Milk Line Washing Components Milking Equipment For Sale In Indianapolis

Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Tubes are aligned for ease and convenience of hose handling. Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow.

Shut-off plugs and parts available separately. 4" Wash Valve weighs 5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

Bender Diverter Valve - 240V

Long round wash and milk shut-off plug for 3a" line.

Replacement pump tube with fittings, 8" piece."

Intake orifice is 1-1/2". Wall or direct-mounted, air injector operates on 120 volts. Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Replaces Milk-Rite 7102. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups.

110V Motor f/Depend-O-Drain

Butt weld end tee for 1-1/2" tube has L-dimension of 2-1/4" and B-dimension of 4-1/2".

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.

Shut-off plugs and parts available separately. 2-1/2" Wash Valve weighs 2.5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which...

Ell for 3" OD tube features "A" dimension of 6-5/16" and "B" dimension of 6-13/16”. 90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other.

This model 4 Milk Pump has external seal, 1.5" clamp connection, 7/8" shaft and 1.5" milk outlet. Additional pump sizes, configurations and parts are available upon request. When ordering pumps for other applications, please specify type of liquid to...

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.Ferrule for 2" OD tube is 23/32" long.

It is easily installed on most lobed vacuum pump systems and is available with 120/230V electrical components to match the milking equipment automatic wash system. Of chemical tubing.

1-3/16" long for 2" OD tube. 1-1/8" long for 1.5" OD tube. 1-1/2" long for 4" OD tube. 1-7/16" long for 3" OD tube. 1-3/8" long for 2.5" OD tube. Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish.

Elbow for 2.5" OD tube features inner radius of 3.75" and center distance (C) of 4.25". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

Bevel-seat recessless ferrule for 2-1/2" tubing is 1-3/8" long.

Concentric Reducing Ferrule reduces from 2" to 1-1/2" tube and is 1-1/8" long.

Reducer from 3" OD to 2" OD tube is 4" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

Type 304 Stainless Steel. Clamp-end Special Y for 1.5" tube OD features "A" dimension of 2-3/4" and "B" dimension of 5-1/2".

Diverter Plug for 2" Glass Tee.

1-1/8" long for 2.5" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

Stainless Steel Slide for Blue Milk Valve.

Type 304 Stainless Steel. Clamp-end Special Y for 3" tube OD features "A" dimension of 5" and "B" dimension of 10".