Milk Line Washing Components Farm Supplies For Sale In Jacksonville

Shut-off plugs and parts available separately. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system. Jars have a capacity of 30 oz. Three-Jar Dispenser includes hot and cold water valves, 25 ft.

Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing. Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down.

Intake orifice is 1-1/2". Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Long round wash and milk shut-off plug for 2" line.

Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second to 45 minutes. Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical...

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120115 Jetter Cups for DeLaval and IBA.

L5000 Plus Panel features stainless steel cabinet with new sloping design, snap-in pump heads, internal trigger module, and 20 oz/600ml per minute capacity. LEDs are added to help diagnose washer trigger supply issues.

50-60 Hz, .31 amp. 115VAC with drip-proof motor enclosure. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). May be plumbed directly to the drain.

A complete pipeline washer may be made by combining the Timer Control Module with the 9740 Three-Jar or the 9590 Three Pump Dispenser. Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock...

Tubes are aligned for ease and convenience of hose handling. Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow.

Bender Diverter Valve - 240V

2" rubber gasket for Surge stainless steel pipeline.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups.

Bender Diverter Valve - 120V

Clamp end tee for 2" tube has A-dimension of 3-1/2" and B-dimension of 7".

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Elbow for 1.5" OD tube features inner radius of 2.25" and center distance (C) of 2.75". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic.

Elbow for 3" OD tube features "C" dimension of 2-3/8". 45 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

Ell for 4" OD tube features "A" dimension of 8-5/16" and "B" dimension of 8-15/16". 90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other.

End cap for 3" OD tube has 3.58" OD. Solid End Cap for Tri-Clover line is made of Type 304 Stainless Steel with #4 Dairy Finish.

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.

Type 304 Stainless Steel. 90 Degree tube bend for 1.5" tube OD features "A" dimension of 2-15/16".

Elbow for 1.5" OD tube features "C" dimension of 1-7/16". 45 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

Elbow for 3" OD tube features inner radius of 4.5" and center distance (C) of 5". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

Not recommended for applications where pressure exceeds 150 psi. This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection.