Milk Line Washing Components Milking Equipment For Sale In North Dakota

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7102.

Coburn"s S.S. Distributor Tee is smooth and clean throughout for efficient water flow. Tubes are aligned for ease and convenience of hose handling.

Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock for automatic pre-sanitizing, door interlock and is CSA-approved.

50-60 Hz, .31 amp. May be plumbed directly to the drain. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). 115VAC with drip-proof motor enclosure.

Replacement pump tube with fittings, 8" piece."

45 Degree Tube Bend is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Bend for 3" OD tube features "B" dimension of 3".

Black Gasket, (top under slide) 5/8".

When ordering pumps for other applications, please specify type of liquid to be pumped, gallons per minute, feet of head (the height to which liquid must be pumped), motor voltage, hertz, phase and shaft size.

180 Degree clamp-end U-bend for 1.5" tube OD features "A" dimension of 4-1/2". Type 304 Stainless Steel.

Clamp-end Special Y for 2" tube OD features "A" dimension of 3-1/2" and "B" dimension of 7". Type 304 Stainless Steel.

45 Degree Tube Bend is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Bend for 2.5" OD tube features "B" dimension of 3".

The Coburn Lobe Pump Wash System helps prevent the build-up of milkfat and other residues on the lobes of the vacuum pump and protects the pump from rust and corrosion. Of chemical tubing.

Bevel-seat recessless ferrule for 3" tubing is 1-5/8" long.

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.

2" Blue Plastic Milk Valve features a 5/8" inlet.

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1.125" long for 1" OD Tube.

Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish. 1-3/8" long for 2.5" OD tube.

Solid End Cap for Bevel Seat is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 2" OD tube has 2.38" OD.

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 2.5" OD Tube.

It may be combined with the 8950 Timer Control Module for more functionality. Three-Pump Dispenser features three motor-driven peristaltic pumps each with 300 oz. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer...

Electropolished, Stainless Steel strap-on pipe nipple fits 1-1/2” to 3” pipe and is ideal for wash lines. For 5/8” ID milk hose.

Butt-Weld-end Special Y for 1.5" tube OD features "A" dimension of 2-3/4" and "B" dimension of 5-1/2". Type 304 Stainless Steel.

Rubber tri-clamp gasket for 2.5" OD tubing.

45 Degree Tube Bend is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Bend for 4" OD tube features "B" dimension of 4-13/16".

Teflon Tri-Clamp Gasket.

2-Blade Impeller f/ Milk Pump