainless steel construction. Nipples are 5/8" ID and the ID of the lid rim is 7-7/8". Gasket is included. This milking lid is designed to fit all standard milker buckets, including...

The two-nipple design features exceptional workmanship and fine polished stainless steel construction. Nipples are 3/4" ID and the ID of the lid rim is 7-7/8". Gasket is included. This milking lid is designed to fit all standard milker buckets, including...

Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic. Lid has three 3/4" diameter nipples and will fit any Coburn poly or stainless steel bucket.

Order Milking Cluster separately. Included in the assembly are 65 lb. Bucket, D/L-style Milking Lid, Vacuum Pulsator (50:50 ratio), Adapter and 8 ft. Of Vacuum Tubing. Fully-approved high polish stainless steel Bucket has hand grip and reinforced bottom.

Lid fits buckets which measure 4.7" (120mm) between top of bucket and bottom of handle. Gasket is included. Inside dimension of rim is 7-7/8" ID. Fine polished stainless steel lid has two 9/16" ID nipples.

Lid Gasket (8-1/2" x 9-1/4" x 7/32") for McCormick Deering Large Top 13015C Milker.

Order Milking Cluster separately. Included in the assembly are 40 lb. Poly Bucket, Storage Lid, D/L-style Milking Lid, Vacuum Pulsator (50:50 ratio), Adapter and 8 ft. Of Vacuum Tubing.

PortaMilker Base Unit includes steel vacuum tank, lubricated Conde vacuum pump, spring-loaded vacuum regulator, vacuum cock, vacuum gauge, and large non-corrosive hard rubber 10 inch tires.

NOTE: Buckets are NOT INCLUDED with Base Units. The Coburn PortaMilkerII gives every dairyman the opportunity to use a highly efficient milking machine. Order Buckets and Milking Clusters separately from the number of options available.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 5/8" ID, 13/64" Wall, 38 lbs.

Order side plate MPXHP separately. Replacement Stainless Steel Milking Handle for MP120X or MP140X only.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 9/32" ID, 1/8" Wall, 14 lbs.

(37 kg) version features comfortable and well-balanced galvanized handles. 6-15/16" ID, 7-21/32" OD bucket rim is compatible with many commonly available milking lids and seals tightly with included solid storage lid.