Milk Line Washing Components Farm Supplies For Sale In Washington

Long round wash and milk shut-off plug for 2" line.

Shut-off plugs and parts available separately. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

RFE Silicone Grease f / Peristaltic Pump Tubing. Silicone Grease (Required when replacing Peristaltic Pump Tubes)

Shut-off plugs and parts available separately. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Intake orifice is 1-1/2". Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Three-Jar Dispenser includes hot and cold water valves, 25 ft. Of water hose, and sink bracket. Jars have a capacity of 30 oz. Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system.

Bender Diverter Valve - 120V

BUY BULK! FREE SHIPPING! Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Bender Diverter Valve - 240V

Short round wash and milk shut-off plug for 2" line.

Hardware is included. Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval. CIP components are sold individually, or as part of complete kit.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for Surge features Stainless Steel jetter rack and 120116 jetter cups.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for BouMatic features Stainless Steel jetter rack and 120117 jetter cups.

Shut-off plugs and parts available separately. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

3/4" long for 1.5" OD tube. Glass-to-Stainless Steel Ferrule with Gasket Groove is made of Type 304 Stainless Steel with #4 Dairy Finish.

Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval. The 120112 has rounded insert for holding the jetter cups. Hardware is included. Jetter Rack is sold individually, or as part of complete kit.

1.5" Blue Plastic Milk Valve features a 5/8" inlet.

Butt weld end tee for 1-1/2" tube has L-dimension of 2-1/4" and B-dimension of 4-1/2".

Ferrule for 3" OD tube is 29/32" long. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.

Bend for 2" OD tube features "B" dimension of 2-5/16". 45 Degree Tube Bend is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

Stainless Steel Nut for Blue Milk Valve.

1-7/16" long for 3" OD tube. Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish.

Rubber tri-clamp gasket for 1.5" OD tubing.

This model 4 Milk Pump has external seal, 1.5" clamp connection, 7/8" shaft and 1.5" milk outlet. When ordering pumps for other applications, please specify type of liquid to be pumped, gallons per minute, feet of head (the height to which liquid must...

2" Blue Plastic Milk Valve features a 5/8" inlet.