Agiseek home

Milk Line Washing Components Farm Supplies For Sale In San Francisco

Become a Partner
CIP Assembly w/ SS Rack & Tee f/ Surge
Prices start at : 51.07 USD / each

This CIP Assembly for Surge features Stainless Steel jetter rack and 120116 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.
  • Weight: 5 lbs
California
San Francisco
RFE Silicone Grease f / Peristaltic Pump Tubing
Prices start at : 46.80 USD / each

Silicone Grease (Required when replacing Peristaltic Pump Tubes) RFE Silicone Grease f / Peristaltic Pump Tubing.
  • Weight: 0.25 lbs
California
San Francisco
SS Distributor Tee w/ Vent--5/8\
Prices start at : 17.04 USD / each

Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow. Tubes are aligned for ease and convenience of hose handling.
  • Weight: 2 lbs
California
San Francisco
L5000 Plus Peristaltic Pump Panel
Prices start at : 884.40 USD / each

L5000 Plus Panel features stainless steel cabinet with new sloping design, snap-in pump heads, internal trigger module, and 20 oz/600ml per minute capacity. 115 volt 60 HZ. Each pump has a multi-time module to program on/off, run times and delay times...
  • Weight: 8.3 lbs
California
San Francisco
Fit-Em-All Jetter Rack Complete
Prices start at : 34.57 USD / each

Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval. The 120112 has rounded insert for holding the jetter cups. Hardware is included. Jetter Rack is sold individually, or as part of complete kit.
  • Weight: 1 lbs
California
San Francisco
Diverter Plug f/ 2\
Prices start at : 18.40 USD / each

Diverter Plug for 2" Glass Tee.
  • Weight: 0.19 lbs
California
San Francisco
2.5\
Prices start at : 88.88 USD / each

Long round wash and milk shut-off plug for 2" line.
  • Weight: 0.13 lbs
California
San Francisco
110V Motor f/Depend-O-Drain
Prices start at : 72.43 USD / each

110V Motor f/Depend-O-Drain
  • Weight: 7 lbs
California
San Francisco
1-9/16\
Prices start at : 4.46 USD / each

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7101.
  • Weight: 0.1 lbs
California
San Francisco
4\
Prices start at : 382.64 USD / each

Shut-off plugs and parts available separately. 4" Wash Valve weighs 5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...
  • Weight: 5 lbs
California
San Francisco
2.5\
Prices start at : 45.49 USD / each

Short round wash and milk shut-off plug for 2-1/2" line.
  • Weight: 0.13 lbs
California
San Francisco
3\
Prices start at : 74.40 USD / each

Short round wash and milk shut-off plug for 3a" line.
  • Weight: 0.13 lbs
California
San Francisco
Surge-Style Jetter Cup
Prices start at : 4.46 USD / each

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7100.
  • Weight: 0.1 lbs
California
San Francisco
Repl. Pump Tube w/Fittings f/L5000
Prices start at : 32.78 USD / each

Replacement pump tube with fittings, 8" piece."
  • Weight: 1 lbs
California
San Francisco
Lobe Vacuum Pump Wash System
Prices start at : 198.65 USD / each

The Coburn Lobe Pump Wash System helps prevent the build-up of milkfat and other residues on the lobes of the vacuum pump and protects the pump from rust and corrosion. The Cleaning System includes peristaltic pump with control, straight injector and...
  • Weight: 3 lbs
California
San Francisco
LVP 5600 Cleaner--5 Gallon Pail
Prices start at : 77.42 USD / each

Five-gallon pail. Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.
  • Weight: 60 lbs
California
San Francisco
Depend-O-Drain
Prices start at : 131.55 USD / each

Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). May be plumbed directly to the drain. 115VAC with drip-proof motor enclosure.
  • Weight: 2 lbs
California
San Francisco
Type 304 Kleen Flo Butterfly Valve 2.5\
Prices start at : 190.00 USD / each

This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.
  • Weight: 3 lbs
California
San Francisco
180-Degree U-Bend (Weld/Weld)--2\
Prices start at : 75.56 USD / each

180 Degree butt-weld U-bend for 2" tube OD features "A" dimension of 6". Type 304 Stainless Steel.
  • Weight: 0.38 lbs
California
San Francisco
Short Ferrule (Clamp/Weld)--4\
Prices start at : 18.32 USD / each

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other. Ferrule for 4" OD tube is 5/8" long with 4" ID.
  • Weight: 0.25 lbs
California
San Francisco
Smooth Approved Barbless Tee
Prices start at : 3.24 USD / each

This smooth, white Tee is made out of food-grade plastic.
  • Weight: 0.5 lbs
California
San Francisco
Seal Kit f/New-Style Westfalia Milk Pump
Prices start at : 58.05 USD / each

Seal Kit f/New-Style Westfalia Milk Pump
  • Weight: 0.75 lbs
California
San Francisco
SS Nut f/ Blue Milk Valve
Prices start at : 0.96 USD / each

Stainless Steel Nut for Blue Milk Valve.
  • Weight: 0.13 lbs
California
San Francisco
Special Y (Weld/Weld/Weld)--3\
Prices start at : 143.71 USD / each

Butt-Weld-end Special Y for 3" tube OD features "A" dimension of 5" and "B" dimension of 10". Type 304 Stainless Steel.
  • Weight: 0.75 lbs
California
San Francisco
Black Gasket (Top Under Slide)--5/8\
Prices start at : 7.35 USD / each

Black Gasket, (top under slide) 5/8".
  • Weight: 0.38 lbs
California
San Francisco
Concentric Reducer (Weld/Weld)--4\
Prices start at : 83.93 USD / each

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.Reducer from 4" OD to 2.5" OD tube is 6" long.
  • Weight: 0.5 lbs
California
San Francisco
90-Degree Elbow (Clamp/Clamp)--1.5\
Prices start at : 32.71 USD / each

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 1.5" OD tube features inner radius of 2.25" and center distance (C) of 2.75".
  • Weight: 0.5 lbs
California
San Francisco