Paccar Group

Our team members were among the first of the Canadian and USA pioneers that... Our team members were among the first of the Canadian and USA pioneers that achieved significant milestones in researching and developing land based contained aquaculture and...

Paccar Model PA56 Winch - Arrangement # 1382453

(USED) PACCAR MX13 Warranty: 180 Day Parts and Labor Assy#: APCRH12.9M01 Serial#: A-31791 Horsepower: 455 MX13, 455HP, EGR W/ JAKES , 570K

(USED) PACCAR MX13 Warranty: 180 Day Parts and Labor Serial#: Y043751 Horsepower: 455 MX13, 455HP, EGR W/ JAKES, MILES-329,335 BEARINGS INSPECTED

(USED) PACCAR MX13 Cast#: 1733593 Clutch: FLAT Clutch Sz: 15.5'' MX13 FLYWHEEL 10IN BORE P# 1733593

(USED) PACCAR MX13 Warranty: 180 Day Parts and Labor Assy#: APCRH12.9M01 Serial#: A-35780 Horsepower: 430 MX13, 430HP, JAKES, 535K BEARINGS INSPECTED

The Coburn Receiver Group starts with finely finished stainless steel components and adds a 3/4 HP Leeson Washguard tm motor for extended life in wet, humid environments. In addition to the superior Washguard tm motor, this receiver group has: 18" x 18"...

All receiver groups are not the same. In addition to the superior Washguard tm motor, this receiver group has: 18 x 18 Jar with two 3” inlets, one 1.5” outlet and 3” Vacuum Connection Heavy Duty Stainless Steel Jar Support, Motor Platform 12 Quart...

Moisture-proof water-resistant Solid State Liquid Level Control not including probe.

3" size with a clamp-type connection at each end. U-Bends are also available in 3" weld/weld and 4" clamp/clamp. J-Bends for moisture traps are available in 2" ferrule/thread, 3" ferrule/thread, 2" clamp/clamp, and 3" clamp/clamp.

Replacement Stainless Steel Cover for 12 quart Moisture Trap 12QMT.

(USED) PACCAR PX6 Blades: 9 diameter: 26 Dish : 2.5 PACCAR PX6 CW ROTATION, 9 BLADES, 3.5" PROJECTED WIDTH, 2.56' PILOT DIA, HORTON HUB, 26 FAN DIA, 2.2" DISH, 3.5' BOLT CIRLCE

The Coburn Receiver Group starts with finely finished stainless steel components and adds a 1 HP Leeson Washguard tm motor for extended life in wet, humid environments. In addition to the superior Washguard tm motor, this receiver group has: 18" x 18"...

3" Clamp X 3" NPT. Horizontal Moisture Trap comes complete with cover, gasket, clip and ball.

2-1/2" Ball f/ 2" Moisture Trap

Replacement trap body for 12 quart stainless steel Moisture Trap

4" Ball f/12 qt.

Probe only not including the Liquid Level Control.

Probe only not including the Liquid Level Control.

Trap has two 3" threaded inlets. Stainless steel Moisture Trap comes complete with trap body, cover, cover gasket, 3.5" diameter ball and cover clip.

Replacement Stainless Steel Cover for 6 quart Moisture Trap 6QMT.

(USED) PACCAR PX6 Cast#: 1919784 INTAKE MANIFOLD, CAST #1919784

Cylinder: Good; Lift Height: 130; Mast Condition: Good; Tire Size: 14; Bucket Type: Forks; Lift Capacity in LBS: 3000; Hour Meter Reads: 3797; City: Granite Falls; State: NC 1994 Hyster E30XL; Engine: Hyster Electric; WB: 60; Wheels: Steel; Overall Weight:...

(NEW) PACCAR PX7 LUBE, SPIN

(USED) PACCAR MX13 Clutch: FLAT Clutch Sz: 15.5 PACCAR MX13 FLYWHEEL, 10" BORE, 15.5" FLAT CLUTCH, NEEDS TURNED