Milk Line Parts Milking Equipment For Sale In Thousand Oaks

Butt weld end tee for 1-1/2" tube has L-dimension of 2-1/4" and B-dimension of 4-1/2".

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.

Ferrule for 1.5" OD tube is 1/2" long with 1.375" ID. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other.

Type 304 Stainless Steel. Butt-Weld-end Special Y for 2.5" tube OD features "A" dimension of 4-1/4" and "B" dimension of 8-1/2".

Screw for Blue Milk Valve.

Seal Kit f/Old-Style Surge Milk Pump - Includes carbon seal, rubber seal, small e-clip, try clamp flapper, surge style flapper, large 4" head gasket, 1/12" gasket.

Bend for 2.5" OD tube features "B" dimension of 3". 45 Degree Tube Bend is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

2-Blade Impeller f/ Milk Pump

Seal Kit f/New-Style Westfalia Milk Pump

End cap for 2" OD tube has 2.52" OD. Solid End Cap for Tri-Clover line is made of Type 304 Stainless Steel with #4 Dairy Finish.

Type 304 Stainless Steel. 90 Degree tube bend for 2.5" tube OD features "A" dimension of 5-3/16".

Type 304 Stainless Steel. 90 Degree tube bend for 3" tube OD features "A" dimension of 6-5/16".

Type 304 Stainless Steel. 180 Degree clamp-end U-bend for 2" tube OD features "A" dimension of 6".

End cap for 4" OD tube has 4.68" OD. Solid End Cap for Tri-Clover line is made of Type 304 Stainless Steel with #4 Dairy Finish.

Not recommended for applications where pressure exceeds 150 psi. This high-quality butterfly valve for 4" tube is made of type 316 Stainless Steel for clamp connection.

Seal Kit f/BouMatic Milk Pump

Ell for 1.5" OD tube features "A" dimension of 2-15/16" and "B" dimensionof 3-7/16". 90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other.

Rubber gasket with #10 mesh stainless steel screen for 1.5" ID Tube

Bend for 4" OD tube features "B" dimension of 4-13/16". 45 Degree Tube Bend is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

1-1/2" rubber gasket for Surge stainless steel pipeline.

Bevel-seat recessless ferrule for 3" tubing is 1-7/16" long.

1-1/8" long for 2" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

Type 304 Stainless Steel. 180 Degree butt-weld U-bend for 2" tube OD features "A" dimension of 6".

Ferrule for 3" OD tube is 29/32" long. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.

1.5" Blue Plastic Milk Valve features a 5/8" inlet.

Rubber Retainer Cap for in-line filters.