Milk Line Washing Components Farm Supplies For Sale In Tennessee

Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer and is CSA-approved. It may be combined with the 8950 Timer Control Module for more functionality.

Short round wash and milk shut-off plug for 2" line.

Long round wash and milk shut-off plug for 2" line.

Hardware is included. CIP components are sold individually, or as part of complete kit. Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7102.

This CIP Assembly for Surge features Stainless Steel jetter rack and 120116 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

115VAC with drip-proof motor enclosure. 50-60 Hz, .31 amp. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). May be plumbed directly to the drain.

Silicone Grease (Required when replacing Peristaltic Pump Tubes) RFE Silicone Grease f / Peristaltic Pump Tubing.

Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow. Tubes are aligned for ease and convenience of hose handling.

Shut-off plugs and parts available separately. 2-1/2" Wash Valve weighs 2.5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which...

Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down. Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing.

Shut-off plugs and parts available separately. 4" Wash Valve weighs 5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.

Butt weld end tee for 2" tube has L-dimension of 3" and B-dimension of 6".

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 1.5" OD tube features "A" dimension of 2-15/16" and "B" dimensionof 3-7/16".

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 2" OD to 1.5" OD tube is 2" long.

Surge-Style Roll-On Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish. For 2" OD tube.

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 2.5" OD tube features "A" dimension of 5-3/16" and "B" dimension of 5-11/16”.

Shut-off plugs and parts available separately. 2" Wash Valve weighs 2 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

Bend for 1" OD tube features "B" dimension of 1.888". Bend for 2" OD tube features "B" dimension of 2-5/16".Bend for 2.5" OD tube features "B" dimension of 3".Bend for 3" OD tube features "B" dimension of 3".Bend for 4" OD tube features "B" dimension...

Ferrule for 1.5" OD tube is 23/32" long. Ferrule for 2.5" OD tube is 27/32" long. Ferrule for 2" OD tube is 23/32" long. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the...

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 4" OD to 2" OD tube is 9-1/8" long.

This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 4" OD to 3" OD tube is 5-1/8" long.

1-3/8" long for 2.5" OD tube. 1-1/8" long for 1.5" OD tube. 1-7/16" long for 3" OD tube. 1-3/16" long for 2" OD tube. 1-1/2" long for 4" OD tube. Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish.

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 1" OD tube features inner radius of 1.5" and center distance (C) of 2".

5/8" Stainless Steel Reversed Gooseneck fits 150200A Sliding Milk Valve.