New Equipment Harvest Equipment For Sale In Winsted

•Heavy duty frame •32” Tines are sleeved and constructed of 1 ½” square stress shaft •Tines tapered for easy penetration •Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength •Single 2”x 8” hydraulic...

•Heavy duty frame •32” Tines are sleeved and constructed of 1 ½” square stress shaft •Tines tapered for easy penetration •Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength •Single 2”x 8” hydraulic...

•Constructed of heavy duty 3” x 3” x ¼” steel frame •Two 49” German tempered (SHW) steel conus tines on the bottom •Spears are guaranteed for one year •Heavy duty universal mounting brackets.

•Constructed of ¼” plate steel with ¾” x 6” Cutting Edge weld on (bolt on options available) •½” x 4” wear plates on bottom for extra strength •Bucket sides higher for increased volume •Reinforced heavy duty universal mounting brackets; gusseted...

•Bucket constructed of 3/16" plate steel with ¾” x 6” cutting edge •Single 2” x 8” hydraulic cylinder •Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength •Half moon plasma cut end plates made from ½”...

•Bucket constructed of ¼” plate steel with ¾” x 6” cutting edge •Heavy duty grapples made from ½” plate steel •Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength •Two 2”x 8” hydraulic cylinders •Half...

•Inverted horizontal •Mount to universal skid steer •4" x 36" hydraulic cylinder •Splitting force of 20 ton at 3000 PSI •Splits up to a 36" log •Hoses and couplers included •Heavy duty double wall construction

•Constructed of heavy duty 3” x 3” x ¼” steel frame •Four 32” German tempered (SHW) steel conus tines on the bottom •Spears are guaranteed for one year •Heavy duty universal mounting brackets.

•Constructed of ¼” plate steel with ¾” x 6” Cutting Edge •Heavy duty case iron adapter cover with steel tooth •½” x 4” wear plates on bottom for extra strength •Reinforced heavy duty universal mounting brackets; gusseted top and bottom for...

*Low profile ¾” x 6” cutting edge, available with weld on or bolt on cutting edge. •Constructed of ¼” plate steel with ¾” x 6” Cutting Edge weld on (bolt on options also available) •½” x 4” wear plates on bottom for extra strength •Reinforced...

•Forks are 1 3/8” thick x 4” wide and 48” long •Frames are 47” wide •Forks are adjustable •Slide rail forks are 1 ¼” x 47” •Heavy duty 4,000 pound capacity •Reinforced heavy duty universal mounting brackets.

Great for rocks, stumps or trenches. •Includes three replaceable ripper teeth •Ripper teeth are 6” long •Constructed of two sleeved 24” conus tines •Single hydraulic cylinder •Reinforced heavy duty universal mounting brackets •Half moon plasma...

•Hydraulic (orbit) drive unit – low speed / high torque (med. Flow) •Digs 4 ½ to 5 feet deep without extensions •Direct drive – no chains •2” output round shaft •Reinforced heavy duty universal mounting brackets •Recommended 15 – 20 GPM •Augers...

Claw Bucket Grapple 84" and 96" standard sizes. Weld on cutting edge 3/4" x 6" or bolt on option available. Five removable 32" forged curved tines with sleeves. Complete with cylinder, hoses and flat faced couplers.

•Heavy duty frame •32” Tines are sleeved and constructed of 1 ½” square stress shaft •Tines tapered for easy penetration •Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength *Standard sizes 60", 66", 72"...

•Constructed of ¼” plate steel •Reinforced sidewalls •Reversible polyurethane cutting edge •Rubber edges require little maintenance since they are more forgiving than steel edges •Engineered for strength and optimal pushing capacity •Ideal for...

•The Brush Devil mower cuts small trees, brush and grass •Complete with heavy duty gear box •Powered by Parker motor •Torque at 3000 PSI •Requires 15 to 21 GPM /li> •Replaceable heat-treated updraft blades •Front and rear chain guards •Reinforced...

Hydraulic Tree and Root Puller •3" x 8" hydraulic cylinder and hoses •Flat faced couplers included •3000 PSI recommended •Heavy duty frame •Reinforced heavy duty universal mounting brackets •Teeth are constructed from Grade 50 steel •Pulls 5”...

*Standard sizes 58 ", 70" or 80"( 58" also available in a single grapple) •Constructed of 1” solid plate steel with plasma cut teeth in plate • Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods • Welded to...

•Frame constructed of ¼” 2”x 2” Square Tubing •Includes two receiver tubes •Pin type drawer bar on the bottom •Tri-ball hitch in top receiver (sizes 1 7/8”, 2” and 2 5/16”) •Reinforced heavy duty universal mounting brackets •Ideal for boats,...

•Constructed of heavy duty 3” x 3” x ¼” steel frame •Two 24” German tempered (SHW) steel conus tines on the bottom •One 49” German tempered (SHW) steel conus tine top center •Spears are guaranteed for one year •Heavy duty universal mounting...

•Constructed of ¼” plate steel with ¾” x 6” Cutting Edge (weld on or bolt on) •Perforated top for volume and great visibility •½” x 4” wear plates on bottom for extra strength •Reinforced heavy duty universal mounting brackets; gusseted top...

Runs off skid steer hydraulics.. Requires a minimum of 16 gallons per minutes Maximum of 30 gallons per minute Creates 20 to 40 horse-power off the power take off No need to modify power take off shafts Adjustable lower arms Comes with motor and hydraulic...

•Constructed of 1” solid plate steel Grade 50 with plasma cut teeth in plate •Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods •Welded to a heavy 3”x 4” x 3/8” angle iron top and bottom •Side plates are...

Sleeved Conus Tines – SHW with one year warranty

• Walk-Thru opening is 17 1/2 wide • Forks are 1 1/4” thick x 4” wide and 48” long • Frames are 47” wide • Forks are adjustable • Slide rail is 1 1/4” x 47” • Heavy duty 4,000 pound capacity per fork • Reinforced heavy duty universal mounting...

•Constructed of ½” plate steel with two 1 ½” solid shafts running through the bottom •½” Gussets welded in for extra strength •Heavy duty grapples made from ½” plate steel •Two 2”x 8” hydraulic cylinders •Reinforced heavy duty universal...