Milk Line Washing Components Farm Supplies For Sale In Nashville Davidson

110V Motor f/Depend-O-Drain

This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Silicone Grease (Required when replacing Peristaltic Pump Tubes) RFE Silicone Grease f / Peristaltic Pump Tubing.

Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down. Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7100.

Long round wash and milk shut-off plug for 3a" line.

L5000 Plus Panel features stainless steel cabinet with new sloping design, snap-in pump heads, internal trigger module, and 20 oz/600ml per minute capacity. Each pump has a multi-time module to program on/off, run times and delay times from 1 second to...

Long round wash and milk shut-off plug for 2" line.

Replacement pump tube with fittings, 8" piece."

This smooth, white Tee is made out of food-grade plastic.

It may be combined with the 8950 Timer Control Module for more functionality. Three-Pump Dispenser features three motor-driven peristaltic pumps each with 300 oz. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer...

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7102.

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 2.5" OD Tube.

Butt weld end tee for 3" tube has L-dimension of 3-1/4" and B-dimension of 6-1/2".

Ferrule for 2.5" OD tube is 27/32" long. Ferrule for 2" OD tube is 23/32" long. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.

Butt weld end tee for 4" tube has L-dimension of 3-7/8" and B-dimension of 7-3/4".

Butt weld end tee for 2-1/2" tube has L-dimension of 3" and B-dimension of 6".

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other. Ferrule for 3" OD tube is 29/32" long.

Internal Seal Kit for LC Thomsen Milk Pump. Includes 3 shaft O-rings, 1 head O-ring, 1 rotary seal spring, 1 teflon rotary seal and 2 impeller clips.

Round Gasket, 5/8" for Blue Milk Valves.

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 2" OD tube features inner radius of 3" and center distance (C) of 3.5".

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 1" OD Tube.

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.

Solid End Cap for Tri-Clover line is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 2.5" OD tube has 3.05" OD.

Butt-Weld-end Special Y for 2.5" tube OD features "A" dimension of 4-1/4" and "B" dimension of 8-1/2". Type 304 Stainless Steel.

Bevel-seat recessless ferrule for 4" tubing is 1-1/2" long.

Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow. Tubes are aligned for ease and convenience of hose handling.