Milking Equipment Farm Supplies For Sale In Stockton

Includes Gaskets and Seal to repair old-style Delaval Milk Pump.

4-1/4 x 14" Schwartz Flannel Stock, 50 per box.

3-1/4 x 12" Schwartz Flannel Stock, 50 per box.

Repair Kit contains 1 each VH1001 Carbon Seal, VH1002 Ceramic Seal, VH1003 O-Ring, VH1004 4" Gasket new-style and VH1011 4" Gasket old-style.

Case of 10 boxes of 50 tubes weighs 18 lbs. 4-7/8"x17" Break-proof Tubes are designed for moderate to high pressure.

Stays transparent and resilient longer than plastic tubing. Silicone Milk Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria.

2-Blade Impeller f/ Milk Pump

Replacement Rubber Gasket for BR252 S.S. Nipple.

5/8" ID, 1" OD, 29 lbs. Smooth non-porous bore prevents build-up of butterfat or milksoil and is unaffected by strong cleaners and sanitizers. Strength, durability, flexibility and purity are the standards for TransflowM34R Dairy Tubing for milking machines,...

Case of 12 boxes of 100 socks weighs 16 lbs. 2-1/4"x12" Break-Proof Socks provide filtration for moderate to high pressure systems.

Milk metering and testing is useful to select high producing cows for future breeding, for advice on culling low producers and for checking results of supplementary feeding. The Waikato Milk Meter is an important management tool for the progressive dairymen.

Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it. The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum supply...

The accessory clips the air and milking tubes together to better balance the weight of the Vanguard underneath the udder. Alignment accessory is recommended for use with the Vanguard Milking Claw in particular when milking sheep.

Seal Kit f/BouMatic Milk Pump

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.

Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it. The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum supply...

7/8" ID, 1-3/8" OD, 54 lbs. Smooth non-porous bore prevents build-up of butterfat or milksoil and is unaffected by strong cleaners and sanitizers. Strength, durability, flexibility and purity are the standards for TransflowM34R Dairy Tubing for milking...

1-1/8" long for 2" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

After-market equipment. External Seal Kit for LC Thomsen #4, 5 or 6 Milk Pumps includes housing gasket, rotary seal assembly, ceramic seal and 2 impeller clips.

3/4" ID 1-3/16" OD, 40 lbs. Perfectly hygienic with a longer life span than other types of milk tubing when used properly, silicone tubing is as strong as plastic, more flexible than rubber, and can withstand -20° temperatures and boiling wash water.

Spring Retainer Washer

Bevel-seat recessless ferrule for 4" tubing is 1-1/2" long.

Part number "348-28" on schematic diagram.

For use with 1-1/2" milk line. "Blow-By" is eliminated even with large pump systems, sediment leakage is reduced, and installation of new filters is easier. Closed-end style side-discharge filters are used with sock filters rather than tubes, which has...

Check Valve for 140414A.

3/4" long for 1.5" OD tube. Glass-to-Stainless Steel Ferrule with Gasket Groove is made of Type 304 Stainless Steel with #4 Dairy Finish.

1-1/2" ID, 2-1/4" OD, 130 lbs. Smooth non-porous bore prevents build-up of butterfat or milksoil and is unaffected by strong cleaners and sanitizers. Strength, durability, flexibility and purity are the standards for TransflowM34R Dairy Tubing for milking...