This saw is extremely durable and reliable! The Norton Clipper 14-Inch High Speed Cut-Off Saw is fully equipped to handle the everyday performance of any jobsite. Its compact design allows for cutting in any position.
Chipper shredder four-wheel heavy gauge steel chipper shredder gives years of satisfaction! Powerful 10 hp Briggs and Stratton Intech engine offers maximum power. Shreds leaves, small brush, stalks, chips branches 3.5 inch wide.MOTOR FRT DELIVERY
A large capacity gas tank, heavy duty air filtration system, diaphragm purge pump carburetor, and 265 maximum RPM round out this powerhouse. Whether you are digging for small trees, fence posts, poles or large posts, this powerful auger can handle it...
This engine features X-Torq technology, allowing for lower fuel consumption and reduced exhaust emissions. When it is time to clean the air filter, a quick-release makes the process fast and easy.
Product Features
Product Benefits
Three-piece crankshaft: Product Features
Ergonomic rear handle: Product Features
LowVib system reduces vibration levels to the operator, lessening fatigue: Product Benefits
Smart Start engine and starter allow the machine to start quickly with minimal effort: Product Benefits
40.9 cc, 2.4 hp engine with X-Torq technology: Product Features
Transparent fuel indicator makes it easy to check fuel level: Product Benefits
Dynamic balance control. Available in 6 colors. Made in the USA. Fully adjustable. NOTE: This is the sling only. 1 Click - Easy on, Easy off. Reduces shoulder and body fatigue for amazing comfort! From Sims Vibration Laboratory.
Specs
Carabiner-clip on the end of the harness (to clip to an existing ring on your trimmer shaft) is 2 in long, opens 5/16": Specs
Available in black, camo, orange, green, yellow and pink: Specs
Shoulder harness is 2 & 1/4 in wide, nylon sling is 1 in wide: Specs
The Multi-Pro versatile external chuck design can be configured with optional chuck and anvil for driving 1.2-4 lb channel post, tent stake chuck, concrete form pin chuck, or 1-3/4-in to 2-1/2-in square sign post and square post sign anchor with a drive...
Specs
2 & 1/2in chuck size: Specs
1,720 BPM (blows per minute): Specs
4-stroke, 35.8 cc motor: Specs
Good for T-posts, ground rods, and stakes up to 2 & 3/8in diameter, and square stakes up to 2 & 1/2in diameter: Product Features
The 8in bar and chain makes it easy to trim branches. These G-Max high performance tools deliver fade-free power with no memory loss after charging. Eliminate the Hassle of Gas and Extension Cords! Powered by innovation, GreenWorks Cordless G-MAX 40V...
Specs
Lithium Ion 40 volt 2 amp battery: Specs
Aluminum shaft extends from 5ft to 8 ft: Specs
Weight approx 8 lbs without battery, 11 lbs with battery: Specs
Not available for online ordering, please call 1-800-543-8955 weekdays 8AM - 5PM for fast shipment! Superior cutting performance! 8 cutting edges shear, rather than tear, increasing quality of cut.
Portable and handy; Great multi-tool for in-the-field chainsaw repair or maintenance! Includes carrying case with belt loop. Small and Large flat headed screw drivers. Includes: 19 mm & 16 mm, 17 mm & 13 mm sockets.
Commercial grade air filter gives long operating time and trouble free use. The harness has wide shoulder straps. Features a 65.6cc, 4hp engine producing up to 236mph air speed. A powerful commercial backpack blower designed for demanding tasks! Large...
Attachment requires no additional drilling or fabrication. Use this easy to attach pad for delicate jobs! YARDMAX designed this stamping pad for use with their Plate Compactor #YC1390 .
Reduced-effort starting system for easy starting. Dual post chain break lever. Palm supports hand and provides leverage. Handle angle provides a natural wrist position while cutting.
An integral pressure gauge ensures you get the most optimal digging performance! Comfortable yet durable! AirSpade constructs the 2000 Series handle assembly using a lightweight yet rugged aluminum.
Equipped with carbide tipped pilot points and heat-treated replaceable blades! Badger plus augers and accessories. 2" dia, 36" overall lgth, full flighting
You can fold up the wheels for easy transport. A user-friendly, 3-point mounted handle absorbs vibration. A Briggs & Stratton 208cc OHV engine delivers 5,500 blows per minute for 3,000 pounds of compaction force.
Will not fit FS FS91, FS111, FS131 FS100, FS70 and FS56 or any other curved shaft trimmers and the newest Kombi models (KM) Fits straight shaft Stihl trimmers FS 55, 80, 85, 90, 94, 110 and 130.
14" diameter disk: Specs
Your string is still doing all the work, the guide simply holds your string in place as you walk down the edge: Product Features
Handheld blower intended for part-time or occasional work! It has a high air velocity for real power around the home, an auto return switch and a streamlined inline outlet that keeps it relatively light weight, less than 10 lb.
Specs
Product Features
16.91 fl oz fuel tank: Specs
Dry weight is 9.4 lbs: Specs
Air purge removes air from carb and fuel system for ease of starting: Product Features
28 cc engine: Specs
Sound level at operator's ear: 92 dB: Specs
Stop switch automatically returns to the ON position for easier starting: Product Features
A 4-1/2-inch Aero-Jet blade is also available for standard angle grinders. This blade provides a high quality finished cut on a variety of materials: Ceramic and stone tiles Granite Marble Other dense materials Choose from the traditional 14-inch size...
Choose from either lengths of either 10, 25, or 50 feet below. This hose also features convenient pre-mounted couplers. This hose stores flat to save you valuable space. Their ultra-lightweight design reduces worker fatigue.
Product Features
Specs
Inner diameter (inches): 1: Specs
Double jacket design for maximum durability: Product Features
Oil-resistant polyurethane material: Product Features
Chicago-style couplers: Product Features
Weight (pounds): Varies — see product page for details: Specs
Reach out and take out that branch! This Power Pruner attachment brings down branches 12 feet high and the 10-inch bar and chain cuts through sizable limbs. Heavy duty gear case and automatic oiler.
Fits head sizes 6-1/2 to 8. Protect yourself and your workers! AirSpade designed this face shield to provide full face protection with working with air-excavation tools. This face shield meets ANSI Z87+ standards when worn with safety glasses or goggles.
Husqvarna hedge trimmers are known for being powerful, precise and efficient. They all have Smart Start, an auto return stop switch, fuel pump and Low Vib. Has a 21.7cc, .hp engine with 24-in knife length.
Specs
93 decibel noise level: Specs
10 oz fuel tank: Specs
Dry weight 10 lbs: Specs
Low Vibe for lower vibrations on the hands: Product Features
This barrel allows for controlled excavation and soil aeration. This model provides a flow output of 60 cubic feet of air per minute (CFM). Harness the power of compressed air to change the way you care for your trees, shrubs, and flower beds! The HT144...
Product Features
Specs
Comfortable, dead-man trigger ensures safe operation: Product Features
Ergonomic, pistol-grip style handle with soft, rubber grip: Product Features
Short barrel simplifies close-in work: Product Features
10.5-inch diameter paddle rotates to clear a swath nearly 2 feet wide! 40:1 gear ratio to power through tough jobs. Paddle drums remove easily for cleaning and lubrication. Fits the Echo Power Source.
Available in 1200W or 3000W. Generous fuel tanks allow for extended run times. Never flat wheels allow for easy transportation. Includes hour meter to record engine run time for timely maintenance.
